submersible pump Equipment in Northwest Territories

Serving Northwest Territories | Near Northwest Territories
326 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: submersible pump ×

  • Location: Canada ×

  • Location: Northwest Territories ×

Crisafulli Submersible Hydraulic Pumps

by SRS Crisafulli, Inc.     based in Glendive, MONTANA (USA)

Crisafulli offers 53 standard models of its hydraulic submersible self-priming pumps in sizes from 2 inches to 10 inches, with flow capacities between 200 GPM and 3,800 GPM, Total Dynamic Heads (TDH) between 10 feet and 120 feet, and Solids Passing Capabilities to 3 inches. Custom models up to 24 inches and 18,000 GPM Flows are offered too.

Shakti Pumps - Submersible Pumps

by Shakti Pumps (I) Ltd     based in Pithampur, INDIA

Shakti submersible pumps are manufactured from the superlative quality raw material using advanced fabrication technology, which ensure optimum performance and excellent quality.Submersible Pumps50 HZ Pumps : Our Product Range100 mm well size (4”)150 mm well size (6”)200 mm well size (8”)200 mm well size (10”)250 mm well size (12”)300 mm well size ...

Submersible Pumps

by GWE pumpenboese GmbH     based in Peine, GERMANY

Special pumps for ground water monitoring type MP 1.

EBARA - Model DMLU - Submersible Pump

by Burt Process Equipment, Inc.     based in Hamden, CONNECTICUT (USA)

A new, economical alternative, the model DMLU non-clog, single channel impeller pumps are suitable for use in commercial and industrial waste water applications. The Model DMLU is constructed of robust cast iron with a large diameter, short overhang shaft and stainless steel fasteners. The single channel impeller has 3'' spherical passage and also ...

Pedrollo - Model 4SR - Submersible Pumps

by Electrical & Pump Services Ltd (EPS)     based in Mallow, IRELAND

Our range of 4” borehole pumps will fit 4” or larger boreholes or shallow wells. Flow rates from 5 lpm to 375 lpm. Head up to 500 mtrs”. Recommended for pumping clean water with a sand content no higher than 150 g/m3. Suitable for use in the domestic, civil and industrial sectors, including for water supplies as part of a ...

Subteck - Model RI 4 and 6 - Submersible Pumps

by Electrical & Pump Services Ltd (EPS)     based in Mallow, IRELAND

Submersible pumps for deep wells of 6inch or greater diameter. Sized for connection to 4” Franklin motors up to 7.5 kw and 6” Franklin motors to 37 kw. Flow rates from 50 lpm to 950 lpm. Heads up to 350 m3/hr. Recommended for pumping clean water with a sand content no higher than 100 g/m3. High efficiency pumps with stainless shell and ...

Solar West - Submersible Pumps

by Solar West     based in Calmar, ALBERTA (CANADA)

Solar West uses high quality Lorentz pumps that are stainless steel with a brushless design. Each submersible pump includes:  75’ of power cord and a low water sensor for deep well applications. Also available is a float for open access water applications. All Solar West pumps are built without a check valve allowing for water to ...

SEI - Model 4 Inch. - Submersible Pump

by Submersibles and Electric Inc. (SEI)     based in Phoenix, ARIZONA (USA)

Water pumps for deep wells Submersible Pump of 4' Dia. Sized for connection to the motor according to NEMA standards. Stainless steel discharge head with built-in non-return valve. High Efficiency stainless steel Bowls and Impellers. Stainless Steel motor connector. Stainless Steel pump casing. Stainless steel pump shaft, coupling and wire guard. ...

Model IM10 - Submersible Pumps

by Subteck     based in S.Vito al Tagliamento (PN), ITALY

Construction: Submersible motor pumps for deep wells of 4″ (DN 100 mm), with turbine impeller. The stainless steel hydraulics end special plastic materials, prevent the impeller jamming, even after an extenden stoppage. Thanks to special construction features, both installation and maintenance of IM 10 are fast and easy. Delivery port G 1.

Tsurumi - Model LB480, LB800 & LB1500 - Submersible Pumps

by Tsurumi Pumps     based in Glendale Heights, ILLINOIS (USA)

The Tsurumi LB480, Tsurumi LB800 and Tsurumi LB1500 offer ultimate durability and are suitable for periods of continuous use and can withstand operator abuse. The strainer base and body are manufactured from tough and durable pressed steel to ensure a lifetime of operation during robust handling.

Need help finding the right suppliers?

Let the XPRTs do the work for you