turbine pumps Equipment in Australasia

Served | Office inNear
99 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: turbine pumps ×

  • Location: Australasia ×

Hydropower Screw Turbines

by Landustrie Sneek BV     based in Sneek, NETHERLANDS

The new range of the Landustrie screw pump covers the hydropower screw turbines for generating renewable energy. An efficient use of water power is already achieved at a level difference of 1 meter and a capacity of 500 l/sec. The largest capacity and level difference for hydropower screws is as much as 15000 l/sec. at 10 meter. Unique feature of ...

Liquid jet vacuum pump

by Körting Hannover AG     based in Hannover, GERMANY

Liquid jet vacuum pumps suck off gases and/or vapours from a process. The lowest possible suction pressure in the reactor is only limited by the vapour pressure of the motive liquid. It is possible to compress to atmospheric or even higher pressure.

Albin - Model RB - Internal Gear Pumps

by Albin Pump SAS     based in Mölndal, SWEDEN

To come up with a really good product demands plenty of knowledge and fresh, innovative ideas. Yet most important of all is to listen to our customers needs and requirements. So that we can see what can be improved and identify things that are not working optimally. Only then can we create something new - and that actually makes a big difference ...

Model MDT Series - Non-Metal Magnetic Drive Turbine Pumps

by Iwaki Pumps     based in Tokyo, JAPAN

Seal-less construction: Thanks to magnet drive seal-less construction, no liquid leaks and no shaft seal replacement is required. High pressure/high vacuum: Small size but high pressure up to 0.35MPa is available. It can be used for negative pressure of suction side because it makes suction pressure up to 8.00kPa.

Plad - Model GPM - Vertical Turbine Pumps

by Plad Equipment Ltd.     based in Bois des fillions, QUEBEC (CANADA)

The total head shall include the pump discharge pressure at the discharge flange centerline, the pump column and discharge head losses, as well as the vertical lift below the centerline of the discharge flange. The vertical turbine pump discharge head shall be fabricated of carbon steel featuring a minimum of 60,000 psi tensile strength and shall ...

Model VT Type - Vertical Turbine Pumps

by Plad Equipment Ltd.     based in Bois des fillions, QUEBEC (CANADA)

Plad manufactured a complete line of vertical, multi-stage turbine pumps with steel fabricated head assembled with premium efficiency inverter duty vertical hollow shaft motors.. Bowl Sizes to 24 inches (610 mm).Flows to 12,500 GPM (785 l/s).Heads to 400 ft (120 meters) .Horse power to 700HP (525 Kw) Plad offers three type of vertical turbine ...

Pump Hydro Turbines

by Alstom     based in Levallois-Perret Cedex, FRANCE

Pump turbines can respond almost instantly to sharp variations in power demand.We are able to provide a solution adapted to our customers’ specific needs -- wherever they are located in the world.Our complete line of pump turbines are suited for heads ranging from 5 m to 1,200 m with production potential ranging from 50 MW to 500 MW for all ...

Speck Pumpen - Model NPY-2251-MK-HT - Heat Transfer Pump

by Speck-Pumpen Walter Speck GmbH & Co KG     based in Roth, GERMANY

Suitable for the delivery of gas shares.Steep characteristic curve.High pressures with compact design.Leakage-free and maintenance-free due to magnetic coupling.Possible reverse operation

Speck Pumpen - Model Y-1638-MM - Small Regenerative Turbine Pumps

by Speck-Pumpen Walter Speck GmbH & Co KG     based in Roth, GERMANY

Closed coupled version.Parameters set by the manufacturer.Power consumption depending on load and speed.Within the displayed characteristic curve (see the graphic at the right), every operating point can be selected by parameterizing the drive accordingly.Hydraulics 0,5 – 9,0 l/min.7 – 57 m.

Speck Pumpen - Model T-201 / T-401 / T-601 - Vertical Pump

by Speck-Pumpen Walter Speck GmbH & Co KG     based in Roth, GERMANY

vertical pumps submersion depths: 110, 130, 150, 180, 200 mm.Motor 0,5 kW, 3~Mot.Tempering of tool moulds.Cooling of machines, systems and production processes.Cooling of industrial lasers.Temperature control of control cabinets

Need help finding the right suppliers?

Let the XPRTs do the work for you