wastewater pumps Equipment in West Virginia

Serving West Virginia | Office in West VirginiaNear West Virginia
300 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Water & Wastewater Pumps ×

  • Keyword: ×

  • Location: USA ×

  • Location: West Virginia ×

ELRO - Model Series XP - Peristaltic Pumps

by CRANE ChemPharma & Energy     based in Düsseldorf, GERMANY

The newly developed ELRO® peristaltic pumps of the XP series provide a high flow rate at low speeds. The large peristaltic hose cross section enables the delivery of media with very high solids content. The XP series is equipped as standard with the newly developed vacuum system integrated directly into the pump housing. The highly engineered ...

Model Type ABS Sanisett 1 and 2 - Lifting Station

by Sulzer Ltd     based in Winterthur, SWITZERLAND

The Sanisett 1 and 2 are single and twin pumping stations designed as a complete wastewater sump for above- or below-ground use. They provide effective dewatering of fecal-free domestic and commercial wastewater, from buildings and areas below the sewer level in accordance with EN 12050-2.

NETZSCH TORNADO - Mobile Rotary Lobe Pump

by NETZSCH Group     based in Selb, GERMANY

A TORNADO rotary lobe pump fastened onto a mobile base – this is the NETZSCH TORNADO Mobile. The concept of mounting the equipment onto a car or truck trailer makes it possible to pump large quantities of fluids with solid content, wastewater and slurries at the most unusual of sites. Based on the given application, a TORNADO rotary lobe ...

Netzsch Tornado - Mobile for Rotary Lobe Pump

by NETZSCH Pumpen & Systeme GmbH     based in Waldkraiburg, GERMANY

A TORNADO rotary lobe pump fastened onto a mobile base – this is the NETZSCH TORNADO Mobile. The concept of mounting the equipment onto a car or truck trailer makes it possible to pump large quantities of fluids with solid content, wastewater and slurries at the most unusual of sites. Based on the given application, a TORNADO rotary lobe ...

Stancor - Model CB 2002 - Standard Duplex Pump Control Systems

by Stancor Pumps Inc.     based in Monroe, CONNECTICUT (USA)

NEMA 4X Corrosion Resistant, Outdoor rated Enclosure. Individual Pump Circuit Breakers. Individual Pump Contactors. Transformer. Automatic pump alternator. Separate fused Control Circuit. Green Pump Run Lights (each pump) (Door Mounted). Manual-Off-On-Auto Selector Switch (each pump) (Door Mounted). Individual Terminals For Field Wiring Circuit ...

Sulzer - Model AS - ABS Submersible Wastewater Pump

by Kappe Associates, Inc.     based in Frederick, MARYLAND (USA)

Robust, reliable, ABS submersible sewage and wastewater pumps from 1 to 3 kW for the dewatering of buildings and sites in private, commercial and communal areas as well as industrial applications. Water pressure-tight encapsulated fully flood-proof motors in standard or explosion-proof versions. Hydraulics with ContraBlock system or vortex ...

TitanSX - Progressing Cavity Pumps & Parts

by Tarby, Inc.     based in Claremore, OKLAHOMA (USA)

The TitanSX series of progressing cavity pumps and parts are designed as drop in replacements for the Seepex BN series. The TitanSX can easily handle fluids from thin, flowable liquids to highly viscous materials and solids in suspension, satisfying extensive application requirements across a broad range of industries.

Century - Model III Series - Progressing Cavity Pump

by Tarby, Inc.     based in Claremore, OKLAHOMA (USA)

Design: Pin driven, industrial pump. Flow Rates: Flow capacities to 400 GPM/1.51m3/min.. Pressures: Pressures to 760 PSI/52.4 bar. Construction: Available in cast iron or stainless steel (internally and externally).

Famouss - Model WG, WGF, WD, WDF Series - Sewage Pump

by Hebei Famouss Pump Co.,Ltd.     based in Shijiazhuang, CHINA

This series of pump outlet direction can be arbitrarily changed by 45 degrees intervals. Shaft seal  generally uses packing seal. F type pump is with asbestos packing or mechanical seal. Bearing use oil lubrication. Advanced design, novel and compact structure, small volume, high efficiency, convenient use and maintenance make the pump series a ...

Model DMLEU - Submersible Sewage Pump

by EBARA Fluid Handling     based in Rock Hill, SOUTH CAROLINA (USA)

The model DMLEU non-clog, single channel impeller pumps are suitable for use in commercial and industrial wastewater applications and are an economical alternative to other competitive submersible wastewater pumps. The Model DMLEU is constructed of robust cast iron with a large diameter, short overhang shaft and stainless steel fasteners. The ...

Need help finding the right suppliers?

Let the XPRTs do the work for you