cutthroat flume Equipment

3 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: cutthroat flume ×

Cutthroat Flumes

by Plasti-Fab, Inc.     based in Tualatin, OREGON (USA)

This flume is similar to the Parshall Flume except that the parallel throat section is removed and the bottom is at the same elevation as the channel invert through the length of the flume. Being a 'zero' throat flume the range of accuracy or useable depth for the Cutthroat Flumes is directly related to length of the flume. The Cutthroat Flume is ...

Cutthroat Flume

by Tracom Fiberglass Products     based in Alpharetta, GEORGIA (US) (USA)

Developed in the mid-1960's the Utah State University Water Research Laboratory, Cutthroat flumes are sized by throat width and overall length. A number of styles are commercially available. The most commonly used types are listed in the chart below. Note that it is not uncommon for intermediate (or even custom) sizes to be specified.

Cutthroat Flume

by Baski, Inc.     based in Denver, COLORADO (USA)

Cutthroat flumes are ideal for measuring water flow rates. Applications include: stream surveys, well pumping tests, irrigation studies, drainage surveys, seepage inspections, industrial outflows, sewage treatment plant flows, mine drainage, tail water runoff, and spring discharge. The name 'cutthroat' comes from the fact that there is no parallel ...

Related Terms for cutthroat flume

Need help finding the right suppliers?

Let the XPRTs do the work for you