Only show results available in Virginia? Ok

Submicron Aerosol (Aerosol Monitoring) equipment

  • Filter-Check SubMicron Aerosol Spectrometer/Filter Efficiency Monitor

    The requirement for filter efficiency measurement (contamination control) has been outlined for years by ASHRAE 52.1 as a classical gravimetric method. Since the concentration of smaller particulate in ambient air is dramatically increasing, new methods need to be developed for air cleaning devices to study the removal efficiency by particle size. ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • Fiberwind Candels Mist Eliminators

    FIBERWIND type mist eliminators of AWS are specifically made to remove mainly submicron liquid or soluble solid particles from an air or gas stream. They are similar to mesh pad mist eliminators except that the filaments are extremely fine fibers, randomly but very closely spaced.

    By AWS Corporation Srl based in Cologno al Serio (BG), ITALY. from Aerosol, Spray and Mist Separation Product line

  • NUCON - Model AGT - Aerosol Generator

    The NUCON Model AGT is a high-output portable thermal aerosol (DOP or PAO) generator. It can provide up to 241 mL/min of submicron PAO, or 121 mL/min of submicron DOP, aerosol. System pressure indicator and all operational controls are on the front panel. Liquid to gas phase conversion takes place in a continuous stainless steel coil cast in an ...

    By NUCON International, Inc. based in Columbus, OHIO (USA). from Quality Instruments Product line

  • Model 6D - Self-Contained Laskin-Nozzle Aerosol Generator

    The 6D is a small, light, and rugged portable, self-contained Laskin-Nozzle aerosol generator. It is ideal for testing a wide variety of filter systems with airflows up to 2,000 cfm by generating a poly-dispersed, sub-micron aerosol. Applications include workstations, negative- pressure filtration units, biological safety cabinets, ceiling modules ...

    By Air Techniques International (ATI) based in Hertfordshire, UNITED KINGDOM. from Aerosol Generators Product line

  • Aerodyne - Aerosol Mass Spectrometer System (AMS)

    The Aerodyne aerosol mass spectrometer (AMS) is the only currently available instrument capable of providing quantitative size and chemical mass loading information in real-time for non-refractory sub-micron aerosol particles. The AMS couples size-resolved particle sampling and mass spectrometric techniques into a single real-time measurement ...

    By Aerodyne Research, Inc. based in Billerica, MASSACHUSETTS (USA). from Aerosol Mass Spectrometers Product line

  • Aerodyne - Aerosol Chemical Speciation Monitor (ACSM)

    The Aerodyne Aerosol Chemical Speciation Monitor (ACSM) measures quantitative particle mass loading and chemical composition in real-time for non-refractory sub-micron aerosol particles.   Smaller, lower cost and more robust than our AMS instruments, the ACSM is designed for long-term unattended deployment and routine monitoring ...

    By Aerodyne Research, Inc. based in Billerica, MASSACHUSETTS (USA). from Aerosol Mass Spectrometers Product line

  • Kimre - Model Aerosep - Multi-Stage Aerosol Separation Systems

    Aerosols are suspended liquid or solid particles ranging in diameter from the submicron range to the 10 to 20µm size. Kimre offers the AEROSEP Multi-Stage Aerosol Separation System to collect submicron particulates which are hygroscopic using the principles of condensation scrubbing. Aerosols as small as 0.2 microns in diameter pass through ...

    By Kimre, Inc. based in Homestead, FLORIDA (USA).

  • Particle and Aerosol Separators

    Aerosols are solid or liquid suspended particles with diameters in size of 10 to 20 microns (submicron range). PLASTOQUIMICA offers a new multistage ordered packing system for the separation of aerosols, being able to achieve a degree of separation down to 0.2 microns. One of its main advantages is that we provide a custom solution for each ...

  • S&M - Scientific Condensation Aerosol Generator

    The Industry Standard just got better.>50% more efficiency then any other generator.GO GREEN-- CO2 Gas bottles and OIL last longer.Unique Nebuliser© provides unrivalled STABLE upstream concentrations.Custom Built Heavy-Duty case- Total Weight 7.5Kg.

    By S & M Electronics Limited based in Pinner, Middlesex, UNITED KINGDOM.

  • Airmodus - Model A11 nCNC - Aerosol Particles Measurement System

    Airmodus A11 nCNC is the only commercially available measurement system for determining the size distribution of both neutral and charged 1-4 nm aerosol particles. The A11 nCNC-system, consisting of the A10 PSM and the A20 CPC, helps you to detect and monitor the very smallest aerosol particles, down to 1 nm in size. With the A11 you can observe ...

    By Airmodus Oy based in Helsinki, FINLAND.

  • S&M - Gas-Bottle Scientific Condensation Aerosol Generator

    Internal Gas-Bottle and Regulator.Ideal for ultimate portability.Both S&M COMPACT & SCIENTIFIC conform to ISO14644, BS 5295 etc. for testing of HEPA Filters.Military grade components.Used worldwide in Cleanrooms, Aerospace, Military, Asbestos industry.

    By S & M Electronics Limited based in Pinner, Middlesex, UNITED KINGDOM.

  • ECharge - Electrostatic Precipitator

    Features a Highly Efficient Design for Maximum Process or Indoor Air Pollution Control: The economical Bionomic ECharge Electrostatic Precipitator is able to achieve extremely high removal efficiency on small micron and submicron particulate to easily meet PM 2.5 environmental regulations. Opacity problems associated with smoke-type submicron ...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA). from Wet/Dry Electrostatic Precipitator Product line

  • Industrial Condensing Precipitators System

    Precipitation is recommended for collection of liquid pollutants, particularly when they exist as submicron 'mists' , 'fogs' , or thermal smokes, and few solids must be collected. Thiel precipitators excel at collection of the submicron pollutants that cause visible opacity. They utilize low voltage two-stage Penny type designs, and operate ...

    By Thiel Air Technologies based in Hamilton, OHIO (USA).

  • CPI - Oxidation Filtration Systems

    Catalytic Products International, Inc. has developed the SENTINEL Oxidation Filtration System as an efficient and cost effect means for particulate and aerosol elimination from a variety of industrial exhaust streams.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA). from Other Product line

  • RODOS - Model L - Dry Dispersion Unit

    Powerful dry dispersion in the free aerosol jet for laser diffraction and dynamic image analysis. RODOS is the original by the inventor of dry dispersion. With this breakthrough innovation, Sympatec has opened up dry applications to particle measurement technology – as early as 1982. Since then, it has been possible to dry measure powders, ...

    By Sympatec GmbH based in Clausthal-Zellerfeld, GERMANY. from Dispersing Units Product line

  • Cartridges for Gas Filtration

    Fluidel s.r.l. can supply cartridges for gas filters, to eliminate solid particles and liquids from main gas stream.

    By Fluidel S.r.l. based in Trezzano S/N, ITALY. from Filtration & Separation Element Product line

  • SASS - Model 3100 - Dry Air Sampler

    The SASS 3100 Smart Air Sampler System is a compact, rugged microprocessor-controlled portable air sampler designed for use with state-of-the-art electret filter media. It is highly suited to the collection of biological and radioactive aerosols. In independent tests performed by third parties, it has out-performed all competitors in terms of ...

    By Research International, Inc. based in Monroe, WASHINGTON (USA). from Collection Tools Product line

  • Brink FAVS - Fuming Acid Vent System

    Safe and efficient collection of Oleum, Liquid SO3 and Chlorosulfonic Acid mists. The Brink® Fuming Acid Vent System by MECS® Inc. is an engineered, skid mounted sub micron mist removal device that is designed to control problems created by fuming acids that are vented to atmosphere. Typically the application is related to these fuming ...

    By MECS, Inc based in Chesterfield, MISSOURI (USA). from Brink Fiber Bed Mist Eliminators Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you