Aerosol Monitoring Equipment For Air And Climate Available In Marshall Islands
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The flexible system with ultimate sensitivity and targeted performance optimization using various accessories for advanced research: Ultimate freedom of optimization through full ion focus control. Shortest dwell time and best mass separation. Flexible connection of accessories using two entry ports to the plasma compartment. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The robust system for efficient and stable characterization of high matrix samples: Outstanding plasma robustness for high matrices. Minimized drift at changing matrix load. Efficient interference management with outstanding ease of use. ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The fast system for high-throughput analysis and superior precision for large sample batches: High sensitivity for optimized data acquisition. Universal interference management mode 11 orders dynamic range for full coverage of required concentration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
N1312 is intended for use as ELPI®+ spare impactor only. For existing users, please inform the serial number of the ELPI+ together with the purchase ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The high sensitivity instrument for routine ultratrace element detection in clean sample matrices: Ultra sensitive and stable performance for best signal-to-noise ratio. High ion transmission with full sensitivity control on complete mass range. Market leading abundance ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
ELPI+ unit with impactor and charger unit, 2 m of sample hose (IPR-212), vacuum hose (IA-322B), aluminium foils (CF-300), greased aluminium foils (CFG- 225), Apiezon-L grease (AG-10), substrate positioning tool (N1591), spare charger needle (N1281), RS-232 cable with USB adapter, connectors, power supply with mains cable, user manuals and calibration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eFilter™ including one filter cassette and one real-time detection module installed in the device, eFilter charger with cable connection, USB-micro-USB cable for laptop connection, micro-SD memory card, calibration certificate and USB drive including eFilter user manual and virtual COM port ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Used for charging and calibrating secondary flow for the real-time measurement ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Exhaust hose for DEED-300, 1 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Incl. pressure regulator and gauge, particle filters to remove solid and oil particles from the dilution air and a silica gel dryer or molecular sieve for water removal. Extra molecular sieve 1 kg for ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati Oxidation Flow Reactor, DOFR, is a unique, all-in-one solution combining sample conditioning and an oxidation flow reactor for secondary aerosol (SA) formation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you