control gates Equipment in Slovakia

Served | Office inNear
63 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: control gates ×

  • Location: Europe ×

  • Location: Slovakia ×

Tractor/Caterpillar Gates

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab designed and manufactured two new tractor/caterpillar gates for installation into the existing gate slots at the Buford Dam on Lake Lanier in Georgia. Each gate featured an integral jet flow gate designed to solve a long standing vibration problem during minimum flow releases.The tractor/caterpillar gates are supported along either side ...

Floating Bulkhead Gates

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab floating bulkheads are typically used for spillway openings where inaccessibility or size, prevent the use of a conventional bulkhead gate. The floating bulkhead consists of individual sections called caissons that are floated into place, pinned together then chambers in the caissons are filled with water as needed to lower the assembled ...

Bulkhead Gates & Stop Logs

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab designed and manufactured three 14' x 15' bulkhead gates for the Lower Saranac Hydroelectric Project in Plattsburg, New York. Bulkhead Gates and Stop Logs are normally used to dewater for equipment maintenance in flood control dams and similar structures. Where Bulkhead Gates are supplied in one piece panels, Stop Logs are furnished in ...

Roller Gates

by Steel-Fab, Inc.     based in Fitchburg, MASSACHUSETTS (USA)

Steel-Fab roller gates are typically used where opening sizes are too large to efficiently use slide gates, or for applications where gravity closure is a requirement. The use of a wheeled gate results in significantly lower operating loads, thereby providing an effective means for emergency closure applications.

Gate/Knife

by TEMAK S.A.     based in Acharnes (Menidi) Attikis, GREECE

TEMAK can offer knife/gate valves, for use at waste water networks, or for water with high concentration of suspended solids, pulp or powders. Installation and piping connection is 'wafer' or 'lugged' type. The operation of the valve can be manual or automatic by means of pneumatic or electric actuator.

HydroBend - Weir Gates

by Steinhardt GmbH - Wassertechnik     based in Taunusstein, GERMANY

According to ATV A128 [Wastewater Technology Association], rainwater overflow basins and retaining canals are to be furnished with spillway dams. In the event of strong rainfall they divert excess water into the surrounding bodies of water. The upper edge of the spillway dam is the maximum storage level with which the chargeable storage volume is ...

Langemann - Gate

by Aqua Systems 2000 Inc.     based in Lethbridge, ALBERTA (CANADA)

Invented by Peter Langemann, the Langemann Gate was developed through a cooperative effort between St. Mary River Irrigation District, Peter Langemann and Aqua Systems 2000 Inc. (AS2I). The Langemann gate, used in conjunction with one of AS2I’s controllers, provides solutions to a host water of control problems. The patented design has gained ...

Model Series 642 - Control Gate Valve

by VAT Vacuumvalves AG     based in Haag, SWITZERLAND

For semiconductor, FPD and industrial processes, e. g. sputtering and etching systems.

Coplastix - Sluice/Slide/Weir Gates

by Ashbrook Simon-Hartley     based in Houston, TEXAS (USA)

All Coplastix sluice/slide/weir gates are built for dependable performance with special milled steel matrices that lend strength to the durable Coplastix doors. All contact faces are made from incompatible materials for minimum friction which contributes to manufacture a lighter gate that can be handled easier when manually operated and requires ...

Coplastix - Handstop/Stop Gate

by Ashbrook Simon-Hartley     based in Houston, TEXAS (USA)

Watertight handstop/stopgates from Ashbrook Simon-Hartley are designed for hand operated flow control channels. In a variety of sizes, only Coplastix material is employed. In gates 24' in width and larger, the Coplastix slide is contained and supported by a steel frame for additional rigidity. All gate contact faces are incompatible in order to ...

Related Terms for control gates

Need help finding the right suppliers?

Let the XPRTs do the work for you