Only show results available in Virginia? Ok

Aerosol Generation (Aerosol Monitoring) equipment

  • Conductive Silicone Tubing for Particle Transport

    Conductive silicone tubing is critical for aerosol experiments because it reduces the build-up of static charge and minimizes particle loss to the tubing wall. TSI offers flexible, conductive tubing in four sizes to accommodate most experimental setups.

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Filtered Air Supply

    The Filtered Air Supply is a vital accessory for most aerosol generators. It removes oil or other liquid droplets from the incoming air using two prefilters. It also removes any remaining moisture in the air stream by passing the air through an advanced membrane. (No more drying of desiccant material!) Plus, it removes fine particles by including ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Mass Flowmeter for Aerosol Research Applications

    This Mass Flowmeter is perfect for monitoring flows in your aerosol experimental setups. It measures mass flow rates up to 200 std. L/min, with exceptional accuracy at all flow rates. Plus, it measures flow volume, gas temperature, and absolute pressure. A low pressure-drop minimizes the impact of flow circuit back-pressure on your test ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Small-Scale Powder Disperser

    The Small-Scale Powder Disperser (SSPD) produces small quantities of powder by lifting particles from a turntable using a venturi aspirator. The turntable rotates at variable speeds to control aerosol concentrations. Shear forces created in the SSPD are sufficient to deagglomerate most dry particles in the range from 0.5 to 50 ┬Ám.

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Diffusion Dryer

    The Diffusion Dryer is an accessory that is used commonly to dry and remove water vapor from aerosol generated by our Atomizers. The dryer includes a removable extractor for collecting large water droplets. Desiccant surrounding the aerosol flow path removes excess moisture by diffusional capture. Because the aerosol never comes in contact with ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Nanometer Aerosol Sampler

    The Nanometer Aerosol Sampler (NAS) allows you to sample charged particles, like those from the output of a Differential Mobility Analyzer (DMA), onto sample substrates for further analysis. This aerosol sampler lets you control the spot size of the deposition using two electrode sizes and get a uniform deposition size that is optimal for your ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Process Aerosol Monitor

    The Process Aerosol Monitor (PAM) measures high-concentration, monodisperse aerosol, like that produced with our Model 3475 Condensation Monodisperse Aerosol Generator (CMAG) or other Sinclair-LaMer-type generators. The PAM is a process instrument that monitors aerosols on-line, measuring particle size and concentration in real time. It validates ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Electrostatic Classifiers and Differential Mobility Analyzers

    TSI Electrostatic Classifiers are primary-standard instruments that produce highly monodisperse, submicrometer aerosols. They have been used in a variety of aerosol-generation or particle-sizing applications with highly accurate and repeatable results.

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Generators & Dispersers Product line

  • Premium

    Peak Scientific - Corona Nitrogen 1010 - N2 Generator

    Our Corona 1010 has been engineered to meet the specifications of the Thermo Scientific Corona Veo Charged Aerosol Detector. This system can be purchased as a single nitrogen unit for laboratories with an external air supply or with a stackable air compressor for laboratories without an external air supply. The Corona system is also suitable for a ...

    By Peak Scientific Instruments Ltd based in Inchinnan, UNITED KINGDOM. from Nitrogen Product line

  • Citra Gloss - All Surface Duster & Polish Spray - 12 Cans/Case

    New generation aerosol for cleaning, polishing, and protecting many surfaces. Quick breaking foam provides for easy wipe-out to restore luster and enhance beauty. Contains no wax, eliminating surface build-up. Effective on all hard surfaces: laminate, wood, baked enamel, porcelain, etc. Leaves area with fresh citrus aroma.

    By Interstate Products Inc based in Sarasota, FLORIDA (USA). from Aerosols - Polishes & Protectants Product line

  • Diffusion Dryer - Model DDU 570 - Diffusion Dryer

    The Diffusion Dryer DDU 570 has been developed mainly as additional equipment for the Aerosol Generators produced by Topas GmbH. The diffusion dryer consists of an Acryl tube with 2 caps on its ends and tube connectors. In the operation status the dryer is filled with Silica gel. The aerosol to be dried is streaming through 3 screen pipes which ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Conditioning and Sampling Product line

  • Moudi-II and NanoMoudi-II - Model 120 122 125 - Micro-Orifice Uniform-Deposit Impactor

    Model 120, Model 122, Model 125 Moudi-II and NanoMoudi-II IMPACTORS are 2nd generation Micro-Orifice, Uniform-Deposit Impactors from MSP. The MOUDI impactors are noted for their superior aerodynamic design, sharp cut-size, and low particle loss characteristics. Up to 2000 precision micro-orifice nozzles are used to reduce pressure drop, jet ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Cascade Impactors Product line

  • Extinguishing Aerosol

    All Fire Extinguishing Aerosol Generators use the latest generation of the stable SBK aerosol forming solid compound (containing no pyrotechnic substances). Upon activation the solid compound is transformed into a rapidly expanding, highly efficient and highly effective fire extinguishing aerosol, based on Potassium salts.

    By Genco Electro-Mechanical based in Cairo, EGYPT. from Fire Fighting System Product line

  • Testo - Model MD19-3E - Raw Gas Diluter

    MD19-3E (PND1) - The new MD19-3E is a re-engineered diluter. It keeps all advantages which a rotary diluter system brings with, the dilution ratio ranging from 1:15 up to 1:3000. Accurate dilution of aerosols usually requires precise and stable mass flow control, specially if large dilution ratios and ranges are requested. Our newly improved ...

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY. from Aerosol & Gas Dilution Product line

  • Model AMS02 - Mobile Aerosol Monitoring System

    This is a special version of the AMS series of BITT Technology. The AMS02 units are generally characterized as multi-detector equipment with an automatic sample changer. The AMS02M-2008 is having one or two radiation detectors but manual sample changing. By using the one detector system a PIPS detector is always inserted for the alpha and the ...

    By Gihmm GmbH based in Spillern, AUSTRIA. from Aerosol Monitoring Systems Product line

  • Ecotech - Model Aurora 2000 - PM Correlating Nephelometer

    The Aurora 2000 PM Correlating Nephelometer is part of the ‘new generation’ nephelometers using a single wavelength and an BETA monitor to measure aerosol light scattering and derive particulate concentrations. The Aurora 2000 enables the calculation of a correlation factor based on a PM2.5 reference method which is then used to derive ...

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA. from Particulates - Aerosol Research Instruments Product line

  • Silicone Lube - Aerosol Spray - 12 Cans/Case

    This genereal purpose aerosol lubricant eliminates the effect of friction on equipment that squeaks, sticks or binds. Silicone Lube is made with reacted grade silicone to offer superior lubrication on machiner like gears, locks, hinges and more. This product is also formulated with fast drying solvets to prevent and seal out moisture.

    By Interstate Products Inc based in Sarasota, FLORIDA (USA). from Aerosols - Automotive & Fleet Product line

  • Kanomax - Model AES-1000 - Aerosol Monitor

    The Aerosol Monitor which has easy-to-read display, and link to Ethernet system, can materialize simplified monitoring of Particulates at multiple location. It's the perfect for monitoring any place where you need simplified cleanliness level monitoring, such as the gowning area of a cleanroom.The monitor provides stable and sensitive detection ...

    By Kanomax USA, Inc. based in Andover, NEW JERSEY (USA).

  • Lube Oil Vents Mist Eliminator

    AWS can contribute to the solution of many pollution control problems caused by oil mist. The lubricated rotating parts of all gas and steam turbines, turbo compressors and vacuum pumps generate a visible oil plume which is to be removed from the air vented to atmosphere. The installation of a simple but very effective mist eliminator on the lube ...

    By AWS Corporation Srl based in Cologno al Serio (BG), ITALY. from Aerosol, Spray and Mist Separation Product line

  • Dekati - Model DEED - Engine Exhaust Diluter

    Dekati® Engine Exhaust Diluter DEED is a fully EURO5b/6 conform engine exhaust conditioning system. In contrast to multi-stage dilution systems in general, DEED is a simple, easy-to-use system that conditions the sample precisely and in a repeatable manner every time. The DEED fulfils all requirements and recommendations set in EURO5b/6 standard ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you