effluent weir Equipment in United Kingdom

Serving United Kingdom | Office in United KingdomNear United Kingdom
31 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: effluent weir ×

  • Location: Europe ×

  • Location: United Kingdom ×

Weir Plates

by SIRIS Limted     based in Sunderland, UNITED KINGDOM

Thin plate weirs are used for liquid flow measurement where high accuracy is required, and are widely used for industrial discharge and final effluent outfall applications. All SIRIS type thin plate weirs are fabricated from Grade 316 stainless steel and machined with a laser. In addition the profile across the crest is as per BS/ISO.

Venturi Flumes

by SIRIS Limted     based in Sunderland, UNITED KINGDOM

Venturi Flumes are recommended for liquid flow measurement within open channels, particularly where suspended solids material is being transported, and are almost universally used in measuring the inflow to sewage treatment works.

KLa - Floating Effluent Decanters Systems

by KLa Systems, Inc.     based in Assonet, MASSACHUSETTS (USA)

KLa Systems floating Effluent Decanters are used to draw clarified liquid from near the liquid surface of sequencing batch reactors and aerobic digesters. The design is both simple and rugged, constructed of Type 304L stainless steel for the weir, draw-off pipe, swing joint support, and stop supports.

SaniTEE - Effluent Screening Device

by Bio-Microbics, Inc.     based in Shawnee, KANSAS (USA)

SaniTEE wastewater screens are now available in 4″, 8″ and 16″ sizes and provide consistent retention of wastewater solids for applications up to 20,000 gallons per day. Multiple SaniTEE screens can be used for flows above 20,000. SaniTEE Wastewater Screens SaniTEE self-cleaning wastewater deflection screens (commonly known as ...

Wedge Wire Screens

by Smart Storm Ltd     based in Halifax, UNITED KINGDOM

Wedge Wire Screens offer a high capacity, cost effective, highly efficient method of solids/liquid separation utilising stainless steel wire as the screening medium. Each unit is designed to suit the specific requirements of the customer and application to enable a highly effective solution for separation. Consisting of a basic outer casing, which ...

DAF - Water Treatment Systems

by WMEC Limited     based in Chichester, UNITED KINGDOM

It is a small and compact plant and the unit is extremely flexible in operation and can be set up to process waste water in a single pass or loop depending on the effluent characteristics and required air/solids ratios. Flocculants and coagulants can be automatically injected into the incoming effluent stream if required depending on application.

Greyline - Model AVMS 5.1 - Multi-Sensor Area-Velocity Flow Monitor

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Monitor flow through large open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Designed for municipal stormwater, stream flow, irrigation water, raw sewage, sluiceways, water intake channels, cooling water discharges and industrial effluent.

Carrousel ProSet - Clarifier For EffiCient Flocculation And Rapid Withdrawal Of Sludge

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

In the Carrousel BNR system, the stage is set for achieving tight effluent limits. The combination of the Carrousel system with the ProSet™ clarifier with its rapid sludge withdrawal capabilities allows for all of those nutrients that have been captured to be properly disposed of in the sludge handling areas of a plant.

EUROPELEC - Scraper Bridge

by EUROPELEC     based in Paris, FRANCE

The job of the EUROPELEC cantral drive thickener is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

EUROPELEC - Central Drive Thickener

by EUROPELEC     based in Paris, FRANCE

The job of the EUROPELEC CENTRAL DRIVE THICKENER is to thicken sludge from municipal or industrial wastewater treatment plants. It can be used in small or medium-sized installations. Effluent is channelled to the centre of the tank in the influent well where it is spread evenly and without turbulence over the thickening zone. The clean effluent is ...

Related Terms for effluent weir

Need help finding the right suppliers?

Let the XPRTs do the work for you