Only show results available in Connecticut? Ok

activated carbon injection (Activated Carbon Treatment) equipment

  • Nol-Tec - Activated Carbon Injection

    Powdered activated carbon is the mercury abatement sorbent proven to be most effective. However, what makes it so effective also makes it the most challenging to handle. The ultra-fine, flowable characteristics of powdered activated carbon increase mercury removal – but standard eductor technology does not work well with this material. Low ...

    By Nol-Tec Systems, Inc. based in Lino Lakes, MINNESOTA (USA).

  • Dustex - Model ACI - Activated Carbon Injection System

    An Activated Carbon Injection (ACI) System is an engineered system from which powdered activated carbon (PAC) is pneumatically injected from a storage silo into the flue gas ductwork. The PAC adsorbs the mercury from the flue gas and is then collected with the fly ash in the plant’s particulate collection device. ACI is the most established ...

    By Dustex Corporation based in Kennesaw, GEORGIA (US) (USA).

  • ADA - Activated Carbon Injection System for Mercury Control

    Activated  Carbon Injection is the most established commercial technology for reducing mercury emissions from coal-fired boiler flue gases.  It is a system in which Powdered Activated Carbon (PAC) is pneumatically injected from a storage silo into the flue gas ductwork where it then adsorbs mercury and is collected along with fly ash in ...

    By ADA Environmental Solutions ((ADA-ES) based in Highlands Ranch, COLORADO (USA).

  • Model 767 Type - Active Carbon for Injection

    Adsorbing force of methylthionine chloride ml :≥11. Adsorbing force of quinine sulfate mg/g :≥120. PH :4.5-7.5. Chloride :≤% 0.10. Sulkfate :≤% 0.05. Zinc salt :≤% 0.005. Total Fe :≤% 0.02. Heavy metal :≤% 0.003. Soluble matter in acid :≤% 0.8. Residue on ignition :≤% 2.5. Loss on dry :≤% 10. Sulphide :No color ...

    By Hangzhou Hengxing Activated Carbon Co,Ltd based in Hangzhou, CHINA. from Hengxing Activated Carbon Product line

  • Model 732 Type - Active Carbon for Injection

    Adsorbing force of methylthionine chloride ml : >11. Adsorbing force of quinine sulfate mg/g : >120. PH : 4.5-7.5. Chloride Less-than% : 0.10. Sulfate Less-than% : 0.05. Zinc salts Less-than% : 0.005. Total Fe Less-than% : 0.02. Heavy metal Less-than% : 0.003. Soluble matter in acid Less-than% : 0.8. Residue Less-than% : 2.5. Sulfide : No ...

    By Hangzhou Hengxing Activated Carbon Co,Ltd based in Hangzhou, CHINA. from Hengxing Activated Carbon Product line

  • SEI - Model ACI and DSI - Activated Carbon Injection and Dry Sorbent Injection System

    Activated Carbon Injection (ACI) Systems and Dry Sorbent Injection (DSI) Systems have been in use for many decades and SEI has been supplying such systems in the industrial markets for 20 years.  The use of these systems for Mercury and Acid Gas control has a low capital cost and proven reliability. SEI’s experience is eclectic with ...

    By Southern Environmental Inc. based in Pensacola, FLORIDA (USA).

  • Powdered Activated Carbon

    Powdered Activated Carbon (PAC) injection is widely used method to control heavy metals and dioxins emissions. The porous structure of carbon makes it an ideal solution for absorption and it can be injected directly into the flue gas stream or laid in beds for the flue gas to pass through. The injection temperatures, feed rate, material porosity ...

    By Addfield Environmental Systems Ltd. based in Staffordshire, UNITED KINGDOM. from Filtration Product line

  • Wood Based Activated Carbon

    Powder activated carbon produced by steam activation of wood. This wood based activated carbon has high porosity and purity. Majority is being used in the water and wastewater treatment, decolorization and vapor phase injection systems.

    By Ecologix Environmental Systems, LLC based in Alpharetta, GEORGIA (US) (USA). from Activated Carbon New Product line

  • Activated Carbon Filter

    Activated carbon filters are very similar to multi media filters and other pressure filters in construction and operation. The purpose of an activated  carbon filter is to remove free chlorine, an oxidizing agent that will damage most resins and/or membranes in a water treatment system. A chemical injection system using ...

    By Enki Water Treatment Technologies Ltd based in Basaksehir, TURKEY.

  • FastPAC Premium - Powdered Activated Carbons

    FastPAC Premium® is a patent-pending, next-generation halogenated powdered activated carbon that is designed to rapidly and efficiently remove mercury from the flue gas of power plants and other coal-fired facilities, particularly in systems that require effective oxidation of mercury. This brominated carbon is produced from coal and lignite ...

    By ADA Carbon Solutions, LLC based in Littleton, COLORADO (USA).

  • FastPAC - Powdered Activated Carbons

    FastPAC™ is a patent-pending, next-generation powdered activated carbon that is designed to rapidly and efficiently remove mercury from the flue gas of power plants and other coal-fired facilities, particularly in systems that have pre-oxidized mercury. This non- brominated carbon is produced from coal and lignite feedstock’s that have ...

    By ADA Carbon Solutions, LLC based in Littleton, COLORADO (USA).

  • Semi-Coke Used in Activated Carbon

    Our semi-coke can be used in the production of activated carbon, carbon disulfide, coal injection and other products.

    By Xinjiang MJ Coal Chemical Co.,Ltd. based in Xinjiang, CHINA.

  • Activated Air Units

    By means of a high-voltage applied to an ultra-violet light generating, catalytic wire mesh, molecules in ambient air are split and energised, converting the moisture and air into a flow consisting of a mixture of unstable atoms, ions and radicals, with elevated electron activity levels. These Activated Air molecules may then be injected into a ...

    By Organics Group plc based in Coventry, UNITED KINGDOM. from Process Systems Product line

  • Cleeve - Carbon / Lime Injection System

    The problem of controlling acid gases and the removal of gaseous heavy metals and dioxins from emissions are typical in flue gas cleaning. The problem is overcome with introduction of Powder Activated Carbon (PAC) and Hydrated Lime into the system. Benefiting from over 40 years experience in the industry, Cleeve relies on expertise in the storage ...

    By Cleeve Materials Handling Limited based in Gloucestershire, UNITED KINGDOM.

  • Dry Scrubbing

    In 'dry scrubbing' a solid sorbent is injected into the gas stream which reacts with the contaminant and is removed on a filter, together with any other particulates. This produces a dry powder for disposal. Alkalis such as lime or sodium bicarbonate are injected for the removal of acid gases such as sulphur dioxide and hydrogen chloride. Powdered ...

    By ACWA Services Ltd based in Skipton, UNITED KINGDOM. from Air Product line

  • SORBMIX - DSI, FSI & ACI Sorbent Injection System

    SORBMIX is an advanced injection system that can be installed in combination with traditional in-duct (DSI), in-furnace (FSI) and activated carbon (ACI) injection systems for SO2, SO3, HCl and Hg control. Unlike traditional DSI, FSI and ACI systems, SORBMIX utilizes an advanced 'no lance' sorbent injection system that enhances ...

    By MOBOTEC based in Naperville, ILLINOIS (USA).

  • Wastewater

    Pumping Sodium hypochlorite for disinfection and caustic and cyanide removal. Lime slurries for pH control (corrosion control) and coagulation. Ferric chloride and alum injection for coagulation. Copper sulfate injection for algae control. Pumping of activated carbon or diatomaceous earth slurries for odor and color control. Pumping of caustic ...

    By Aquflow based in Irvine, CALIFORNIA (USA). from Applications Product line

  • Water Treatement

    Injecting Sodium hypochlorite and Calcium hypochlorite for disinfection. Injection of sulfuric acid and sodium silicate. Pumping of alum or sodium aluminate as a coagulant aid. Pumping Slurries for filtration. Silica-sol for coagulation of high organic waters. Injection of phosphate for red water control. Lime slurries in softening and pH control. ...

    By Aquflow based in Irvine, CALIFORNIA (USA). from Applications Product line

  • Water Filter

    Sand filtration is one of the oldest water treatment technologies known. If properly designed, constructed, operated and maintained, a sand filter produces a very high quality effluent. The incoming raw water is injected into and spread through the sand bed. On filtration up to through the sand bed, solid impurities are filtered off from the water ...

    By Mojan Engineering Co. based in Tehran, IRAN.

  • D.King - Activated Carbon Air Filter Element Hepa Air Filter Cartridge

    Material: activated carbon; Structure: End cover plus skeleton and filter layer; Application: industry. include: pure water, electroplating line, printed circuit board, coating, solvents, detergent, medicine water, oral liquid, pharmaceutical injection, beverage, wine .etc; Function: It can effective move organic matter in liquid , particulate , ...

    By Xinxiang D. King Industry Co. Ltd. based in Xinxiang City, CHINA. from Air Conditioning Appliances Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you