Only show results in Texas? Ok

Aerosols equipment for Air and Climate

  • Premium

    Citra Gloss - All Surface Duster & Polish Spray - 12 Cans/Case

    New generation aerosol for cleaning, polishing, and protecting many surfaces. Quick breaking foam provides for easy wipe-out to restore luster and enhance beauty. Contains no wax, eliminating surface build-up. Effective on all hard surfaces: laminate, wood, baked enamel, porcelain, etc. Leaves area with fresh citrus aroma.

  • Premium

    Adhesive Aerosol Spray - 12 Cans/Case

    General Purpose Pressure Sensitive Adhesive is recommended for decorative laminate to particleboard and MDF (medium-density fiberboard) substrates, metals and plywood. This product has an adjustable tip offering the user a webbing type spray pattern that is water white and does not contain Methylene Chloride. Its unique formula prevents soak-in of ...

    By Interstate Products Inc based in Sarasota, FLORIDA (USA). from Adhesive Aerosol Spray - 12 Cans/Case Product line

  • Double Pocket Vanes Packs

    Pocket vane technology consists of closely spaced metal plates that form a zig-zag flow path. Unique to these pocket vanes are internal drain channels in a 'hollow vane' design that allow collected liquids be shielded from the gas flow and drain without the opportunity for re-entrainment. Gas flow can be either vertically or horizontally.

    By AWS Corporation Srl based in Cologno al Serio (BG), ITALY. from Double Pocket Vanes Packs Product line

  • MSP - Model M2045S - Corn Oil Aerosol Generator

    The Model 2045 is a high output aerosol generating system designed to produce polystyrene latex (PSL) aerosols of a uniform particle size at a high rate for high efficiency filter (UPLA/HEPA) testing, leak detection and in-situ cleanroom certification. The system can generate up to 7.2 x 1010 PSL spheres per minute at 0.12 μm. When this aerosol ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Corn Oil Aerosol Generator Product line

  • Model AMS02 - Mobile Aerosol Monitoring System

    This is a special version of the AMS series of BITT Technology. The AMS02 units are generally characterized as multi-detector equipment with an automatic sample changer. The AMS02M-2008 is having one or two radiation detectors but manual sample changing. By using the one detector system a PIPS detector is always inserted for the alpha and the ...

    By Gihmm GmbH based in Spillern, AUSTRIA. from Mobile Aerosol Monitoring System Product line

  • Diffusion Dryer

    The Diffusion Dryer is an accessory that is used commonly to dry and remove water vapor from aerosol generated by our Atomizers. The dryer includes a removable extractor for collecting large water droplets. Desiccant surrounding the aerosol flow path removes excess moisture by diffusional capture. Because the aerosol never comes in contact with ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Diffusion Dryer Product line

  • Small-Scale Powder Disperser

    The Small-Scale Powder Disperser (SSPD) produces small quantities of powder by lifting particles from a turntable using a venturi aspirator. The turntable rotates at variable speeds to control aerosol concentrations. Shear forces created in the SSPD are sufficient to deagglomerate most dry particles in the range from 0.5 to 50 µm.

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Small-Scale Powder Disperser Product line

  • Model M1520 - Flow-Focusing Monodisperse Aerosol Generator (FMAG)

    The Model 1520 is an aerosol generator for producing monodisperse droplets and aerosol particles. The instrument uses the flow focusing effect to reduce the size of a liquid jet and the resulting size of droplets and reduce the aerosol particle size to 0.7 to 15 µm in diameter. The instrument is referred to as the Flow-Focusing Monodisperse ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Flow-Focusing Monodisperse Aerosol Generator (FMAG) Product line

  • Model Compact - Thermal Aerosol Generator

    TEC Services is proud to become the only US and Canadian distributor of this revolutionary thermal aerosol generator manufactured by S & M Electronics Limited. The Compact thermal aerosol generator is designed especially for testing of air handler units and/or HEPA filter systems from 5,300 to 53,000 cfm.

    By TEC Services, Inc. based in New Oxford, PENNSYLVANIA (USA).

  • Model 5C - Thermal Aerosol Generator

    The 5C thermal aerosol generator is versatile and portable. It is ideal for certification of large applications and those requiring a wide range of aerosol concentrations such as in large cleanroom plenums, particularly where compressed air is not available. The 5C provides a high capacity solution for demanding industries such as those of ...

    By Air Techniques International (ATI) based in Hertfordshire, UNITED KINGDOM. from Thermal Aerosol Generator Product line

  • Vibrating Orifice Aerosol Generator

    The Vibrating Orifice Aerosol Generator (VOAG) is a highly accurate source of monodisperse particles in the range from 1 to 200 µm (initial droplet diameter measures 20 to 400 µm). Using a variety of solutes and solvents, this unique aerosol generator creates solid or liquid particles that are uniform in size, shape, density, and surface ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Vibrating Orifice Aerosol Generator Product line

  • Wide Range Aerosol Spectrometer

    Gravimetric measurements have shown that the entire part of the mass of fine dust below 0.5 µm makes up less than 1%. But if the particles are counted, 80% below the size range of 0.5µm. It is not obvious if the particle number or the particle mass has a greater effect on the human health. Therefore it would be useful to have a device ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • contec - Borosilicate Microglass Fiber for Particle and Coalescence Filtration

    Application: To separate dirt and aerosols such as oil and condensate from the gas flow From simple pressure loss to corrosive gases and hot gas application Filtration of solvents and other liquids.

  • X-Tinguish - Model FST - Handheld Aerosol Generator

    The new X-Tinguish FST is the world's most advanced aerosol firefighting tool. Able to remove over 900° F of heat in thirty seconds, the FST is our best aerosol generator yet.With its cutting-edge non-pyrotechnical pull pin, the FST uses an electrical system to generate aerosol in places unsafe for flames. Extensive research in the field of ...

    By Flame Guard USA based in Lake Barrington, ILLINOIS (USA).

  • Testo REXS - High Mass Soot Generator

    testo REXS is installed in a rolling 19-inch rack. Easy to learn how to use, thanks to its simple design and clear control elements. Check and monitor control parameters using the indicator lights, display and software.

    By Testo SE & Co. KGaA based in Lenzkirch, GERMANY.

  • Plastoquimica - Particle and Aerosol Separators

    Aerosols are solid or liquid suspended particles with diameters in size of 10 to 20 microns (submicron range). PLASTOQUIMICA offers a new multistage ordered packing system for the separation of aerosols, being able to achieve a degree of separation down to 0.2 microns. One of its main advantages is that we provide a custom solution for each ...

    By Plastoquimica, S.L based in Sant Joan Despí, SPAIN. from Particle and Aerosol Separators Product line

  • Model TDA-4 - Aerosol Generators

    The TDA-4 series family of Laskin-Nozzle aerosol generators are durable, portable, and reliable. Designed for testing filter systems ranging from small glove boxes to large Cleanroom plenums, ATI Laskin Nozzle generators provide the ideal solution for creating a poly-dispersed, sub micron aerosol to certify and qualify in-situ filter systems. End ...

    By Air Techniques International (ATI) based in Hertfordshire, UNITED KINGDOM. from Aerosol Generators Product line

  • Filter-Check SubMicron Aerosol Spectrometer/Filter Efficiency Monitor

    The requirement for filter efficiency measurement (contamination control) has been outlined for years by ASHRAE 52.1 as a classical gravimetric method. Since the concentration of smaller particulate in ambient air is dramatically increasing, new methods need to be developed for air cleaning devices to study the removal efficiency by particle size. ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • Large-Particle Aerosol Generator

    Designed primarily for filter testing, the Large-Particle Aerosol Generator produces highly concentrated aerosol in a broad particle-size range, from 0.1 to 10 µm in diameter. It produces potassium chloride (KCl) or other aerosols, and it meets the requirements of the proposed SAE J1669, ISO/CD 11155-1, and ASHRAE 52.2 test codes. This aerosol ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Large-Particle Aerosol Generator Product line

  • Aerosol Nebulizer - Model ATM 210, 210/H - Atomizer Aerosol Generator

    The ATM 210 Liquid Aerosol Generator produces aerosols with known properties in accordance with guideline VDI 3491. This special model facilitates generation of aerosol into pressurised vessels (up to 10bar). Its design ensures a highly stable particle size distribution and concentration with high reproducibility and a high aerosol output. The ...

    By Topas GmbH based in Dresden, GERMANY. from Atomizer Aerosol Generator Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you