Only show results in Virginia? Ok

Acid Gas Applications

  • Premium

    Mass transfer and chemical separations applications for natural gas, chemical and pharmaceutical plants

    De-ethanizer. De-propanizer. De-butanizer. Acid Gas Capture. Air Separation. Chlor Alkali Plants. Ammonia Plants. Fertilizer Plants. Ethylene Oxide Production. Styrene and Ethylbenzene Production. Ethanol Separation. Methanol Separation. LNG Recondenser. Titanium Dioxide Production.

    By Raschig USA Inc. based in Arlington, TEXAS (USA).

  • Premium

    DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN DIESEL FUEL OR DOMESTIC HEATING FUEL BY MID-IR SPECTROSCOPY

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical solution for EN 14078:2014 implementation using FTIR spectrometer InfraLUM FT-08 and powerful SpectraLUM software package. The method is based on measuring the transmission spectra of a sample of diesel fuel in the mid-IR spectral range. Consequent calculation of the FAME concentration is performed by InfraLUM software automatically by comparison of peak height against a calibration curve.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Anaerobic water purification systems for sulphate removal/recovery

    Sulphate is a common chemical in industry.

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Continuous emissions monitoring for sulphuric acid production plants

    The process control of a sulphuric acid plant needs good and reliable detection of gas phase sulphur dioxide (SO2). To measure SO2 is a challenge due to the corrosive environment and high concentration of SO2. Several places in the process needs to be monitored and to transport the sample gas is difficult. A large dynamic range is needed as the SO2 concentration can vary between 15% volume and a few mg/m3. Most systems installed need a lot of maintenance, sometimes as often as every day.

    By Opsis AB based in Furulund, SWEDEN.

  • Acid Eddy Chemical Dilution Trough

    By Global Treat, Inc based in Spring, TEXAS (USA).

  • High-calcium lime slurry for mining industry

    Multiple applications, from acid neutralization of mine waste and process control for mineral separation, to off gas desulphurization, lime is often considered the “life blood” of the mining industry.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Acid Eddy Chemical Dilution Trough

    By Global Treat, Inc based in Spring, TEXAS (USA).

  • Filtration plants for solid-liquid separation and dewatering of treated effluents for chemical/pharmaceutical industry

    Bilfinger Water Technologies produces and installs filtration plants in chemical – pharmaceutical fields since the early 1970s. The filtration systems developed by Bilfinger Water Technologies during this 30 year-experience are particularly appreciated in solid liquid separation processes and dewatering of treating effluents. These separation processes play a very important role in the chemical pharmaceutical field, being essential elements of many production processes.

    By Aqseptence Group GmbH based in Aarbergen, GERMANY.

  • Applications and Air Pollutants Removed for Marine Power Plants

    Control of ship diesel engine emissions to meet MARPOL requirements for particulate ash and soot, sulfur dioxide and NOx. Special compact inline stack mounted space saving designs. Both open loop arrangements using sea water or closed loop using a range of chemical solutions.  Complete system offerings.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Caustic, Sulfuric Acid & Bleach Double Wall Containment Tanks for On-site Processing

    Our safe tank vessels are independently designed for each project and to the requirements required by th engineer. Chemicals we design HDLPE & XLPE (HDXLPE) vessels for include: Acetic Acid, Aluminum Sulfate, Ammonium Sulfate, Calcium Chloride, Ethylene Glycol, Ferric Chloride, Ferric Sulfate, Ferrous Sulfate, Hydrochloric Acid, Hydrofluoric Acid, Hydrofluosilicic Acid, Hydrogen Peroxide, Magnesium Chloride, Phosphoric Acid, Polymers (Deposition), Potassium Hydroxide, Sodium Hypochlorite, Sulfuric Acid, Surfactants & water.

    By Sierra Sales Double Wall Plastic Tanks based in Perkasie, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you