control gates Equipment in Italy

Served | Office inNear
76 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: control gates ×

  • Location: Europe ×

  • Location: Italy ×

EWT EliminatIR - Gate For The Carrousel Systems

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

The EWT EliminatIR gate by Ovivo is an evolution of the EWT denitIR gate for the Carrousel Systems. The EWT EliminatIR gate has been automated and now can be controlled to optimize the internal recycle entering into the anoxic zone. This allows for a more efficient denitrification process and for real-time control of the biological nutrient ...

Schenck - Burner Line Knife Gate Valves

by Schenck Process Norge AS     based in Sandnes, NORWAY

Stock has developed a Knife Gate Burner Line valve in accordance with the National Fire Protection Association (NFPA) standard 85. The standard requires burner line isolation at the pulverizer and at the burners to provide safety during the operation and maintenance of pulverized fue

Three-Side Sealing Sluice Gates

by FRIULANA COSTRUZIONI s.r.l.     based in VIGONOVO DI FONTANAFREDDA, ITALY

Manual three-side sealing sluice gate. The three-side sealing sluice gate with manual actuation has the function of intercepting and/or deviating a water flow in a channel or a basin. This operation is ensured by the opening or closing of a pad actuated manually by a handwheel. The sluice gate is fixed to the wall of the channels, usually made of ...

Specac - Low Temperature Golden Gate ATR

by Specac Limited     based in Orpington, UNITED KINGDOM

The Low Temperature Golden Gate ATR is a single reflection monolithic diamond ATR accessory for FTIR ATR analysis from -150°C to 80°C. The system uses a thermally insulated copper and stainless steel dewar in conjunction with an integral heater. The high thermal conductivity of the diamond crystal provides rapid temperature stabilisation, ...

ASTIM - Adjustable Over Flow Weirs

by ASTIM Manufacturing Inc.     based in Tavsanli Köyü, TURKEY

Adjustable over flow weirs are used for wide openings where the vertical travel required is not more than about 500 mm. The gate is hinged at the bottom, and is raised and lowered by means of a centrally mounted spindle which can be operated either manually, or by an actuator. As friction is very low, operating effort for tilting weirs is minimal.

Adjustable Weir

by SISMAT ULUSLARARASI LTD. STI.     based in KOCAELI, TURKEY

Adjustable weirs are mostly utilised for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open upwards.

Wey - Model Penstock / Sluice Gate 3 - Water Control Gate

by SISTAG AG     based in Eschenbach, SWITZERLAND

Design: Steel fabricated construction with fully guided gate, 3- or 4-sides tight Width Type: 700 - 4000 mm Actuation: alle type Material: 1.4406 (316L) Range of application: Water & Waste Water Treatment

Floating Bulkhead Gates

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab floating bulkheads are typically used for spillway openings where inaccessibility or size, prevent the use of a conventional bulkhead gate. The floating bulkhead consists of individual sections called caissons that are floated into place, pinned together then chambers in the caissons are filled with water as needed to lower the assembled ...

Roller Gates

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab roller gates are typically used where opening sizes are too large to efficiently use slide gates, or for applications where gravity closure is a requirement. The use of a wheeled gate results in significantly lower operating loads, thereby providing an effective means for emergency closure applications.

Tractor/Caterpillar Gates

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab designed and manufactured two new tractor/caterpillar gates for installation into the existing gate slots at the Buford Dam on Lake Lanier in Georgia. Each gate featured an integral jet flow gate designed to solve a long standing vibration problem during minimum flow releases.The tractor/caterpillar gates are supported along either side ...

Related Terms for control gates

Need help finding the right suppliers?

Let the XPRTs do the work for you