Aerosol Generation (Aerosol Monitoring) equipment in Asia & Middle East

  • Premium

    Cooper Environmental - Model QAG 825 - Quantitative Aerosol Generator (QAG)

    The QAG creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of the generation area to a drying chamber where they are dried to particles. The aerosol exiting the drying chamber contains known concentrations of analytes calculated from the QAG’s input parameters. The reference aerosol ...

    By Cooper Environmental Services Distributor in Toongsonghong, Laksi, THAILAND.

  • TSI - Model 3079A - Aerosol Generators

    Aerosol Generator 3079A is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.2 to 5.0 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected by a hood, making this ...

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • TSI - Model 3076 - Aerosol Generator

    Aerosol Generator Model 3076 is a Collison-type atomizer that generates aerosols of constant particle size in concentrations over 107 particles/cm3. Its nominal aerosol flow rate is 3.0 L/min. Stainless-steel components make it suitable for the specialized applications listed below, in additon to basic aerosol research.

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • TSI - Model 3079A - Aerosol Generator

    Aerosol Generator 3079A is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.2 to 5.0 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected b

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Large-Particle Aerosol Generator

    Designed primarily for filter testing, the Large-Particle Aerosol Generator produces highly concentrated aerosol in a broad particle-size range, from 0.1 to 10 µm in diameter. It produces potassium chloride (KCl) or other aerosols, and it meets the requirements of the proposed SAE J1669, ISO/CD 11155-1, and ASHRAE 52.2 test codes. This aerosol ...

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Vibrating Orifice Aerosol Generator

    The Vibrating Orifice Aerosol Generator (VOAG) is a highly accurate source of monodisperse particles in the range from 1 to 200 µm (initial droplet diameter measures 20 to 400 µm). Using a variety of solutes and solvents, this unique aerosol generator creates solid or liquid particles that are uniform in size, shape, density, and surface ...

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Fluidized Bed Aerosol Generator

    The Fluidized Bed Aerosol Generator (FBAG) is our general-purpose powder disperser. It prepares any dry, free-flowing powder for dispersion in a gas. The FBAG disperses powders over a size range from 0.5 to 40 µm, in concentrations from 10 to 100 mg/m3. A key feature of this aerosol generator is its stable output and concentration.

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Electrospray Aerosol Generator

    The Electrospray Aerosol Generator (EAG) produces high concentrations of monodisperse, submicrometer particles from 2 to 100 nm (initial droplet diameter of 150 nm, nominal). The Electrospray pushes a charged liquid solution or suspension through a capillary tube and exerts an electrical field on the liquid at the capillary tip. The electrical ...

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Submicrometer Monodisperse Aerosol Generation System

    Our Supermicrometer Monodisperse Aerosol Generation System lets you produce the most monodisperse particles possible in a laboratory. It generates supermicrometer particles (up to 200 µm in diameter) from nearly any material that can be put into solution with a volatile solvent.

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Aerosol Jet - Model 300 Series - Printer

    Aerosol Jet 300 Series systems are ideally suited to develop next generation processes and devices for photovoltaic, touch screen displays, 3D interconnects and other printed electronics and biologics applications. A number of Aerosol Jet 300 Series system configurations are available to meet your specific application requirements.

    By Optomec Inc. Office in Singapore, SINGAPORE. from 3D Printed Electronics - Aerosol Jet System Product line

  • Filtered Air Supply

    The Filtered Air Supply is a vital accessory for most aerosol generators. It removes oil or other liquid droplets from the incoming air using two prefilters. It also removes any remaining moisture in the air stream by passing the air through an advanced membrane. (No more drying of desiccant material!) Plus, it removes fine particles by including ...

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Conductive Silicone Tubing for Particle Transport

    Conductive silicone tubing is critical for aerosol experiments because it reduces the build-up of static charge and minimizes particle loss to the tubing wall. TSI offers flexible, conductive tubing in four sizes to accommodate most experimental setups.

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Mass Flowmeter for Aerosol Research Applications

    This Mass Flowmeter is perfect for monitoring flows in your aerosol experimental setups. It measures mass flow rates up to 200 std. L/min, with exceptional accuracy at all flow rates. Plus, it measures flow volume, gas temperature, and absolute pressure. A low pressure-drop minimizes the impact of flow circuit back-pressure on your test ...

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Small-Scale Powder Disperser

    The Small-Scale Powder Disperser (SSPD) produces small quantities of powder by lifting particles from a turntable using a venturi aspirator. The turntable rotates at variable speeds to control aerosol concentrations. Shear forces created in the SSPD are sufficient to deagglomerate most dry particles in the range from 0.5 to 50 µm.

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Diffusion Dryer

    The Diffusion Dryer is an accessory that is used commonly to dry and remove water vapor from aerosol generated by our Atomizers. The dryer includes a removable extractor for collecting large water droplets. Desiccant surrounding the aerosol flow path removes excess moisture by diffusional capture. Because the aerosol never comes in contact with ...

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Nanometer Aerosol Sampler

    The Nanometer Aerosol Sampler (NAS) allows you to sample charged particles, like those from the output of a Differential Mobility Analyzer (DMA), onto sample substrates for further analysis. This aerosol sampler lets you control the spot size of the deposition using two electrode sizes and get a uniform deposition size that is optimal for your ...

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Process Aerosol Monitor

    The Process Aerosol Monitor (PAM) measures high-concentration, monodisperse aerosol, like that produced with our Model 3475 Condensation Monodisperse Aerosol Generator (CMAG) or other Sinclair-LaMer-type generators. The PAM is a process instrument that monitors aerosols on-line, measuring particle size and concentration in real time. It validates ...

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Electrostatic Classifiers and Differential Mobility Analyzers

    TSI Electrostatic Classifiers are primary-standard instruments that produce highly monodisperse, submicrometer aerosols. They have been used in a variety of aerosol-generation or particle-sizing applications with highly accurate and repeatable results.

    By TSI Incorporated Distributor in ISRAEL. from Aerosol Generators & Dispersers Product line

  • Premium

    Peak Scientific - Corona Nitrogen 1010 - N2 Generator

    Our Corona 1010 has been engineered to meet the specifications of the Thermo Scientific Corona Veo Charged Aerosol Detector. This system can be purchased as a single nitrogen unit for laboratories with an external air supply or with a stackable air compressor for laboratories without an external air supply. The Corona system is also suitable for a ...

    By Peak Scientific Instruments Ltd Office in New Delhi, INDIA. from Nitrogen Product line

  • Testo - Model MD19-3E - Raw Gas Diluter

    MD19-3E (PND1) - The new MD19-3E is a re-engineered diluter. It keeps all advantages which a rotary diluter system brings with, the dilution ratio ranging from 1:15 up to 1:3000. Accurate dilution of aerosols usually requires precise and stable mass flow control, specially if large dilution ratios and ranges are requested. Our newly improved ...

    By Testo SE & Co. KGaA Distributor in UNITED ARAB EMIRATES. from Aerosol & Gas Dilution Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you