weir plates Equipment

115 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: weir plates ×

Outlet Weirs

by VA Teknik i Borås AB

VA Tekniks outlet weirs are made in stainless steel AISI304 or AIAI316. The water pours out through triangularly shaped holes dimensioned for actual flow and water level. The closed end of the weir hangs in a height adjustable cradle. The flow trough end is fixed to the tank wall with an adjustable wall plate with oval holes.

Weir and Scum Baffle Systems

by NEFCO, Inc.

Weirs and scum baffles are the ever-present nuts and bolts of the treatment plant, where the versatility and durability of fiberglass makes it the material of choice for this equipment.

Stevens - Figure Plates for Staff Gages

by Stevens Water Monitoring Systems, Inc.

Made with the same durable porcelain enamel finish as our staff gages, our numbered plates are available for custom level marking. Plates come in three sizes: 2” x 3”, 3” x 4” and 4' x 6'.

SuperSettler - Lamella Plate Clarifier

by WesTech Engineering, Inc.

The efficient design of the SuperSettler™ Lamella Plate Clarifier utilizes lamella plates and shallow depth sedimentation to minimize the clarifier footprint. Pioneered by Nordic Water Products, the SuperSettler is available in both inclined plate packs and stand-alone settler units.

Weir Plates

by Siris Environmental Limited

When monitoring low flow volumes, and the liquid being monitored is relatively free of solids then it may be beneficial to use a V Notch or Rectangular notch weir plate. This type of open channel system can be more accurate than a flume for monitoring flows at very low levels can, on occasion be incorporated into existing final outfall chambers ...

Weirs

by JC-Fabrications, LLC

Weirs are the workhorse of any treatment plant.  By definition, they control the overflow rate of water through the hydraulic profile.  JC-Fabrications can provide weirs to meet almost any specification, from V-notch weirs to sharp-crested and flat top weirs, in standard 12' lengths or custom lengths up to 20'.  Our weirs are ...

HQI - Inclined Plate Clarifiers

by Hydro Quip, Inc. (HQI)

The Hydro Quip Inclined Plate Separators are designed and manufactured to provide for the precipitation and removal of suspended material in water. The Inclined Plate Separator employs the use of a series of plates inclined at an angle of 55°. This specialized design allows the Inclined Plate Separator to perform all of the functions of a ...

Weir Plates & Scum Baffles

by Warminster Fiberglass Company

Warminster Fiberglass manufactures weir plates, scum baffle plates, lap plates, cover plates and scum baffle support brackets of the highest quality. They are made of fiberglass reinforced polyester resin, matched-die molded to produce smooth, resin rich surfaces, free of voids, porosity, exposed glass, cracks and crazes. All edges are sealed in ...

HQI - Chemical/Physical Inclined Plate Clarifier

by Hydro Quip, Inc. (HQI)

The Hydro Quip Continuous Flow Chemical/Physical Inclined Plate Clarifiers are designed to separate mechanical and chemical emulsions and colloidal contaminants from the wastewater. The use of polymers or other chemical assistant will help precipitate the contaminants to the hopper compartment for removal.

WACO - Weir Gates

by WACO Products, Inc.

For control of flow through a port opening and to balance flow through parallel systems, the WACO weir gate is the answer. The weir gate opens by lowering its slide plate, allowing water to cascade over the top edge. By adjusting the height of the slide plate, the water level upstream can be controlled. WACO weir gates feature handwheel or ...

Need help finding the right suppliers?

Let the XPRTs do the work for you