Aerosols Equipment For Air And Climate Available In Luxembourg
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Portable particle counter for cleanroom certification and cleanroom monitoring. The Lasair® Pro portable particle counter supports a complete contamination control solution including cleanroom certification and clean area monitoring while meeting global requirements for data integrity. Designed for intuitive and reliable aerosol particle counting, this newest addition to the PMS fleet ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Econoair Plus L-12P personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
This convenient aerosol windshield deicer removes snow, ice and frost from windshields. Windshield Deicer aerosol instantly lowers the freezing point of water to quickly melt away snow and ice from a variety of automobile surfaces including mirrors, locks, and door handles. This product can also be used as a defogger for inside ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Set of 2 blocks, Set of 5 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
ELPI+ unit with impactor and charger unit, 2 m of sample hose (IPR-212), vacuum hose (IA-322B), aluminium foils (CF-300), greased aluminium foils (CFG- 225), Apiezon-L grease (AG-10), substrate positioning tool (N1591), spare charger needle (N1281), RS-232 cable with USB adapter, connectors, power supply with mains cable, user manuals and calibration ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
A portable, easy to use, thick black aerosol coating that seals water leaks and fills cracks and voids on most roofing surfaces. It is an extremely durable sealer and coating that will not sag or drip in summer heat or crack or peel in winter cold. It sprays as a liquid, flows into low spots, cracks and crevices then dries to a thick, black rubberized coating. ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Whether magnetic particle separation or novel SmartExtraction technology – the InnnuPure C16 touch significantly increases efficiency in nucleic acid extraction. Whatever your extraction method, the InnuPure C16 touch not only delivers higher yields and highly reproducible results but also helps you find the ideal combination of kit, protocol, and ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Quantitative Aerosol Generator (QAG) creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of generation area to a drying chamber where they are dried to salt particles. Depending on the application for the salt particles the size can be varied to a number mean between 0.1 and 2 µm in diameter. The aerosol exiting the drying chamber ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
The atmospheric wind field is the main driving force for atmospheric circulation, material transport and weather phenomena of various scales. In the field of aviation, wind power and meteorological and environmental protection, it is very important to obtain accurate atmospheric wind fields. Coherent wind lidar is a non-contact measurement, non-interfering target motion, high spatial and temporal ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III Particle Counter is designed for cleanrooms with your unique needs in mind. It sets the standard for portable aerosol particle counters in highly regulated environments, so you can make sure your environment is clean. It can be used for both remote and mobile routine cleanroom monitoring. We know the requirements and we’ve done the calculations for you; cleanroom ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
In order to meet high requirements for flexibility, capability, operational reliability, operating costs and the environmental demands of minimal noise and aerosol generation, Landustrie developed the Landox channel aeration ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Slip Resistant Coating - Good Grip Aerosol - Clear 6 Ea 20 oz. Cans/Case - Hard, texturized, epoxy resin coating that quickly cures to a slip resistant rough grit surface. Aids in the reduction of slip and fall accidents. Unique aerosol contains special synthetic grit with no sharp edges. Available in several colors. One application lasts for months depending on traffic. For use in areas where ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Lasair III 110 is a laser diode-based true 0.1 μm particle counter with 1.0 CFM flow rate. With a comprehensive set of features and unequalled accuracy, the Lasair III 110 offers reduced operating costs and the reliability and longevity to support its three-year laser ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
EMFAB filter, TX40 (100 filters), Ø47 mm. Incl. 100 filters for gravimetric ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Advanced Aerosol Manifold for sequentially monitoring aerosol contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II Aerosol Manifold from Particle Measuring Systems offers advanced features for sequentially monitoring contamination at multiple cleanroom locations with a fixed airborne particle counter. The AM II aerosol manifold is ideal for trend ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Incl. pressure regulator and gauge, particle filters to remove solid and oil particles from the dilution air and a silica gel dryer or molecular sieve for water removal. Extra molecular sieve 1 kg for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you