Only show results available in Virginia? Ok

aerosol collection system Equipment

  • Premium

    Testo CU-2 - Particle Data Aquisition Unit

    Data aquisition unit CU-2 - Every instrument should have an easy way to store data and organize the information collected during testing and measurement programs.The CU-2 data acquisition unit uses AK protocol. The ViPR has 4 different controlle mode: AK Host Remote Control Mode, Remote Computer Software Control Mode, Software Control ...

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY. from Aerosol & Gas Dilution Product line

  • Aerosol-Recycling - Drum-based Can Recycling System

    We are now the SOLE UK AGENTS! We offer an Extended Slider Bar which deals with aerosols up to 750ml volume with longer piercing pins (US models do not have this spec).

    By Aerosol Recycling Co Uk based in Oswestry, UNITED KINGDOM.

  • Aerosol Particle Size Spectrometer - Model LAP 322 - Particle Size and Concentration Measurement

    The Aerosol Particle Size Spectrometer LAP 322 provides the determination of aerosol particle size distributions (0.2-40µm) and particle concentrations. It  is based on optical single-particle measurements by means of 90° scattered light measurement. By dint of high number of provided particle size classes a high particle sizing resolution can be ...

    By Topas GmbH based in Dresden, GERMANY. from Particle Size Measurement Product line

  • MSP - Model 2045 - High Output PSL Particle Generator

    The Model 2045 is a high output aerosol generating system designed to produce polystyrene latex (PSL) aerosols of a uniform particle size at a high rate for high efficiency filter (UPLA/HEPA) testing, leak detection and in-situ cleanroom certification. The system can generate up to 7.2 x 1010 PSL spheres per minute at 0.12 μm. When this aerosol ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

  • Fast Aerosol Spectrometer - TR-DMPS

    To measure aerosol size distributions, this instrument system performs three operational functions: charging, size classification, and detection. Particle charging is accomplished by exposing the aerosol sample to intense monochromatic UV light which results in photoelectric ejection of electrons from particle surfaces. The charged aerosol then ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • MSP - Model M2045S - Corn Oil Aerosol Generator

    The Model 2045 is a high output aerosol generating system designed to produce polystyrene latex (PSL) aerosols of a uniform particle size at a high rate for high efficiency filter (UPLA/HEPA) testing, leak detection and in-situ cleanroom certification. The system can generate up to 7.2 x 1010 PSL spheres per minute at 0.12 μm. When this aerosol ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

  • ERAC - Electrostatic Radioactive Aerosol Collector

    To assess a radiation contamination of the environment the easiest instrument is the evaluation of the external gamma radiation. The next important assessment of the environment is the aerosol activity which finally in the air of the ground-level atmosphere is inhaled by people for this is all above the alpha- and beta activity the criterion. The ...

    By BITT Technology-A Gesellschaft mbH based in Spillern, AUSTRIA. from Aerosol Monitoring Systems Product line

  • OC-EC Lab - Aerosol Analyzer

    The Lab OC-EC Aerosol Analyzer is the industry standard for environmental and workplace monitoring. This instrument uses a proven thermal-optical method to analyze for OC-EC aerosols collected on quartz filters. It is the basis for NIOSH Method 5040 and is fully compliant with the IMPROVE protocol. It features a new and improved microcontroller ...

    By Sunset Laboratory based in Tigard, OREGON (USA).

  • Beneq - Model FCS 500 - Functional Coating System

    The Beneq FCS 500 for nHALO research offers unprecedented freedom of choice of materials and particle sizes at the flick of a switch for laboratory-scale research and development. The Beneq FCS 500 Functional Coating System is a flexible and robust laboratory-scale tool for synthesis of nano-sized particles and coating research and development. ...

    By Beneq Oy based in Espoo, FINLAND. from Aerosol Coating Products Product line

  • Model Super 450 - Aerosol Can Crushers

    Electrical Requirements: Crusher: One 115/230 volt, 20/10 amps, single-phase dedicated circuit Collection System: One 115/230 volt, 12/6 amps, single-phase dedicated circuit. Crushing Force: 12,000 pounds. Operating Cycle Time: 8 Seconds. Crushing Chamber : Handles cans from 2 to 12 inches tall and 1 1/2 to 3 inches in diameter. Dimensions: 70'w x ...

    By Compactors Incorporated based in Hilton Head Island, SOUTH CAROLINA (USA). from Aerosol Can Crushers Product line

  • Teemark - Model Super 6 PJ-VC - Aerosol Can Crushers

    Power System Alternatives:. 1-1/2hp' 115/230 v 1ph 20/10a w/starter, 12/20 second cycle time. 3 hp' 208-230/460v, 3ph, 11-10/5a w/o starter, 12 sec cycle. Explosion Proof Class 1, Div. D. Crushing Force: 30,000 pounds. Cycle Time: 12 To 20 Seconds. Machine Dimensions: 55'W X 72'D X 107'H. Crusher Chamber: 16'w x 16'd x 18'h. Shipping Weight: 1300 ...

    By Compactors Incorporated based in Hilton Head Island, SOUTH CAROLINA (USA). from Aerosol Can Crushers Product line

  • Kimre - Model Aerosep - Multi-Stage Aerosol Separation Systems

    Aerosols are suspended liquid or solid particles ranging in diameter from the submicron range to the 10 to 20µm size. Kimre offers the AEROSEP Multi-Stage Aerosol Separation System to collect submicron particulates which are hygroscopic using the principles of condensation scrubbing. Aerosols as small as 0.2 microns in diameter pass through ...

    By Kimre, Inc. based in Homestead, FLORIDA (USA).

  • TeeMark - Model Super 200 - Aerosol Can Crusher

    Two hundred aerosol cans per hour capacity. This unit pierces and crushes the aerosol can to a ½ thick puck in 9 seconds while collecting the content.

    By Waste Control Systems Inc based in Phoenix, MARYLAND (USA). from Aerosol Can Recycling and Disposal Product line

  • Aerodyne - Model AMS - Aerosol Mass Spectrometer System

    The Aerodyne aerosol mass spectrometer (AMS) is the only currently available instrument capable of providing quantitative size and chemical mass loading information in real-time for non-refractory sub-micron aerosol particles. The AMS couples size-resolved particle sampling and mass spectrometric techniques into a single real-time measurement ...

    By Aerodyne Research, Inc. based in Billerica, MASSACHUSETTS (USA). from Other Product line

  • MSP - Model M1610 - PM Sampler and Mass Monitor (PSMM)

    The Model 1600 PM Sampler and Mass Monitor (PSMM) is a modern instrument designed for PM sampling and mass monitoring. Samples are collected on 47-mm-diameter filters while mass monitoring is accomplished with a quartz crystal microbalance (QCM). In its standard configuration the instrument includes two filter samplers and one QCM mass monitor. ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Air Samplers and Monitors Product line

  • Model Super 450 - Explosion Proof Aerosol Can Crusher

    Processes many different aerosol can sizes with a wide range of can contents – also handles small paint cans. The Super 450 Aerosol Crusher handles up to 450 cans per hour. Removes and captures 99% of can contents. Separates liquid can content from propellants, VOCs and other gaseous components. Crushed cans are considered empty by EPA ...

    By TeeMark Manufacturing Corporations based in Aitkin, MINNESOTA (USA). from Aerosol Can Crushers Product line

  • TeeMark - Model Super 450 - Aerosol Can Crushers

    Processes many different aerosol can sizes with a wide range of can contents. Separates liquid can content from propellants, voes and other gaseous components. Also handles small paint cans. Removes and captures 99% of can contents.

    By Waste Control Systems Inc based in Phoenix, MARYLAND (USA). from Aerosol Can Recycling and Disposal Product line

  • Lube Oil Vents Mist Eliminator

    AWS can contribute to the solution of many pollution control problems caused by oil mist. The lubricated rotating parts of all gas and steam turbines, turbo compressors and vacuum pumps generate a visible oil plume which is to be removed from the air vented to atmosphere. The installation of a simple but very effective mist eliminator on the lube ...

    By AWS Corporation srl based in Cologno al Serio (BG, ITALY. from Aerosol, Spray and Mist Separation Product line

  • Cloud-Aerosol Transport System (CATS)

    A high-altitude, fringe-imaging Doppler LiDAR with built-in high spectral resolution capabilities, CATS gathers data on both wind motion and the properties of clouds and aerosols. Presented with an instrument concept from NASA, Sigma Space designed and fabricated CATS from the ground up—in addition to providing integration, test, and field ...

    By Sigma Space Corporation based in Lanham-Seabrook, MARYLAND (USA). from Atmospheric Sensors Product line

  • MSP - Model M1600 - PM Sampler and Mass Monitor (PSMM)

    The Model 1600 PM Sampler and Mass Monitor (PSMM) is a modern instrument designed for PM sampling and mass monitoring. Samples are collected on 47-mm-diameter filters while mass monitoring is accomplished with a quartz crystal microbalance (QCM). In its standard configuration the instrument includes two filter samplers and one QCM mass monitor. ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Air Samplers and Monitors Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you