weir plates Equipment in Yukon

Serving Yukon | Near Yukon
13 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: weir plates ×

  • Location: Canada ×

  • Location: Yukon ×

ANDRITZ TurboJet - Weir Plates

by ANDRITZ Separation - a division of the Andritz Group     based in Waddinxveen, NETHERLANDS

ANDRITZ SEPARATION developed a next-generation weir plate - TurboJet - which drastically reduces a centrifuge’s absorbed power up to 30%. The patented TurboJet weir plate guides the liquid discharge from the centrifuge in the opposite direction to the bowl rotation. Adjustable nozzles form a jet similar to a jet engine’s exhaust. This ...

VA Teknik - Outlet Weirs

by VA Teknik i Borås AB     based in Borås, SWEDEN

VA Tekniks outlet weirs are made in stainless steel AISI304 or AIAI316. The water pours out through triangularly shaped holes dimensioned for actual flow and water level. The closed end of the weir hangs in a height adjustable cradle. The flow trough end is fixed to the tank wall with an adjustable wall plate with oval holes.

Weirs

by JC-Fabrications, LLC     based in Boca Raton, FLORIDA (USA)

Weirs are the workhorse of any treatment plant.  By definition, they control the overflow rate of water through the hydraulic profile.  JC-Fabrications can provide weirs to meet almost any specification, from V-notch weirs to sharp-crested and flat top weirs, in standard 12' lengths or custom lengths up to 20'.  Our weirs are ...

Weir Gates - Series 40

by Fontaine Industries Ltd     based in Magog,, QUEBEC (CANADA)

The Fontaine SERIES 40 Downward Opening Weir Gate is used for flow control in various applications where water flows over the slide. The sealing system using UHMWPE is the same as for the SERIES 20 Sluice Gate.

WACO - Weir Gates

by WACO Products, Inc.     based in Baltimore, MARYLAND (USA)

For control of flow through a port opening and to balance flow through parallel systems, the WACO weir gate is the answer. The weir gate opens by lowering its slide plate, allowing water to cascade over the top edge. By adjusting the height of the slide plate, the water level upstream can be controlled. WACO weir gates feature handwheel or ...

Segmental Weir Machine

by HST Systemtechnik     based in Meschede, GERMANY

Segmental weirs are used anywhere where more precise regulation of the water volume is required due to high back pressure. Due to the stress capacity principle, they can be operated with low torque and thus lower drive power. To be more economically, the frame-bar construction of the segmental weirs are fitted with a projecting baffle plate, with ...

PCL - Weiir Plates & Bafflles

by Protectolite Inc.     based in Toronto, ONTARIO (CANADA)

PCL Composites manufactures weir plates and scum baffles, specialty baffles and related accessories of fiberglass reinforced polyester (FRP) composites. The inherent properties of FRP weirs and baffles make them ideal for use in water and wastewaterapplications.

Golden Harvest - Model GH 60 & GH-66 - Aluminum & Stainless Steel Weir Gates

by Golden Harvest, Inc.     based in Burlington, WASHINGTON (USA)

Golden Harvest Inc. Weir Gates are designed to control upstream water elevation and can provide a rough estimate of flow using notched gates via the downward- opening design. Weir gates function like slide gates, except that the disc opens downward allowing outflow to weir over the top of the gate.

ANDRITZ - Model D-Type - Large Decanter Power Savings

by ANDRITZ Separation - a division of the Andritz Group     based in Waddinxveen, NETHERLANDS

New design features for Andritz Separation D-type decanters enable significant - up to 40% - reduction of total power consumption while maintaining throughput and efficiency. With power costs rising, this level of power savings translates into a very fast return on investment. The power-saving features are available on new D5 to D10 decanters. The ...

CPI-Corrugated Plate Interceptor Unit

by Hudson Industries     based in Warren, OHIO (USA)

For treatment of process, run-off, ballast/bilge, and oily water. Flow rates from 25-8000 gpm. Capable of handling 100% oil slugs on limited basis. Carbon Steel/SS Construction. Corrugated plate of PVC,CPVC,PE,SS. Pump skids available. Can be designed with heaters for extreme cold. Equipped with slotted pipe, adjustable weirs or API rotary ...

Related Terms for weir plates

Need help finding the right suppliers?

Let the XPRTs do the work for you