Only show results available in Connecticut? Ok

aerosol particle measurement (Aerosol Monitoring) equipment

  • Showcase

    Dekati - Model ELPI+ - Electrical Low Pressure Impactor

    The Dekati ELPI+ (Electrical Low Pressure Impactor) is a widely-used and well-characterized particle size spectrometer for real-time particle measurements. The ELPI+ enables measurement of real-time particle size distribution and concentration in the size range of 6 nm – 10 μm at 10 Hz sampling rate. The measurement method of the ELPI+ is ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Real-time Measurement Product line

  • Premium

    Dekati - Model Diluter DI-1000 - Aerosol Sample Diluter / Gaseous Sample Diluter

    The Dekati Diluter DI-1000 is an easy-to-operate and reliable dilution device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robust, all stainless-steel design have made it a popular choice for dilution of combustion aerosols. In high temperature applications, the Dekati ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Nano-ID - Model NPC10 - Aerosol Particle Counter

    The Nano-ID® NPC10 Aerosol Particle Counter is the first condensation particle counter specifically developed for ultra-clean manufacturing environments. It provides meaningful data fast by introducing fluid to capture even the smallest particles. This instrument combines 10 nm sensitivity with a high sample flow rate and the lowest zero ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    Dekati - Model HT-ELPI+ - High Temperature Electrical Low Pressure Impactor

    The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C aerosol samples without the need to cool ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Real-time Measurement Product line

  • Premium

    Dekati - Model DEED - Engine Exhaust Diluter

    The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle Remover). The DEED unit can be used together with any particle concentration or size distribution measurement device since the sample at the outlet of the ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Dekati - Model HT-DLPI+ - High Temperature Low Pressure Impactor

    The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size distribution. The HT-DLPI+ can be heated up to 180 °C allowing direct measurement of up to 180 °C aerosol samples without the risk of condensation or sample transformations. The impactor support ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Gravimetric Measurement Product line

  • Premium

    Dekati® - Model eDiluter™ Pro - Portable Dilution System

    Dekati eDiluter™ Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement application. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter™ Pro allows the system to ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Airmodus - Model A11 nCNC - Aerosol Particles Measurement System

    Airmodus A11 nCNC is the only commercially available measurement system for determining the size distribution of both neutral and charged 1-4 nm aerosol particles. The A11 nCNC-system, consisting of the A10 PSM and the A20 CPC, helps you to detect and monitor the very smallest aerosol particles, down to 1 nm in size. With the A11 you can observe ...

    By Airmodus Oy based in Helsinki, FINLAND.

  • Premium

    Lasair III - Model 110 - Airborne Particle Counter

    The Lasair III 110 Aerosol Particle Counter is a laser diode-based true 0.100μm particle counter with 1.00CFM flow rate that doesn’t negatively impact your environment. It provides real-time measurement of yield-impacting particles with three configurations to meet your unique application needs. With a comprehensive set of features and ...

    By Particle Measuring Systems based in Boulder, COLORADO (USA). from Airborne Particle Counters Product line

  • Premium

    Dekati - Model BOLAR™ - Bipolar Charge Analyzer

    The electrical charge carried by inhalation aerosols has been found to affect device performance and lung deposition of Dry Powder Inhalers (DPI), Metered Dose Inhalers (MDI) and nebulizers. The Dekati® ELPI® (Electrical Low Pressure Impactor, Dekati Ltd.) has been widely used to determine the net charge size distribution of inhalation ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Real-time Measurement Product line

  • Premium

    Dekati - Model DAD - Axial Diluter

    The Dekati Axial Diluter DAD is a simple and cost-effective dilution tool that can be used as a stand-alone unit or as a part of other aerosol sampling and dilution systems. The DAD is especially designed for use with Dekati Fine Particle Measurement Instruments and applications where low consumption of dilution air is a requirement. The ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Dekati - Stainless-steel Cyclone

    The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement instrument. Manufactured according to EPA standard 201A, with standard isokinetic nozzles available as accessories, the Dekati Cyclone is a highly ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Premium

    Cooper Environmental - Model QAG 825 - Multi-Metal Quantitative Aerosol Generator

    The QAG creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of the generation area to a drying chamber where they are dried to particles. The aerosol exiting the drying chamber contains known concentrations of analytes calculated from the QAG’s input parameters. The reference aerosol ...

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Markus Klotz - Model VS 100 - Particle Measuring Systems

    The dilution system VS 100 is for the defined dilution of aerosols and thus provides the possibility to conduct particle measurements even in the case of very high particle concentrations. This is done by splitting the sample volume flow into 2 partial flows whereby 99% of the actual sample volume flow is directed through a HEPA filter that ...

    By Markus Klotz GmbH based in Bad Liebenzell, GERMANY. from Particle Measuring Systems for Air and Gases Product line

  • Model PAS 2200CE - Photoelectric Aerosol Sensor (PAS)

    The PAS 2000 works on the following principles: Using an Excimer lamp the aerosol flow is exposed to UV radiation. The Excimer lamp offers a high intensity, narrowband source of UV radiation. The wavelength of the light is chosen such that only the carbon aerosols are ionized, while gas molecules and non-carbon aerosols remain neutral. The carbon ...

    By EcoChem Analytics based in League City, TEXAS (USA). from Particles Product line

  • Aerosol Particle Size Spectrometer - Model LAP 322 - Particle Size and Concentration Measurement

    The Aerosol Particle Size Spectrometer LAP 322 provides the determination of aerosol particle size distributions (0.2-40µm) and particle concentrations. It  is based on optical single-particle measurements by means of 90° scattered light measurement. By dint of high number of provided particle size classes a high particle sizing resolution can be ...

    By Topas GmbH based in Dresden, GERMANY. from Particle Size Measurement Product line

  • Model PAS 2000 - Photoelectric Aerosol Sensor (PAS)

    Since 1991, EcoChem has pioneered the use of the Photoelectric Aerosol Sensor (PAS) for real-time measurement of Carbon aerosols. Previous versions of the PAS monitor (PAS 1000i, 1000e and 1002i ) are widely used by regulatory, research and industrial organizations. Incorporating customer feedback and state-of-the-art advances in measurement ...

    By EcoChem Analytics based in League City, TEXAS (USA). from Particles Product line

  • Electrical Aerosol Detector Model 3070A

    The Electrical Aerosol Detector (EAD) measures a key aerosol parameter believed to indicate the effective surface area of particles that can be deposited in the lung. This aerosol detector is a unique complement to our line of CPCs. Like a CPC, the EAD measures particle concentration as a function of time. But it also measures a parameter called ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Counters & Detectors Product line

  • Aerosol Electrometer Model 3068B

    The Aerosol Electrometer provides accurate measurements of electrical current and flow rate. It measures total net charge on aerosol particles from 0.002 to 5 µm. When paired with a TSI Electrostatic Classifier, the Aerosol Electrometer measures the number concentration of monodisperse aerosol. This configuration is used primarily for calibrating ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Counters & Detectors Product line

  • Wide Range Aerosol Spectrometer

    Gravimetric measurements have shown that the entire part of the mass of fine dust below 0.5 µm makes up less than 1%. But if the particles are counted, 80% below the size range of 0.5µm. It is not obvious if the particle number or the particle mass has a greater effect on the human health. Therefore it would be useful to have a device ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you