knife gates Equipment in Saudi Arabia

Serving Saudi Arabia | Office in Saudi ArabiaNear Saudi Arabia
44 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: knife gates ×

  • Location: Asia & Middle East ×

  • Location: Saudi Arabia ×

AVK - Model PN 10, CTC - Knife Gate Valve

by AVK International A/S     based in Galten, DENMARK

Variant: 702/10-003 - Knife gate valve with non-rising stem and handwheel,Cast iron. AVK lug/wafer knife gate valves are bi-directional with full and plain bore. The protected sealings and high quality materials bring about a great performance and a long service life. The valves can be re-tightened during service. AVK knife gate valves are ...

Schenck Stock - Burner Line Knife Gate Valves

by Schenck Process Norge AS     based in Sandnes, NORWAY

Stock has developed a Knife Gate Burner Line valve in accordance with the National Fire Protection Association (NFPA) standard 85. The standard requires burner line isolation at the pulverizer and at the burners to provide safety during the operation and maintenance of pulverized fue

Model MONO Series - Knife Gate Valves

by PMP Precision Valve Co. Ltd.     based in St. Laurent, QUEBEC (CANADA)

The Mono knife gate valve, designed by Weco Armaturen Germany*,has a unique one piece bonneted body to reduce operating torque and eliminate potential leakage of odors to atmosphere.Manufactured by Jash Engineering the Mono series knife gate valve meets TAPPI - MSS- SP81, TIS-405-8 standards and compliant withnew AWWA-C 520-10 requirements.

Model MG (general) - Knife Gate Valves

by SISTAG AG     based in Eschenbach, SWITZERLAND

Design: Monotype.Size: 50 - 600 mm.Material: Cast Iron & Stainless steel.Flange drilling: DIN PN 16/10.Pressure rating: max. 16 bar.Range of application: Off-shore, Pulp & Paper,Coal Fired Power Station

ABO - Model Series 300 - Knife Gate Valves

by ABO valve, s.r.o.     based in Olomouc, CZECH REPUBLIC

DN: 50 - 1200. PN: 10 (PN 16 upon request). Main characteristics: body and counter-body circular, total passage: enables a high flow capacity with low load loss, through gate: in its open position, there are no zones that limit the passage of the fluid (dead zones), double watertightness: packing and toric thread on both sides, interchangeable ...

Model E5700 Series - Knife Gate Valve

by Elite Valve Canada     based in Brantford, ONTARIO (CANADA)

The E5700 series has revolutionized the knife gate industries by offering features not found in standard valves. We start with our investment cast body, one of the first in industry to be offered in a knife gate design. The lost wax concept, allows features & strength to incorporate in the body, not previously found in standard knife gate ...

TECOFI - Model VG3400-00 - Knife Gate Valve With Handwheel

by TECOFI     based in Saint Priest, FRANCE

Body material: Cast Iron GG25. Obturator material: Stainless steel. Construction PN: 10. Tightness type: Nitril. Ends: Between flanges PN 10. Working Pressure: 4 to 10 bar. Max. Temp: + 80°C. Mini Temp: -10°C.

Red Valve - Model Series DX - Slurry Knife Gate Valves

by Red Valve Company     based in Carnegie, PENNSYLVANIA (USA)

Red Valve's Series DX Slurry Knife Gate Valve is recognized as the most durable and user friendly knife valve designed for difficult slurry applications.When the valve opens, the Series DX reinforced elastomer sleeves seal against each other and provide a 100% full port opening, which minimizes turbulence, which in turn eliminates wear.  The ...

Model RF-SKG - Wafer Knife Gate Valves

by RF Valves, Inc     based in Hanover, MARYLAND (USA)

Wafer Knife Gate Valves For knife gate valves that perform in the most challenging conditions, trust in RF VALVES

Model RF-SKG - Flanged Knife Gate Valves

by RF Valves, Inc     based in Hanover, MARYLAND (USA)

Flanged Knife Gate Valves For knife gate valves that perform in the most challenging conditions, trust in RF VALVES.

Need help finding the right suppliers?

Let the XPRTs do the work for you