Aerosol Generation (Aerosol Monitoring) equipment in Australasia

  • Showcase

    Cooper Environmental - Model Xact 825 - Quantitative Aerosol Generator (QAG)

    The Quantitative Aerosol Generator (QAG) creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of generation area to a drying chamber where they are dried to salt particles. Depending on the application for the salt particles the size can be varied to a number mean between 0.1 and 2 µm in ...

    By Cooper Environmental Services Distributor in Knoxfield, AUSTRALIA.

  • TSI - Model 3076 - Aerosol Generator

    Aerosol Generator Model 3076 is a Collison-type atomizer that generates aerosols of constant particle size in concentrations over 107 particles/cm3. Its nominal aerosol flow rate is 3.0 L/min. Stainless-steel components make it suitable for the specialized applications listed below, in additon to basic aerosol research.

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • TSI - Model 3079A - Aerosol Generators

    Aerosol Generator 3079A is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.2 to 5.0 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected by a hood, making this ...

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • TSI - Model 3079A - Aerosol Generator

    Aerosol Generator 3079A is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.2 to 5.0 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected b

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • Aerosol Nebulizer - Model ATM 210, 210/H - Atomizer Aerosol Generator

    The ATM 210 Liquid Aerosol Generator produces aerosols with known properties in accordance with guideline VDI 3491. This special model facilitates generation of aerosol into pressurised vessels (up to 10bar). Its design ensures a highly stable particle size distribution and concentration with high reproducibility and a high aerosol output. The ...

    By Topas GmbH Distributor in AUSTRALIA. from Aerosol Generation from Liquids Product line

  • Aerosol Nebulizer - Model ATM 226 - Atomizer Aerosol Generator with Pump

    The Atomizer Aerosol Generator ATM 226 is especially suited for clean room and filter testing applications and characterized by:- Compact stainless steel housing - easy-to-clean- Higher mass output up to 2.5 g/h- Built-in compressor - direct operation with mains supply 100..240VAC- With substances DOP or DEHS it produces spherical particles of ...

    By Topas GmbH Distributor in AUSTRALIA. from Aerosol Generation from Liquids Product line

  • Vibrating Orifice Aerosol Generator

    The Vibrating Orifice Aerosol Generator (VOAG) is a highly accurate source of monodisperse particles in the range from 1 to 200 µm (initial droplet diameter measures 20 to 400 µm). Using a variety of solutes and solvents, this unique aerosol generator creates solid or liquid particles that are uniform in size, shape, density, and surface ...

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • Large-Particle Aerosol Generator

    Designed primarily for filter testing, the Large-Particle Aerosol Generator produces highly concentrated aerosol in a broad particle-size range, from 0.1 to 10 µm in diameter. It produces potassium chloride (KCl) or other aerosols, and it meets the requirements of the proposed SAE J1669, ISO/CD 11155-1, and ASHRAE 52.2 test codes. This aerosol ...

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • Fluidized Bed Aerosol Generator

    The Fluidized Bed Aerosol Generator (FBAG) is our general-purpose powder disperser. It prepares any dry, free-flowing powder for dispersion in a gas. The FBAG disperses powders over a size range from 0.5 to 40 µm, in concentrations from 10 to 100 mg/m3. A key feature of this aerosol generator is its stable output and concentration.

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • Electrospray Aerosol Generator

    The Electrospray Aerosol Generator (EAG) produces high concentrations of monodisperse, submicrometer particles from 2 to 100 nm (initial droplet diameter of 150 nm, nominal). The Electrospray pushes a charged liquid solution or suspension through a capillary tube and exerts an electrical field on the liquid at the capillary tip. The electrical ...

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • Model AG-E3 - Electric Aerosol Generator

    The AG-E3 laskin nozzle aerosol generator is a completely self-contained product (no external compressor needed) designed to incorporate the functionality of both of our previous electric cold laskin nozzle model generators (AG-E1 & AG-E2).  The AG-E3 offers the flexibility to leak test low airflow filter systems such as animal racks and ...

    By TEC Services, Inc. Distributor in Bayswater North, AUSTRALIA.

  • Submicrometer Monodisperse Aerosol Generation System

    Our Supermicrometer Monodisperse Aerosol Generation System lets you produce the most monodisperse particles possible in a laboratory. It generates supermicrometer particles (up to 200 µm in diameter) from nearly any material that can be put into solution with a volatile solvent.

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • Fog Generator - Model CFG 290 - Flow Visualization

    The Condensation Fog Generator CFG 290 is used for visualization of air flows and generates a very dense, good visible fog. The fog has a long lifetime in rooms. Possible depositions of fog droplets on surfaces evaporate after a certain time residue-free. The fog is on principle sterile, non-toxic and free of oil/grease.The Fogger is especially ...

    By Topas GmbH Distributor in AUSTRALIA. from Aerosol Generation from Liquids Product line

  • Dust Generator - Model SAG 410 - Dust Feeder and Disperser

    Dust is defined as a dispersion of fine solid particles in gas. It is often needed for tests, research and quality assurance tasks. For that the particle concentration and the particle size should be known and adjusted. A proven method for metering powder to the disperser is to use a moving toothed belt. The well defined spaces between the teeth ...

    By Topas GmbH Distributor in AUSTRALIA. from Aerosol Generation from Solid Particles - Dust Disperser Product line

  • Dust Generator - Model SAG 420 - Powder Dosing and Dispersing for ISO 5011 Testing

    The Dust Feeder / Dust Disperser SAG 420 is a device for generating aerosols by transforming a powdered solid into the air-floating state (dust). Due to its special features the device can preferably be used in efficiency and capacity tests of filters and separators such as tests according to ISO 5011. - high dosing continuity of different dusts ...

    By Topas GmbH Distributor in AUSTRALIA. from Aerosol Generation from Solid Particles - Dust Disperser Product line

  • Aerosol Neutralizer - Model EAN 581 - Bipolar Electrostatic Discharger

    The mechanical interaction of particles, especially solid ones, may cause undesirable levels of electrostatic charge. Test dusts must be generated with a high degree of reproducibility for instance when evaluating aerosol separation techniques such as cyclones, filters or impactors. Comparable results can only be obtained at controlled and similar ...

    By Topas GmbH Distributor in AUSTRALIA. from Aerosol Conditioning and Sampling Product line

  • Small-Scale Powder Disperser

    The Small-Scale Powder Disperser (SSPD) produces small quantities of powder by lifting particles from a turntable using a venturi aspirator. The turntable rotates at variable speeds to control aerosol concentrations. Shear forces created in the SSPD are sufficient to deagglomerate most dry particles in the range from 0.5 to 50 µm.

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • Diffusion Dryer

    The Diffusion Dryer is an accessory that is used commonly to dry and remove water vapor from aerosol generated by our Atomizers. The dryer includes a removable extractor for collecting large water droplets. Desiccant surrounding the aerosol flow path removes excess moisture by diffusional capture. Because the aerosol never comes in contact with ...

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • Nanometer Aerosol Sampler

    The Nanometer Aerosol Sampler (NAS) allows you to sample charged particles, like those from the output of a Differential Mobility Analyzer (DMA), onto sample substrates for further analysis. This aerosol sampler lets you control the spot size of the deposition using two electrode sizes and get a uniform deposition size that is optimal for your ...

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

  • Electrostatic Classifiers and Differential Mobility Analyzers

    TSI Electrostatic Classifiers are primary-standard instruments that produce highly monodisperse, submicrometer aerosols. They have been used in a variety of aerosol-generation or particle-sizing applications with highly accurate and repeatable results.

    By TSI Incorporated Distributor in AUSTRALIA. from Aerosol Generators & Dispersers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you