Weirs, Sluices, Flumes, Gates Equipment in India

20 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Weirs, Sluices, Flumes, Gates ×

  • In: Asia & Middle East ×

  • In: India ×

Water discharge Measurements: RBC Flumes

by Eijkelkamp Soil & Water     Distributor in INDIA

RBC flumes are used to measure the quantity of water that, for instance, flows through an irrigation channel. By comparison to known flumes, such as the WSC-and the Parshall flume, the RBC flume is the most accurate. The RBC flume has been specially designed for use in smaller water ways or earthen channels (irrigation channels, in- outlets, ...

Model U Series - Wafer Type Knife Gate Valve

by V-Tork Controls     based in Coimbatore, INDIA

Knife Gate Valves are specifically designed and manufactured according to MSS SP81 to meet the worst working conditions in Pulp & Paper, Mining & Steel, Power & Chemical Industries to handle Semi-Solids, Dry-Ash, Chips, Fiber contents Pulps etc. The compact design of the Valves facilitate light weight, minimum space for installing, ...

Model U Series - Lug Type Knife Gate Valve

by V-Tork Controls     based in Coimbatore, INDIA

Solid Single piece cast body. Uni Directional Lug Type. Metal Seated and Soft seated. Designed as per MSS SP 81. These valves are used to handle very dense mixtures of stock and slurries.The shearing action of the knife gate cuts through solids and cleans the seat as it closes. Smooth flow and non clogging full port design. In the area of high ...

Model MS-Series - Slugate Slurry Knife Gate Valve

by V-Tork Controls     based in Coimbatore, INDIA

Solid Single piece cast body small size valves from 2' to 16'. Designed as per V-TORK Standard. Sealing with metal reinforced Elastomer seat gives 100% leak proof and gives extra protection to the body of the valve by protecting from any foreign materials present in the flow medium . Our (Bi-Pack) sealing concept gives extra life to the valves and ...

Model B Series - Bi-Directional Lug Type , Soft Seated Knife Gate Valves

by V-Tork Controls     based in Coimbatore, INDIA

Solid Single piece cast body. Designed as per MSS SP 81. Sealing with Rubber material in the interior center part of the body inside the cavity opening gives 100% leak proof. Smooth flow and non clogging full port design. The valve can be mounted in both pressure direction. For throttling and metering application we provide V-PORT fixtures also. ...

Enviropol - Ash Sluicing System

by Enviropol Engineers Pvt.Ltd.     based in NOIDA, INDIA

The entire fly ash from the boiler is most economically handled for disposal in cake form through state of the art design of ash sluicing system available with Enviropol. The fly ash is converted in to slurry through swing seal arrangement and processed for solid-liquid separation through mechanized slurry de-watering system. The ash is disposed ...

Model 8020 GS3 - Sliding Gate Control Valve

by Schubert & Salzer Control Systems GmbH     Office in Khar (W), INDIA

This control valve is used in a wide range of process engineering control tasks. Most media such as steam, fluids, gases, etc. can be excellently controlled with it.

Model 8020 GS1 - Sliding Gate Control Valve

by Schubert & Salzer Control Systems GmbH     Office in Khar (W), INDIA

This control valve is used in a wide range of process engineering control tasks. Most media such as steam, fluids, gases, etc. can be excellently controlled with it.

GMW - Stop Log Gates

by General Mechanical Works Pvt. Ltd.     based in Vadodara, INDIA

Bulkhead Gates and Stop Logs are normally used to isolate equipments such as pumps, screens and service gates for maintenance. Where Bulkhead Gates are supplied in one piece panels, Stop Logs are furnished in multiple sections for ease of handling and installation these can be used in multiple locations (slots) and can be removed completely for ...

Sedifloat - Dissolved Air Floatation

by Krofta Engineering Limited     based in New Delhi, INDIA

The untreated effluent (1) is fed by gravity or pump to the center distributor (2) where it mixes with the air released from the recycled air carrier water and then enters the tank. Fine air bubbles lift the suspended, flocculated solids to the water surface (3) Heavier particles settle rapidly to the tank floor (4). The zone of clear water formed ...

Need help finding the right suppliers?

Let the XPRTs do the work for you