weir plates Equipment in United Kingdom

16 Results found
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • Keyword: weir plates ×

  • Location: Europe ×

  • Location: United Kingdom ×

ANDRITZ TurboJet - Weir Plates

by ANDRITZ Separation - a division of the Andritz Group

ANDRITZ SEPARATION developed a next-generation weir plate - TurboJet - which drastically reduces a centrifuge’s absorbed power up to 30%. The patented TurboJet weir plate guides the liquid discharge from the centrifuge in the opposite direction to the bowl rotation. Adjustable nozzles form a jet similar to a jet engine’s exhaust. This ...

Weir Plates

by Siris Environmental Limited

When monitoring low flow volumes, and the liquid being monitored is relatively free of solids then it may be beneficial to use a V Notch or Rectangular notch weir plate. This type of open channel system can be more accurate than a flume for monitoring flows at very low levels can, on occasion be incorporated into existing final outfall chambers ...

Weirs

by JC-Fabrications, LLC

Weirs are the workhorse of any treatment plant.  By definition, they control the overflow rate of water through the hydraulic profile.  JC-Fabrications can provide weirs to meet almost any specification, from V-notch weirs to sharp-crested and flat top weirs, in standard 12' lengths or custom lengths up to 20'.  Our weirs are ...

Outlet Weirs

by VA Teknik i Borås AB

VA Tekniks outlet weirs are made in stainless steel AISI304 or AIAI316. The water pours out through triangularly shaped holes dimensioned for actual flow and water level. The closed end of the weir hangs in a height adjustable cradle. The flow trough end is fixed to the tank wall with an adjustable wall plate with oval holes.

WACO - Weir Gates

by WACO Products, Inc.

For control of flow through a port opening and to balance flow through parallel systems, the WACO weir gate is the answer. The weir gate opens by lowering its slide plate, allowing water to cascade over the top edge. By adjusting the height of the slide plate, the water level upstream can be controlled. WACO weir gates feature handwheel or ...

Weir Penstocks

by Aquatic Control Engineering Ltd.

The range of weir penstocks we offer is always designed and manufactured bespoke, suitable for specific tasks or requirements. We also have a wide range of pre-designed weir penstock sizes along with our bespoke services which allow us to offer a tailored solution based on each individual client requirement. Each specific type we offer across the ...

Model KD 34 - Adjustable Overflow Weir

by Danish Wastewater Equipment A/S

The adjustable overflow weir model KD 34 is designed for controlling the inlet volume in inlet structures and distributor structures. It may also be used in outlet structures and in sand traps to control the water level and in grease traps to remove grease from the surface of the water. The adjustable overflow weir is placed between two side ...

Interchange Flow Measurment Tank

by Siris Environmental Limited

To help Industrial users meet the requirements for MCERTS Siris Environmental have developed a Flow Measurement Tank which encapsulates a range of flow rates within the scope of BS ISO 1438.  Using an Interchangeable Plate the tank can be set to accurately measure flows up-to a given maximum.  In the event of any future increase or de

Weir Gates - Series 40

by Fontaine Industries Ltd

The Fontaine SERIES 40 Downward Opening Weir Gate is used for flow control in various applications where water flows over the slide. The sealing system using UHMWPE is the same as for the SERIES 20 Sluice Gate.

Channel Weir Penstock Edition

by penstocks.de

Usable for installation in channels and outlets. Suitable for throttling and regulating purposes. Sealing on 3- faces. For on- and off- seating pressure. Low operation forces.

Related Terms for weir plates

Need help finding the right suppliers?

Let the XPRTs do the work for you