Only show results available in Virginia? Ok

aerosol dilution Equipment

  • Aerosol Dilution System - Model DIL 554 - Aerosol Diluter

    The dilution system DIL 554 is designed to accurately dilute aerosols to produce a defined particle concentration. It has a stainless-steel housing and is battery-operated. The main application is the verification of test aerosols for testing clean rooms. EN ISO 14644-3 defines the necessity of appropriate dilution systems when using test aerosols ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Dilution Product line

  • TSI - Model 3302A - Aerosol Diluter

    Aerosol Diluter 3302A reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary tubes. Two diluters in a tandem ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Diluters Product line

  • Palas - Model KHG 10 Series - Heatable Aerosol Dilution System

    The KHG 10 series of heatable dilution system builds upon the VKL series ejector principle. In addition to the advantages of the VKL series, the KHG series dilution system is configured to be heatable to 150°C (optionally up to 200°C) and is additionally pressure-resistant up to 10 bar overpressure. Isothermal and isobaric dilution can ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Dilution Systems Product line

  • Palas - Model VKL 10 - Aerosol Dilution Systems

    The welas VKL 10 series of dilution systems can reduce the concentration of aerosols by the dilution factor 01:10, also of very highly concentrated aerosols, in a defined and reliable way. The Palas VKL 10 dilution systems are used in vertical operation for the particle size range up to 20 µm for powders and dusts. Dilution factors of up to ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Dilution Systems Product line

  • Aerosol Diluter Model 3302A

    Our Aerosol Diluter reduces particle concentrations of high-concentration aerosols, providing a representative sample that meets the input requirements of the Aerodynamic Particle Sizer® (APS™) spectrometer. This APS accessory achieves dilution ratios of 100 to 1 and 20 to 1 using easy-to-change capillary tubes. Two diluters in a tandem ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Sizers Product line

  • Palas - Model VDD 10 - Aerosol Dilution Systems for Highly Concentrated Droplets

    The VDD series dilution system is especially used for diluting highly concentrated liquid drops. With the VDD series, the input dilution air is controlled using a mass flow controller. This mass flow controller is integrated in an external control unit and is infinitely variable. By using a mass flow controller in combination with suction from a ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Dilution Systems Product line

  • Premium

    Testo ASET15-1 - Evaporation Tube and Secondary Diluter

    The thermodiluter ASET15-1 - Evaporation tube and secondary diluter for the removal of volatile particles from a dilute exhaust sample. During dilution and cooling of vehicle exhaust, e.g. in a CVS tunnel, vapors of volatile material condense into nanodroplets, which distort the measurement of nanoparticles. ASET15-1 bounces volatiles back into ...

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY. from Aerosol & Gas Dilution Product line

  • Premium

    Testo CU-2 - Particle Data Aquisition Unit

    Data aquisition unit CU-2 - Every instrument should have an easy way to store data and organize the information collected during testing and measurement programs.The CU-2 data acquisition unit uses AK protocol. The ViPR has 4 different controlle mode: AK Host Remote Control Mode, Remote Computer Software Control Mode, Software Control ...

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY. from Aerosol & Gas Dilution Product line

  • Premium

    Testo - Model MD19-3E - Raw Gas Diluter

    MD19-3E (PND1) - The new MD19-3E is a re-engineered diluter. It keeps all advantages which a rotary diluter system brings with, the dilution ratio ranging from 1:15 up to 1:3000. Accurate dilution of aerosols usually requires precise and stable mass flow control, specially if large dilution ratios and ranges are requested. Our newly improved ...

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY. from Aerosol & Gas Dilution Product line

  • Dekati - Model Diluter - Dekati® Diluter

    Dekati® Diluter DI-1000 is a low-cost, simple and easy-to-operate device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robustness of the all stainless-steel design have made it a widely renowned choice for dilution of combustion aerosols.The nominal dilution factor for a ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Aerosol Diluter - Model DDS 560 - Dynamic Dilution System

    The Dynamic Dilution System DDS 560 is designed to definitely and reproducibly dilute aerosols according to EN ISO 14644 part 3 and VDI 3491 Blatt 15 with possibility to adjust the dilution factor. The adjusted dilution factor is shown on a display. On the basis of this principle particles are removed from the sample according to the chosen and ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Dilution Product line

  • TSI - Model 379020A - Rotating Disk Thermodiluter

    Proper dilution and conditioning of exhaust emissions is essential to obtain accurate size distribution and particle number measurements. The Rotating Disk Thermodiluter 379020A is highly regarded in the field of particle emission measurement, especially for sampling, diluting and conditioning exhaust from diesel and spark-ignition engines. And, ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Diluters Product line

  • Dekati - Model DAD - Axial Diluter

    Dekati® Axial Diluter DAD-100 is a simple and cost-effective dilution tool for any dilution task. Especially designed for use with Dekati® Instruments, the DAD-100 is very simple to install into any sampling or measurement system. All-stainless steel design makes it also possible to heat the diluter up to 500°C.

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Dekati - Model DEED - Engine Exhaust Diluter

    Dekati® Engine Exhaust Diluter DEED is a fully EURO5b/6 conform engine exhaust conditioning system. In contrast to multi-stage dilution systems in general, DEED is a simple, easy-to-use system that conditions the sample precisely and in a repeatable manner every time. The DEED fulfils all requirements and recommendations set in EURO5b/6 standard ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Aerosol Particle Size Spectrometer - Model LAP 322 - Particle Size and Concentration Measurement

    The Aerosol Particle Size Spectrometer LAP 322 provides the determination of aerosol particle size distributions (0.2-40µm) and particle concentrations. It  is based on optical single-particle measurements by means of 90° scattered light measurement. By dint of high number of provided particle size classes a high particle sizing resolution can be ...

    By Topas GmbH based in Dresden, GERMANY. from Particle Size Measurement Product line

  • Fast Aerosol Spectrometer - TR-DMPS

    To measure aerosol size distributions, this instrument system performs three operational functions: charging, size classification, and detection. Particle charging is accomplished by exposing the aerosol sample to intense monochromatic UV light which results in photoelectric ejection of electrons from particle surfaces. The charged aerosol then ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • Dekati - Model FPS - Fine Particle Sampler

    Dekati® Fine Particle Sampler is a guaranteed solution for diluting and conditioning aerosol and gaseous samples for measurement instruments. This versatile dilution system allows dilution factor adjustment between 1:20 and 1:200 and first stage dilution temperature settings between 0 and 350 °C. Temperatures and pressures in different parts of ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Grimm - Model 11-A - Aerosol Spectrometer

    The aerosol spectrometer 11-A from Grimm Aerosol Technik is the star among the portable fine dust measurement devices. The 11-A is popular with almost all occupational health and safety officers, dust monitoring specialists, but also with universities and research institutes as a top class device. With over 2,000 devices, the 11-A is successfully ...

    By GRIMM Aerosol Technik GmbH & Co. KG based in Ainring, GERMANY. from Indoor Air Quality Monitors Product line

  • Model PAS 2000 - Standard Real-Time Photoelectric Aerosol Sensor

    EcoChem has pioneered the use of the Photoelectric Aerosol Sensor (PAS) for real-time measurement of Carbon aerosols. Previous versions of the PAS monitor (PAS 1000i, 1000e and 1002i ) are widely used by regulatory, research and industrial organizations. Incorporating customer feedback and state-of-the-art advances in measurement techniques, the ...

    By EcoChem Analytics based in League City, TEXAS (USA). from Photoelectric Aerosol Sensor (PAS) Monitoring Technology Product line

  • Model M1040XP - Humidified Tandem Differential Mobility Analyzer (HTDMA)

    The Model 1040XP Humidified Tandem Differential Mobility Analyzer (HTDMA) is a multi-function aerosol instrument comprised of:  an atomizer aerosol generator, a non-radioactive electrical ionizer, a differential mobility analyzer (DMA) and a condensation particle counter (CPC) for monodisperse aerosol generation and measurement, a ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Particle Counters and Size Spectrometers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you