Aerosol Collection (Aerosol Monitoring) Equipment Available In Australasia
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples ...
-
Manufactured by Smiths Detection Inc.based in USA
The BioFlash Biological Identifier is a bio-aerosol collection and identification system. It uses CANARY technology along with proprietary aerosol collection techniques to provide a low-risk, cost-effective biological sampling and identification solution for environmental monitoring. The BioFlash Biological Identifier provides ...
-
Manufactured by CBRN International Ltd.based in UNITED ARAB EMIRATES
The SASS® 2400 LV air sampler is our smallest wetted-wall aerosol particle collection system. It is designed to operate with a much lower air flow and fluid sample volume than the SASS 2300, while still employing the highly successful wetted wall aerosol collection strategy that has received U.S. Department of Homeland ...
-
Manufactured by In-Tox Products, LLCbased in USA
The Air Sampling Liquid Impinger is an instrument used to collect aerosol particles. Aerosol particles are sampled at a known, constant flow rate into a known volume of liquid. Solid particles are counted to determine aerosol concentration. Concentration of liquid or dissolved particles can be determined by chemical ...
-
Manufactured by CBRN International Ltd.based in UNITED ARAB EMIRATES
The SASS® 4100 (patent pending) is a highly efficient, two-stage filter-based aerosol collection device. It is the highest-capacity portable aerosol dry collector in production. Many applications require the collection and analysis of aerosol particles, ranging from environmental air sampling and ...
-
Manufactured by Research International, Inc.based in USA
two-stage filter-based aerosol collection device. Many applications require the collection and analysis of aerosol particles, ranging from environmental air sampling and counter-terrorism to epidemiology, medicine, and agriculture. These applications typically involve the monitoring or collection of airborne ...
-
Manufactured by Sunset Laboratory Inc.based in USA
The Lab OC-EC Aerosol Analyzer is the industry standard for environmental and workplace monitoring. This instrument uses a proven thermal-optical method to analyze for OC-EC aerosols collected on quartz filters. It is the basis for NIOSH Method 5040 and is fully compliant with the IMPROVE protocol. It features a new and improved ...
-
Manufactured by Biotechnix, Inc.based in USA
Aerosols from natural, anthropogenic and industrial sources—as well as airborne chemical and biological warfare agents—are a significant threat to human health and safety. Effective sampling and collection of aerosol particles is a critical first step in the detection and identification of these hazards. Identification ...
-
Manufactured by CBRN International Ltd.based in UNITED ARAB EMIRATES
The SASS® 2300 Wetted-Wall Air Sampler extracts airborne pathogens, particulates, bacteria and spores in liquid form for later analysis. Its patented wetted-wall aerosol collection method has earned U.S. Department of Homeland Security Certification under the U.S. Safety Act of 2002. The SASS 2300 offers extremely long sampling ...
-
Manufactured by In-Tox Products, LLCbased in USA
The Parallel Flow diffusion battery is useful in determining the mass fraction of submicron aerosols or when chemical and microscopic examination of collected submicron aerosol particles is important. This diffusion battery can be used with stable and unstable aerosol sources. This diffusion battery uses stages of increasing ...
-
Manufactured by Magee Scientific Companybased in USA
The DRI Model 2015 Multi-Wavelength Thermal/Optical Carbon Analyzer is the most advanced instrument in the world for the thermal analysis of the carbonaceous content of aerosol samples collected on ...
-
Manufactured by Magee Scientific Companybased in USA
The SootScan Model OT21 Optical Transmissometer bench top analyzer is a simple and robust instrument which measures the Black Carbon content of an aerosol sample collected on a filter, either from ambient air or from source ...
-
Manufactured by In-Tox Products, LLCbased in USA
An in-line filter holder holds either a 25 mm or 47 mm filter, depending on the model, in a fixed sample line. Filters are the primary standard used for determining aerosol concentration. Filters collect particulates by interception, inertial impaction, and diffusion as the aerosol is drawn through them. The sample flow ...
-
Manufactured by Research International, Inc.based in USA
The SASS 2300 delivers all the performance you need in a portable aerosol particle collection system. Extremely long sampling protocols of up to several days are supported and sample fluid volume is maintained constant over the entire collection period, independent of ambient air temperature or relative humidity, providing unsurpassed ...
-
Manufactured by SARAD GmbHbased in GERMANY
The poCAMon personal online continuous air monitor combines a very compact design with a high flow rate and long battery life. The unit measures long living aerosols as well as short living Radon daughters by alpha spectroscopy and beta counting. The instrument recognises if only natural Uranium aerosols have been collected and adjusts the ...
-
Manufactured by Amtech Military & Automation Systems (AMAS)based in CANADA
This portable aerosol test chamber gives you the ability to characterize and determine the field performance of your aerosol detection and collection systems in their intended operational environment. Air samples that include naturally occurring background can influence the results for biological detectors and collectors. Also, the ...
-
Manufactured by Gaumer Processbased in USA
aerosols come in contact with the fibers in filter media, uniting with other collected aerosols & growing to emerge as a droplet in downstream surface of media which is capable of being gravitationally drained. ...
-
Manufactured by Breath Explorbased in SWEDEN
ten Breath Explor samples or more per hour. To support the collection officer, we have developed a free instructive app. The samples are sent to our accredited partner laboratory for LC-MS/MS analysis. Breath Explor collects aerosol particles from the most distal parts of the lung through impaction. The samples can be analysed for the ...
-
Manufactured by KSL Biomedicalbased in USA
The Thermo Scientific™ AerosolSense™ sampler, a new pathogen surveillance solution, is designed to deliver timely and highly reliable insight into in-air pathogen presence for monitoring and improving facility safety protocols. Confidently help protect employees and communities while maintaining business and operational continuity. ...
-
Manufactured by Aerodyne Research, Inc.based in USA
The Aerodyne ToF-CIMS combines chemical ionization with high-resolution time-of-flight mass spectrometry for sensitive, real-time identification and quantification of gas-phase compounds in sampled ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you