Only show results in Texas? Ok

aerosol generation system (Aerosol Monitoring) equipment

  • Showcase

    Micro Pulse LiDAR - Model MiniMPL - Atmospheric Monitoring System

    The first generation of micro pulse lidar technology was designed by NASA for detecting high cirrus clouds. Our subsequent commercial “Micro Pulse LiDAR” generations (MPL and MiniMPL) have evolved with the goal of making the most cost-effective, robust, and sensitive backscatter lidar possible. This has been achieved by using quality ...

    By Micro Pulse LiDAR, part of Hexagon based in Lanham, MARYLAND (USA).

  • Premium

    CTP - Mechanical-Thermal Filter

    Removal of sticky particulate (e.g. tar) and aerosols: CTP’s prefilters are filled with high temperature-proof ceramic saddles which generate a turbulent flow and allow for a rapid bake-out of deposits. Due to the depth and the volume of the filter packing particles, tar and aerosols are removed from the waste gas to a high degree.

  • Handix - Portable Aerosol Generation System (PAGS)

    The Portable Aerosol Generation System (PAGS) is a robust, light-weight, quiet jet nebulizer designed specifically for aerosol scientists. It is the go-to tool when we calibrate our aerosol instruments. Unlike most other commercial aerosol generators, it can be powered from its onboard rechargable battery, making it ideal for use during field ...

    By Handix Scientific LLC based in Boulder, COLORADO (USA).

  • Submicrometer Monodisperse Aerosol Generation System

    Our Supermicrometer Monodisperse Aerosol Generation System lets you produce the most monodisperse particles possible in a laboratory. It generates supermicrometer particles (up to 200 µm in diameter) from nearly any material that can be put into solution with a volatile solvent.

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Submicrometer Monodisperse Aerosol Generation System Product line

  • Ulpatek - Safe Change Filter Housing System

    Safe change filter casings are used for filtering particles, aerosols and for protection of operator from radioactive, toxic, bacterial particles and gasses while filter maintenance. 

    By ULPATEK Air Filter Manufacturing Inc. based in Esenyurt, TURKEY. from System Equipments Product line

  • Model AG-A1 - Aerosol Generator

    The AG-A1 Laskin Nozzle aerosol generator is designed especially for testing of biological safety cabinets and filter systems from 500 to 5000 cfm. The AG-A1 uses simple, easy to operate controls.  The generator utilizes 4 Laskin nozzles, which provides 10ug/l of aerosol when introduced into 5400 cfm of airflow*. This aerosol concentration is ...

    By TEC Services, Inc. based in New Oxford, PENNSYLVANIA (USA).

  • X-Tinguish - Model FST - Handheld Aerosol Generator

    The new X-Tinguish FST is the world's most advanced aerosol firefighting tool. Able to remove over 900° F of heat in thirty seconds, the FST is our best aerosol generator yet.With its cutting-edge non-pyrotechnical pull pin, the FST uses an electrical system to generate aerosol in places unsafe for flames. Extensive research in the field of ...

    By Flame Guard USA based in Lake Barrington, ILLINOIS (USA).

  • Model TDA-4 - Aerosol Generators

    The TDA-4 series family of Laskin-Nozzle aerosol generators are durable, portable, and reliable. Designed for testing filter systems ranging from small glove boxes to large Cleanroom plenums, ATI Laskin Nozzle generators provide the ideal solution for creating a poly-dispersed, sub micron aerosol to certify and qualify in-situ filter systems. End ...

    By Air Techniques International (ATI) based in Hertfordshire, UNITED KINGDOM. from Aerosol Generators Product line

  • MSP - Model M2045S - Corn Oil Aerosol Generator

    The Model 2045 is a high output aerosol generating system designed to produce polystyrene latex (PSL) aerosols of a uniform particle size at a high rate for high efficiency filter (UPLA/HEPA) testing, leak detection and in-situ cleanroom certification. The system can generate up to 7.2 x 1010 PSL spheres per minute at 0.12 μm. When this aerosol ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

  • MSP - Model 2045 - High Output PSL Particle Generator

    The Model 2045 is a high output aerosol generating system designed to produce polystyrene latex (PSL) aerosols of a uniform particle size at a high rate for high efficiency filter (UPLA/HEPA) testing, leak detection and in-situ cleanroom certification. The system can generate up to 7.2 x 1010 PSL spheres per minute at 0.12 μm. When this aerosol ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

  • NUCON - Model AGT - Aerosol Generator

    The NUCON Model AGT is a high-output portable thermal aerosol (DOP or PAO) generator. It can provide up to 241 mL/min of submicron PAO, or 121 mL/min of submicron DOP, aerosol. System pressure indicator and all operational controls are on the front panel. Liquid to gas phase conversion takes place in a continuous stainless steel coil cast in an ...

    By NUCON International, Inc. based in Columbus, OHIO (USA). from Quality Instruments Product line

  • Concept - Model MiniColt 4S - Portable Smoke System

    The Mini Colt 4S is a varient of our best selling Colt 4 model. Specifically designed for use in clean room environments. Concept have reduced the size and the weight of the MIni Colt 4S to make the operation simple and practical. The artificial smoke produced from the Mini Colt 4S is extremly persistent with a particle size of just 0.2MMD. The ...

    By Concept Smoke Systems based in Maidenhead, UNITED KINGDOM.

  • Model Compact - Thermal Aerosol Generator

    TEC Services is proud to become the only US and Canadian distributor of this revolutionary thermal aerosol generator manufactured by S & M Electronics Limited. The Compact thermal aerosol generator is designed especially for testing of air handler units and/or HEPA filter systems from 5,300 to 53,000 cfm.

    By TEC Services, Inc. based in New Oxford, PENNSYLVANIA (USA).

  • Aerosol Nebulizer - Model ATM 226 - Atomizer Aerosol Generator with Pump

    The Atomizer Aerosol Generator ATM 226 is especially suited for clean room and filter testing applications and characterized by:- Compact stainless steel housing - easy-to-clean- Higher mass output up to 2.5 g/h- Built-in compressor - direct operation with mains supply 100..240VAC- With substances DOP or DEHS it produces spherical particles of ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Generation from Liquids Product line

  • IQAir CleanZone - Model SL - Stand Alone Air Filtration System

    The IQAir CleanZone SL stand-alone air filtration system is engineered for applications requiring high volume removal of particulates and aerosols at the lowest sound levels. The IQAir CleanZone SL, with an exceptional airflow capacity of up to 800 m3 per hour, is used to provide clean air in a broad range of environments with insufficient or no ...

    By Commercial Air Filtration based in London, UNITED KINGDOM. from General Product line

  • Model 6D - Self-Contained Laskin-Nozzle Aerosol Generator

    The 6D is a small, light, and rugged portable, self-contained Laskin-Nozzle aerosol generator. It is ideal for testing a wide variety of filter systems with airflows up to 2,000 cfm by generating a poly-dispersed, sub-micron aerosol. Applications include workstations, negative- pressure filtration units, biological safety cabinets, ceiling modules ...

    By Air Techniques International (ATI) based in Hertfordshire, UNITED KINGDOM. from Aerosol Generators Product line

  • Extinguishing Aerosol

    All Fire Extinguishing Aerosol Generators use the latest generation of the stable SBK aerosol forming solid compound (containing no pyrotechnic substances). Upon activation the solid compound is transformed into a rapidly expanding, highly efficient and highly effective fire extinguishing aerosol, based on Potassium salts.

    By Genco Electro-Mechanical based in Cairo, EGYPT. from Fire Fighting System Product line

  • Aerosol Jet Lab Systems

    Aerosol Jet Lab systems are ideally suited to develop next generation processes and devices for photovoltaic, touch screen displays, 3D interconnects and other printed electronics and biologics applications. A number of Aerosol Jet Lab system configurations are available to meet your specific application requirements. Click here for more ...

    By Optomec Inc. based in Albuquerque, NEW MEXICO (USA).

  • Particle Generator Model 8026

    Some locations may not contain a naturally-occurring ambient particle concentration for fit testing with the PORTACOUNT® Respirator Fit Tester. This is often due to high-efficiency filters found in some specialized building ventilation systems. The particle generator produces a non-detectable, low concentration salt (NaCl) aerosol in the proper ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Respirator Fit Testing Product line

  • Salamandra Safety - Model AGS-7/1 - Aerosol Fire Extinguisher AGS-7/1

    AGS-7 Series designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. Due to injector which is installed on the generator, the aerosol is actively mixed with air, ...

    By Salamandra Safety based in Moscow, RUSSIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you