Aerosols Equipment available in Djibouti

Available in Djibouti| Near Djibouti
204 Results found

We couldn't find any results in Djibouti

Here is a list of results available in Djibouti

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Aerosols ×

  • Available in: Africa ×

  • Available in: Djibouti ×

Model 1.109 - Portable Aerosol Spectrometer

by Grimm Technologies     based in Douglasville, GEORGIA (US) (USA)

Grimm is a leading engineering technology provider undertaking research and design and production of different aerosol spectrometers for research as well as indoor and outdoor air quality monitoring. This powerful instrument gives the user the ability to continuously measure in real time particles in 31 different size channels and present the data ...

Filter-Check SubMicron Aerosol Spectrometer/Filter Efficiency Monitor

by Grimm Technologies     based in Douglasville, GEORGIA (US) (USA)

The requirement for filter efficiency measurement (contamination control) has been outlined for years by ASHRAE 52.1 as a classical gravimetric method. Since the concentration of smaller particulate in ambient air is dramatically increasing, new methods need to be developed for air cleaning devices to study the removal efficiency by particle size. ...

TSI - Model 3079 - Aerosol Generator

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

Aerosol Generator 3079 is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.0 to 4.2 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected by a hood, making this ...

Testo REXS - High Mass Soot Generator

by Testo SE & Co. KGaA     based in Lenzkirch, GERMANY

REXS: Reproducible EXhaust Simulator – generates nano-sized soot particles which are very similar to diesel soot. But unlike soot from a diesel engine, REXS soot is consistent time after time. Going this artificial route can reduce cost of ownership by as much as 80% compared to the traditional method of using exhaust from a real combustion ...

Dekati - Thermodenuder

by Dekati Ltd.     based in Kangasala, FINLAND

Dekati® Thermodenuder is used to remove volatile and semivolatile compounds from aerosol sample in order to eliminate unwanted sample transformations e.g. in engine exhaust measurements. The volatile and semivolatile compounds are vaporized when they enter the instrument and then adsorbed into active charcoal which has been designed to the form of ...

Aurora - Model 1000 - Integrating Nephelometer

by American Ecotech LLC     based in Warren, RHODE ISLAND (USA)

User friendly, easy to use and maintain, the Aurora 1000 lowers the cost of ownership for aerosol light scattering, visibility and particulate monitoring instrumentation. The Aurora 1000 uses a single wavelength for scattering coefficient visibility measurements at one of three user specified wavelengths. Ecotech, through collaboration with ...

Kimre - Model Aerosep - Multi-Stage Aerosol Separation Systems

by Kimre, Inc.     based in Homestead, FLORIDA (USA)

Aerosols are suspended liquid or solid particles ranging in diameter from the submicron range to the 10 to 20µm size. Kimre offers the AEROSEP Multi-Stage Aerosol Separation System to collect submicron particulates which are hygroscopic using the principles of condensation scrubbing. Aerosols as small as 0.2 microns in diameter pass through ...

TSI - Model 3079A - Aerosol Generators

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

Aerosol Generator 3079A is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.2 to 5.0 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected by a hood, making this ...

OC-EC Lab - Aerosol Analyzer

by Sunset Laboratory     based in Tigard, OREGON (USA)

The Lab OC-EC Aerosol Analyzer is the industry standard for environmental and workplace monitoring. This instrument uses a proven thermal-optical method to analyze for OC-EC aerosols collected on quartz filters. It is the basis for NIOSH Method 5040 and is fully compliant with the IMPROVE protocol. It features a new and improved microcontroller ...

Ecotech - Model ACS1000 - Aerosol Conditioning System

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Studying the hygroscopic properties of aerosol particles offers insights into their effect on the earth’s radiative balance. By simultaneously exposing aerosol particles to different relative humidity, Ecotech’s Aerosol Conditioning System (ACS 1000) enables the effect of water uptake on the particles’ physical properties to be ...

AeroFid - Model 200 - Automatic Micro Leak Detector for Filled Aerosol Cans

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one ...

Aerosol Precipitators

by Trema Verfahrenstechnik GmbH     based in Kemnath, GERMANY

Cost-effective aerosol separation (

Ecotech - Model Aurora 4000 - Polar Nephelometer

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Aurora 4000 polar nephelometer is the only commercially available polar nephelometer in the world. The polar nephelometer goes beyond simple integrated nephelometers and allows much more detailed measurements. The Aurora 4000 polar nephelometer uses a programmable backscatter shutter which allows the user to set up to 17 customisable angles ...

Palas - Model BEG 1000 - Low-Concentration Test Aerosol Generator

by Palas GmbH     based in Karlsruhe, GERMANY

Generation of test aerosols from powder, dust, pollen, etc.; mass flow approx. 8 g/h to 6 kg/h. Many applications in research, development, and quality assurance require solid particle aerosols from powders and dusts. For over 20 years, the BEG 1000 has been successfully used for the reliable dispersion of non-cohesive powders, e.g. to generate ...

Promo - Model 2000 - Light-Scattering Aerosol Spectrometer System

by Palas GmbH     based in Karlsruhe, GERMANY

Promo 2000 is a light-scattering aerosol spectrometer system for particle size analysis and concentration determination that can be equipped with all welas sensors.

TSI - Model 3076 - Aerosol Generator

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

Aerosol Generator Model 3076 is a Collison-type atomizer that generates aerosols of constant particle size in concentrations over 107 particles/cm3. Its nominal aerosol flow rate is 3.0 L/min. Stainless-steel components make it suitable for the specialized applications listed below, in additon to basic aerosol research.

MSP - Model M1500 - Aerosol Generator and Monitor (AGM)

by MSP Corporation     based in Shoreview, MINNESOTA (USA)

The Model 1500 Aerosol Generator and Monitor (AGM) is a multi-function aerosol instrument comprised of an atomizer aerosol generator, a differential mobility analyzer (DMA) and a condensation particle counter (CPC) for aerosol generation and measurement.

Palas - Model RBG 1000 - Low-Concentration Test Aerosol Generator

by Palas GmbH     based in Karlsruhe, GERMANY

Low-concentration solid particle aerosols produced from powders are required for many applications in research, development, and quality assurance and for the calibration of particle measurement devices.

Promo - Model 3000 - Light-Scattering Aerosol Spectrometer System

by Palas GmbH     based in Karlsruhe, GERMANY

The Promo is a light-scattering aerosol spectrometer system for particle size analysis and concentration determination that can be equipped with all welas sensors.

Cooper Environmental - Model QAG - Quantitative Aerosol Generator

by Cooper Environmental     based in Beaverton, OREGON (USA)

The Quantitative Aerosol Generator (QAG) creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of generation area to a drying chamber where they are dried to salt particles. Depending on the application for the salt particles the size can be varied to a number mean between 0.1 and 2 µm in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you