Only show results available in Virginia? Ok

aerosol dilution system Equipment

  • Palas - Model KHG 10 Series - Heatable Aerosol Dilution System

    The KHG 10 series of heatable dilution system builds upon the VKL series ejector principle. In addition to the advantages of the VKL series, the KHG series dilution system is configured to be heatable to 150°C (optionally up to 200°C) and is additionally pressure-resistant up to 10 bar overpressure. Isothermal and isobaric dilution can ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Dilution Systems Product line

  • Palas - Model VKL 10 - Aerosol Dilution Systems

    The welas VKL 10 series of dilution systems can reduce the concentration of aerosols by the dilution factor 01:10, also of very highly concentrated aerosols, in a defined and reliable way. The Palas VKL 10 dilution systems are used in vertical operation for the particle size range up to 20 µm for powders and dusts. Dilution factors of up to ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Dilution Systems Product line

  • Palas - Model VDD 10 - Aerosol Dilution Systems for Highly Concentrated Droplets

    The VDD series dilution system is especially used for diluting highly concentrated liquid drops. With the VDD series, the input dilution air is controlled using a mass flow controller. This mass flow controller is integrated in an external control unit and is infinitely variable. By using a mass flow controller in combination with suction from a ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Dilution Systems Product line

  • Dekati - Model Diluter - Dekati® Diluter

    Dekati® Diluter DI-1000 is a low-cost, simple and easy-to-operate device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robustness of the all stainless-steel design have made it a widely renowned choice for dilution of combustion aerosols.The nominal dilution factor for a ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Aerosol Dilution System - Model DIL 554 - Aerosol Diluter

    The dilution system DIL 554 is designed to accurately dilute aerosols to produce a defined particle concentration. It has a stainless-steel housing and is battery-operated. The main application is the verification of test aerosols for testing clean rooms. EN ISO 14644-3 defines the necessity of appropriate dilution systems when using test aerosols ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Dilution Product line

  • Aerosol Diluter - Model DDS 560 - Dynamic Dilution System

    The Dynamic Dilution System DDS 560 is designed to definitely and reproducibly dilute aerosols according to EN ISO 14644 part 3 and VDI 3491 Blatt 15 with possibility to adjust the dilution factor. The adjusted dilution factor is shown on a display. On the basis of this principle particles are removed from the sample according to the chosen and ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Dilution Product line

  • TSI - Model 379020A - Rotating Disk Thermodiluter

    Proper dilution and conditioning of exhaust emissions is essential to obtain accurate size distribution and particle number measurements. The Rotating Disk Thermodiluter 379020A is highly regarded in the field of particle emission measurement, especially for sampling, diluting and conditioning exhaust from diesel and spark-ignition engines. And, ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Diluters Product line

  • Testo ASET15-1 - Evaporation Tube and Secondary Diluter

    The thermodiluter ASET15-1 - Evaporation tube and secondary diluter for the removal of volatile particles from a dilute exhaust sample. During dilution and cooling of vehicle exhaust, e.g. in a CVS tunnel, vapors of volatile material condense into nanodroplets, which distort the measurement of nanoparticles. ASET15-1 bounces volatiles back into ...

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY. from Aerosol & Gas Dilution Product line

  • Testo CU-2 - Particle Data Aquisition Unit

    Data aquisition unit CU-2 - Every instrument should have an easy way to store data and organize the information collected during testing and measurement programs.The CU-2 data acquisition unit uses AK protocol. The ViPR has 4 different controlle mode: AK Host Remote Control Mode, Remote Computer Software Control Mode, Software Control ...

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY. from Aerosol & Gas Dilution Product line

  • Testo - Model MD19-3E - Raw Gas Diluter

    MD19-3E (PND1) - The new MD19-3E is a re-engineered diluter. It keeps all advantages which a rotary diluter system brings with, the dilution ratio ranging from 1:15 up to 1:3000. Accurate dilution of aerosols usually requires precise and stable mass flow control, specially if large dilution ratios and ranges are requested. Our newly improved ...

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY. from Aerosol & Gas Dilution Product line

  • Dekati - Model DAD - Axial Diluter

    Dekati® Axial Diluter DAD-100 is a simple and cost-effective dilution tool for any dilution task. Especially designed for use with Dekati® Instruments, the DAD-100 is very simple to install into any sampling or measurement system. All-stainless steel design makes it also possible to heat the diluter up to 500°C.

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Dekati - Model DEED - Engine Exhaust Diluter

    Dekati® Engine Exhaust Diluter DEED is a fully EURO5b/6 conform engine exhaust conditioning system. In contrast to multi-stage dilution systems in general, DEED is a simple, easy-to-use system that conditions the sample precisely and in a repeatable manner every time. The DEED fulfils all requirements and recommendations set in EURO5b/6 standard ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Aerosol Particle Size Spectrometer - Model LAP 322 - Particle Size and Concentration Measurement

    The Aerosol Particle Size Spectrometer LAP 322 provides the determination of aerosol particle size distributions (0.2-40µm) and particle concentrations. It  is based on optical single-particle measurements by means of 90° scattered light measurement. By dint of high number of provided particle size classes a high particle sizing resolution can be ...

    By Topas GmbH based in Dresden, GERMANY. from Particle Size Measurement Product line

  • Fast Aerosol Spectrometer - TR-DMPS

    To measure aerosol size distributions, this instrument system performs three operational functions: charging, size classification, and detection. Particle charging is accomplished by exposing the aerosol sample to intense monochromatic UV light which results in photoelectric ejection of electrons from particle surfaces. The charged aerosol then ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • Dekati - Model FPS - Fine Particle Sampler

    Dekati® Fine Particle Sampler is a guaranteed solution for diluting and conditioning aerosol and gaseous samples for measurement instruments. This versatile dilution system allows dilution factor adjustment between 1:20 and 1:200 and first stage dilution temperature settings between 0 and 350 °C. Temperatures and pressures in different parts of ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Model M1040XP - Humidified Tandem Differential Mobility Analyzer (HTDMA)

    The Model 1040XP Humidified Tandem Differential Mobility Analyzer (HTDMA) is a multi-function aerosol instrument comprised of:  an atomizer aerosol generator, a non-radioactive electrical ionizer, a differential mobility analyzer (DMA) and a condensation particle counter (CPC) for monodisperse aerosol generation and measurement, a ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Particle Counters and Size Spectrometers Product line

  • Palas - Model HMT 1000 - Heatable Modular Test System for Oil Mist Separators

    Quality assurance and the development of filters/separators/traps should preferably be performed under test conditions that are relevant to the actual conditions encountered in practice. For this reason, oil separators must be tested at high temperatures of up to 120°C and, depending on the type of application, at high pressures.

    By Palas GmbH based in Karlsruhe, GERMANY. from Filter Test Systems - Complete Filters Product line

  • Brink FAVS - Fuming Acid Vent System

    Safe and efficient collection of Oleum, Liquid SO3 and Chlorosulfonic Acid mists. The Brink® Fuming Acid Vent System by MECS® Inc. is an engineered, skid mounted sub micron mist removal device that is designed to control problems created by fuming acids that are vented to atmosphere. Typically the application is related to these fuming ...

    By MECS based in Chesterfield, MISSOURI (USA). from Brink Fiber Bed Mist Eliminators Product line

  • Dekati - Model HT- ELPI+ - High Temperature ELPI+

    Dekati® High Temperature ELPI®+­ (HT-ELPI®+) is a new version of the Dekati® ELPI®+ that enables real-time measurement of particle size distribution from 6 nm up to 10 µm with 10 Hz sampling rate. The High Temperature ELPI®+ allows direct measurement of up to 180 °C aerosol sample without the need to cool the sample, which makes the HT-ELPI®+ a ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Dekati Fine Particle Measurement Product line

  • Dekati - Model ELPI+ - Electrical Low Pressure Impactor

    ELPI®+ (Electrical Low Pressure Impactor) is an improved version of the widely used and well characterized ELPI® -system. ELPI®+ enables measurement of real-time particle size distribution and concentration in the size range of 6 nm – 10 µm with 10 Hz sampling rate. The ELPI®+ features include real-time stand-alone ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Dekati Fine Particle Measurement Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you