knife gates Equipment in Brunei Darussalam

33 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: knife gates ×

  • Location: Asia & Middle East ×

  • Location: Brunei Darussalam ×


Schenck - Burner Line Knife Gate Valves

by Schenck Process Norge AS

Stock has developed a Knife Gate Burner Line valve in accordance with the National Fire Protection Association (NFPA) standard 85. The standard requires burner line isolation at the pulverizer and at the burners to provide safety during the operation and maintenance of pulverized fue

Gate/Knife

by TEMAK S.A.

TEMAK can offer knife/gate valves, for use at waste water networks, or for water with high concentration of suspended solids, pulp or powders. Installation and piping connection is 'wafer' or 'lugged' type. The operation of the valve can be manual or automatic by means of pneumatic or electric actuator.

Knife gate valve

by TianJin Tanggu Huayang Valve Co., Ltd.

Technical:Size: DN50-DN400/DN50-DN2000Nominal Pressure: PN10/PN16Test PressureSealing: PN11/PN17.6Shell: PN15/PN24Working Temperature: -20°C~120°CSuitable Mediums: liquid, solid, gas

ABO - Series 300 - Knife Gate Valves

by ABO valve, s.r.o.

DN: 50 - 1200. PN: 10 (PN 16 upon request). Main characteristics: body and counter-body circular, total passage: enables a high flow capacity with low load loss, through gate: in its open position, there are no zones that limit the passage of the fluid (dead zones), double watertightness: packing and toric thread on both sides, interchangeable ...

E5700 Series - Knife Gate Valve

by Elite Valve Canada

The E5700 series has revolutionized the knife gate industries by offering features not found in standard valves. We start with our investment cast body, one of the first in industry to be offered in a knife gate design. The lost wax concept, allows features & strength to incorporate in the body, not previously found in standard knife gate ...

MONO Series - Knife Gate Valves

by PMP Precision Valve Co. Ltd.

The Mono knife gate valve, designed by Weco Armaturen Germany*,has a unique one piece bonneted body to reduce operating torque and eliminate potential leakage of odors to atmosphere.Manufactured by Jash Engineering the Mono series knife gate valve meets TAPPI - MSS- SP81, TIS-405-8 standards and compliant withnew AWWA-C 520-10 requirements.

Knife gate valve

by ShangHai QiuYi Valve Co.,Ltd

Knife Gate valve Product Sort:Gate valve>>Knife Gate valve Pressure:0.6MPa, 1.0MPa, 1.6MPa (150LB) Size:DN50~600 Design Std:API 6D Product Material:304,316,304L,316L,WCB, A105, Grey cast Iron page keywords:Knife gate valve, gate valve, Gate valves Knife Gate valve infomation:Model: PZ573H/F/X/Y-0.6/1.0/1.6 Gate valve, Knife gate valve Worm gea

Z53 - Lug Knife Gate Valve

by WenZhou Link Valve Co.,Ltd

Wafer type, Lug type, Flange type;Rising stem, Non-Rising stem,bi-directional,.Handwheel, Chainwheel, Lever, Bevel Gear, Pneumatic, Electric;Suitable for power plant, sewage treatment, slag discharge, food, papermaking, Medicine, Petroleum and chemical industry, water, steam piping, cutting or connecting media.

Red Valve - Series DX - Slurry Knife Gate Valves

by Red Valve Company

Red Valve's Series DX Slurry Knife Gate Valve is recognized as the most durable and user friendly knife valve designed for difficult slurry applications.When the valve opens, the Series DX reinforced elastomer sleeves seal against each other and provide a 100% full port opening, which minimizes turbulence, which in turn eliminates wear.  The ...

AVK - PN 10, CTC - Knife Gate Valve

by AVK International A/S

Variant: 702/10-003 - Knife gate valve with non-rising stem and handwheel,Cast iron. AVK lug/wafer knife gate valves are bi-directional with full and plain bore. The protected sealings and high quality materials bring about a great performance and a long service life. The valves can be re-tightened during service. AVK knife gate valves are ...

Need help finding the right suppliers?

Let the XPRTs do the work for you