adjustable weirs Equipment in Nepal

Serving Nepal | Near Nepal
52 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: ×

  • Location: Asia & Middle East ×

  • Location: Nepal ×

Overflow Weir

by BÜSCH Technology GmbH     based in Nürnberg, GERMANY

Size: 1000 x 150 mm up to 3500 x 1000 mm, sealing to 3 sides. For mounting with chemical anchor bolts and concrete.The function of overfall weirs is to adjust great water volumes to a constant level with a small adjusting range. Overfall weirs 3-lateral sealed, the weir is bedded on the bottom of the channel and two side shields which will be ...

LWS - Model 1300 - Free-Floating Offshore Weir Skimmer

by Lamor Corporation AB     based in Porvoo, FINLAND

The Free-Floating Offshore Weir Skimmer (LWS 1300) is a very high capacity weir skimmer designed for offshore oil recovery operations. It is equipped with a floating weir lip to separate and collect the oil into the hopper. The floating weir lip has separate small ballast weights that can be independently adjusted for perfect floatation even in ...

Adjustable Weir


Adjustable weirs are mostly utilised for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open upwards.

Model Series 900 - Stainless Steel Gates

by Whipps, Inc.     based in Athol, MASSACHUSETTS (USA)

Series 900 Stainless Steel Gates offer high performance and long life in designs which accommodate a wide range of mounting arrangements and flow conditions. Rugged, rein forced stainless steel construction is combined with tough, flexible ultra high molecular weight polyethylene (UHMW) seat/seals, to provide a heavy-duty assembly. Flush bottom ...

VA Teknik - Outlet Weirs

by VA Teknik i Borås AB     based in Borås, SWEDEN

VA Teknik’s outlet weirs for surface water removal from rectangular clarifying tanks are made of stainless steel with Thompson v-notches.

ANDRITZ TurboJet - Weir Plates

by ANDRITZ Separation - a division of the Andritz Group     based in Waddinxveen, NETHERLANDS

ANDRITZ SEPARATION developed a next-generation weir plate - TurboJet - which drastically reduces a centrifuge’s absorbed power up to 30%. The patented TurboJet weir plate guides the liquid discharge from the centrifuge in the opposite direction to the bowl rotation. Adjustable nozzles form a jet similar to a jet engine’s exhaust. This ...

SkimOil - Model FWS - Floating Weir Skimmer

by SkimOil Inc.     based in Carrboro, NORTH CAROLINA (USA)

This is a simple floating well-proven oil skimmer that works with any pump that can pull suction. The unique FWS never needs manual adjustment. NEVER! The FWS skimmer is a surface skimmer. The FWS Floating Weir Skimmer is automatically self adjusting to your pump’s flow rate—meaning that by controlling your pump’s flow ...

Golden Harvest - Model GH 60 & GH-66 - Aluminum & Stainless Steel Weir Gates

by Golden Harvest, Inc.     based in Burlington, WASHINGTON (USA)

Golden Harvest Inc. Weir Gates are designed to control upstream water elevation and can provide a rough estimate of flow using notched gates via the downward- opening design. Weir gates function like slide gates, except that the disc opens downward allowing outflow to weir over the top of the gate.

Greyline - Model AVFM 5.0 - Area-Velocity Flow Monitor

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Monitor flow through open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Ideal for stormwater, combined effluent, raw sewage, irrigation water and streams. Calibration is simple: enter the pipe diameter or channel shape and the AVFM 5.0 computes the flow volume and displays the flow rate. Measure forward and ...

Model KD 34 - Adjustable Overflow Weir

by Danish Wastewater Equipment A/S     based in Vejle, DENMARK

The adjustable overflow weir model KD 34 is designed for controlling the inlet volume in inlet structures and distributor structures. It may also be used in outlet structures and in sand traps to control the water level and in grease traps to remove grease from the surface of the water. The adjustable overflow weir is placed between two side ...

Need help finding the right suppliers?

Let the XPRTs do the work for you