Only show results available in Connecticut? Ok

aerosol particle counter (Aerosol Monitoring) equipment

  • Premium

    Lasair III - Model 310B, 310C, 350L, 5100 - Aerosol Particle Counter

    The Lasair® III Aerosol Portable Particle Counter is designed for cleanrooms with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is clean. It can be used for both remote and mobile routine cleanroom monitoring. We know the ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    Nano-ID - Model NPC10 - Aerosol Particle Counter

    The Nano-ID® NPC10 Aerosol Particle Counter is the first condensation particle counter specifically developed for ultra-clean manufacturing environments. It provides meaningful data fast by introducing fluid to capture even the smallest particles. This instrument combines 10 nm sensitivity with a high sample flow rate and the lowest zero ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    Model AM ll – 16/32 - Aerosol Manifold for Air Particle Counters

    The AM ll Manifold offers advanced features for sequentially monitoring aerosol contamination at multiple locations with a fixed particle counter. The AM ll is ideal for trend analysis and cleanroom verification when continuous monitoring is not needed. Compatability: Lasair® II or Lasair lll airborne particle counters, ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    Lasair III - Model 110 - Airborne Particle Counter

    The Lasair III 110 Aerosol Particle Counter is a laser diode-based true 0.100μm particle counter with 1.00CFM flow rate that doesn’t negatively impact your environment. It provides real-time measurement of yield-impacting particles with three configurations to meet your unique application needs. With a comprehensive set of features and ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    HPD - Model III - High Pressure Diffuser

    The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    Model HPD II - High Pressure Diffuser

    The HPD II reduces the pressure of dry, inert, non-toxic, non‑flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric pressure.

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Airmodus - Model A20 - Condensation Particle Counter

    Airmodus Condensation Particle Counters are designed to count individual aerosol particles accurately from very low concentrations to high concentrations. They are ideal for ambient air monitoring as well as aerosol research. The A20 is a robust and reliable tool for aerosol particle measurements in all applications where precision and sensitivity ...

    By Airmodus Oy based in Helsinki, FINLAND.

  • Airmodus - Model A23 - Condensation Particle Counter for Vehicle Emissions

    Airmodus A23 Condensation Particle Counter is a user-friendly tool for all applications where counting aerosol particles larger than 23 nm is a necessity. It fulfills the requirements of the Particle Measurement Protocol (PMP) for EURO 5/6. The A23 can be used both as a stand-alone instrument for measuring the total particle number concentration, ...

    By Airmodus Oy based in Helsinki, FINLAND.

  • Klotz - Model ATM 225 - Aerosol Generator

    The aerosol generator ATM 225 is used for generating test aerosols with defined properties. The number concentration of the aerosol particles can be set. From the determined concentration distributions of the produced DEHS aerosol it becomes evident that in the range of expected MPPS (Most Penetration Particle 0.2-0.3 μm) a very high particle ...

    By Markus Klotz GmbH based in Bad Liebenzell, GERMANY.

  • Electrical Aerosol Detector Model 3070A

    The Electrical Aerosol Detector (EAD) measures a key aerosol parameter believed to indicate the effective surface area of particles that can be deposited in the lung. This aerosol detector is a unique complement to our line of CPCs. Like a CPC, the EAD measures particle concentration as a function of time. But it also measures a parameter called ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Counters & Detectors Product line

  • Aerosol Dilution System - Model DIL 554 - Aerosol Diluter

    The dilution system DIL 554 is designed to accurately dilute aerosols to produce a defined particle concentration. It has a stainless-steel housing and is battery-operated. The main application is the verification of test aerosols for testing clean rooms. EN ISO 14644-3 defines the necessity of appropriate dilution systems when using test aerosols ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Dilution Product line

  • Aerosol Electrometer Model 3068B

    The Aerosol Electrometer provides accurate measurements of electrical current and flow rate. It measures total net charge on aerosol particles from 0.002 to 5 µm. When paired with a TSI Electrostatic Classifier, the Aerosol Electrometer measures the number concentration of monodisperse aerosol. This configuration is used primarily for calibrating ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Counters & Detectors Product line

  • Aerosol Diluter - Model DDS 560 - Dynamic Dilution System

    The Dynamic Dilution System DDS 560 is designed to definitely and reproducibly dilute aerosols according to EN ISO 14644 part 3 and VDI 3491 Blatt 15 with possibility to adjust the dilution factor. The adjusted dilution factor is shown on a display. On the basis of this principle particles are removed from the sample according to the chosen and ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Dilution Product line

  • Model 5403 - Condensation Particle Counter (CPC)

    This universal CPC can be used in a large variety of applications due to its compact design and its integrated SMPS options. The CPC may be operated as particle counter only or in combination with one of our Differential Mobility Analysers (DMAs) as SMPS+C (Scanning Mobility Particle Sizer) to measure size distributions from 5 to 1100 nm. Through ...

    By GRIMM Aerosol Technik GmbH & Co. KG based in Ainring, GERMANY. from Nanoparticle Measurement Systems Product line

  • Markus Klotz - Model VS 100 - Particle Measuring Systems

    The dilution system VS 100 is for the defined dilution of aerosols and thus provides the possibility to conduct particle measurements even in the case of very high particle concentrations. This is done by splitting the sample volume flow into 2 partial flows whereby 99% of the actual sample volume flow is directed through a HEPA filter that ...

    By Markus Klotz GmbH based in Bad Liebenzell, GERMANY. from Particle Measuring Systems for Air and Gases Product line

  • MSP - Model M2045S - Corn Oil Aerosol Generator

    The Model 2045 is a high output aerosol generating system designed to produce polystyrene latex (PSL) aerosols of a uniform particle size at a high rate for high efficiency filter (UPLA/HEPA) testing, leak detection and in-situ cleanroom certification. The system can generate up to 7.2 x 1010 PSL spheres per minute at 0.12 μm. When this aerosol ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

  • Model M1040XP - Humidified Tandem Differential Mobility Analyzer (HTDMA)

    The Model 1040XP Humidified Tandem Differential Mobility Analyzer (HTDMA) is a multi-function aerosol instrument comprised of:  an atomizer aerosol generator, a non-radioactive electrical ionizer, a differential mobility analyzer (DMA) and a condensation particle counter (CPC) for monodisperse aerosol generation and measurement, a ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Particle Counters and Size Spectrometers Product line

  • CPC Model 3782

    The Model 3782 Water-based Condensation Particle Counter (WCPC) detects airborne particles down to 10 nm. Using single particle detection with continuous, live-time, coincidence correction, the Model 3782 measures particle concentration up to 50,000 particles/cm3 with high accuracy. Therefore, this WCPC is quite versatile and well-suited for a ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Counters & Detectors Product line

  • MSP - Model 2045 - High Output PSL Particle Generator

    The Model 2045 is a high output aerosol generating system designed to produce polystyrene latex (PSL) aerosols of a uniform particle size at a high rate for high efficiency filter (UPLA/HEPA) testing, leak detection and in-situ cleanroom certification. The system can generate up to 7.2 x 1010 PSL spheres per minute at 0.12 μm. When this aerosol ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - Aerosol Generators Product line

  • TSI - Model 379020A - Rotating Disk Thermodiluter

    Proper dilution and conditioning of exhaust emissions is essential to obtain accurate size distribution and particle number measurements. The Rotating Disk Thermodiluter 379020A is highly regarded in the field of particle emission measurement, especially for sampling, diluting and conditioning exhaust from diesel and spark-ignition engines. And, ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Aerosol Diluters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you