Only show results available in Virginia? Ok

aerosol sampling Equipment

  • Showcase

    AeroFid - Model 200 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Aerosol Can Leak Detector Product line

  • Premium

    Aerosol-resistant Filter Tips

    Hydrophobic Filter Eliminates Contamination. Rainin's aerosol-resistant filters are made from pure virgin molded polyethylene. Machine-loaded, these tips are completely untouched during manufacturing and packaging, and are certified free of RNase, DNase, DNA, and pyrogen contamination. In addition, all filter tips are presterilised by ...

  • Premium

    Rainin - Aerosol-resistant Filter Tips

    Hydrophobic Filter Eliminates Contamination. Rainin's aerosol-resistant filters are made from pure virgin molded polyethylene. Machine-loaded, these tips are completely untouched during manufacturing and packaging, and are certified free of RNase, DNase, DNA, and pyrogen contamination. In addition, all filter tips are presterilised by ...

  • Premium

    Sterlitech Polypropylene In-line And Aerosol Holders

    Compatible with a wide range of chemicals and temperatures. Exterior locking ring design allows the unit to be assembled quickly and efficiently without tearing the membrane. Applications: ultraclean and sterilize liquids, aseptic sampling of liquids or gases at point-of-use, environmental air sampling (PPO 47 - Open faced - does not have ...

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Pressure and Vacuum Filtration Product line

  • Aerosol Neutralizer - Model EAN 581 - Bipolar Electrostatic Discharger

    The mechanical interaction of particles, especially solid ones, may cause undesirable levels of electrostatic charge. Test dusts must be generated with a high degree of reproducibility for instance when evaluating aerosol separation techniques such as cyclones, filters or impactors. Comparable results can only be obtained at controlled and similar ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Conditioning and Sampling Product line

  • Premium

    Model JES-301E1SVZ - Gas Sampling Probe

    Applications: The gas sampling probe JES 301E1SVZ is for continuous  use with  extractive  sampling  systems  even where  the sample  contains  dust  and  aerosols  in Zone 1. The JES 301E1SVZ is available in several versions which may be custom configured to meet user's specific requirements. ...

    By JCT Analysentechnik GmbH based in Wr. Neustadt, AUSTRIA. from Ex-approved Product line

  • Premium

    AeroFid - Model 60 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-60 tests up to 80 cans per minute. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Aerosol Can Leak Detector Product line

  • Premium

    AeroFid - Model 100 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-100 tests up to 120 cans per minute at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Aerosol Can Leak Detector Product line

  • Premium

    Coriolis Recon - Military Bio-Aerosol Sampler

    Coriolis Recon is a bio-aerosol sampler, dedicated to CBRN Recon teams or first responders, with quick deployment in case of bio-threat suspicion. It is efficient, portable and has been ruggedized for unfamiliar environment. Coriolis Recon offers flexibility with a choice of 2 operating modes: Autonomous sampling: triggered by the operator wearing ...

    By Bertin Technologies based in Montigny - Le - Bretonneux, FRANCE. from Control of Bacteriological and Chemical Threats Product line

  • Aerosol Diluter - Model DDS 560 - Dynamic Dilution System

    The Dynamic Dilution System DDS 560 is designed to definitely and reproducibly dilute aerosols according to EN ISO 14644 part 3 and VDI 3491 Blatt 15 with possibility to adjust the dilution factor. The adjusted dilution factor is shown on a display. On the basis of this principle particles are removed from the sample according to the chosen and ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Dilution Product line

  • Dekati - Thermodenuder

    Dekati® Thermodenuder is used to remove volatile and semivolatile compounds from aerosol sample in order to eliminate unwanted sample transformations e.g. in engine exhaust measurements. The volatile and semivolatile compounds are vaporized when they enter the instrument and then adsorbed into active charcoal which has been designed to the form of ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Diffusion Dryer - Model DDU 570 - Diffusion Dryer

    The Diffusion Dryer DDU 570 has been developed mainly as additional equipment for the Aerosol Generators produced by Topas GmbH. The diffusion dryer consists of an Acryl tube with 2 caps on its ends and tube connectors. In the operation status the dryer is filled with Silica gel. The aerosol to be dried is streaming through 3 screen pipes which ...

    By Topas GmbH based in Dresden, GERMANY. from Aerosol Conditioning and Sampling Product line

  • Dekati - Model DAD - Axial Diluter

    Dekati® Axial Diluter DAD-100 is a simple and cost-effective dilution tool for any dilution task. Especially designed for use with Dekati® Instruments, the DAD-100 is very simple to install into any sampling or measurement system. All-stainless steel design makes it also possible to heat the diluter up to 500°C.

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Dekati - Model Diluter - Dekati® Diluter

    Dekati® Diluter DI-1000 is a low-cost, simple and easy-to-operate device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robustness of the all stainless-steel design have made it a widely renowned choice for dilution of combustion aerosols.The nominal dilution factor for a ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Aerosol Particle Size Spectrometer - Model LAP 322 - Particle Size and Concentration Measurement

    The Aerosol Particle Size Spectrometer LAP 322 provides the determination of aerosol particle size distributions (0.2-40µm) and particle concentrations. It  is based on optical single-particle measurements by means of 90° scattered light measurement. By dint of high number of provided particle size classes a high particle sizing resolution can be ...

    By Topas GmbH based in Dresden, GERMANY. from Particle Size Measurement Product line

  • Dekati - Model FPS - Fine Particle Sampler

    Dekati® Fine Particle Sampler is a guaranteed solution for diluting and conditioning aerosol and gaseous samples for measurement instruments. This versatile dilution system allows dilution factor adjustment between 1:20 and 1:200 and first stage dilution temperature settings between 0 and 350 °C. Temperatures and pressures in different parts of ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Dekati - Model DEED - Engine Exhaust Diluter

    Dekati® Engine Exhaust Diluter DEED is a fully EURO5b/6 conform engine exhaust conditioning system. In contrast to multi-stage dilution systems in general, DEED is a simple, easy-to-use system that conditions the sample precisely and in a repeatable manner every time. The DEED fulfils all requirements and recommendations set in EURO5b/6 standard ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Dekati - Cyclone

    Dekati® Cyclone is an all stainless steel cyclone for removal of large particles from a sample stream. Manufactured according to EPA standard 201A (EPA standard 201a.pdf), with standard isokinetic nozzles available as accessories, the Dekati® Cyclone is a highly durable addition to any sampling line where removal of large particles is needed. The ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Aerosol Sample Conditioning Product line

  • Fast Aerosol Spectrometer - TR-DMPS

    To measure aerosol size distributions, this instrument system performs three operational functions: charging, size classification, and detection. Particle charging is accomplished by exposing the aerosol sample to intense monochromatic UV light which results in photoelectric ejection of electrons from particle surfaces. The charged aerosol then ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • Welas - Model digital 2000 - Light-Scattering Spectrometer System

    Aerosol spectrometer with an aerosol sensor, highest particle size resolution, measuring range from 200 nm to 40 µm. The welas digital 2000 is a flexible, powerful and economical light-scattering spectrometer system, which determines particle concentration and size precisely and reliably. The welas digital 2000 is characterized by its ...

    By Palas GmbH based in Karlsruhe, GERMANY. from Aerosol Spectrometers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you