Aerosols Equipment For Air And Climate
-
ShowcaseManufactured by Particle Measuring Systems (PMS)based in USA
Portable particle counter for cleanroom certification and cleanroom monitoring. The Lasair® Pro portable particle counter supports a complete contamination control solution including cleanroom certification and clean area monitoring while meeting global requirements for data integrity. Designed for intuitive and reliable aerosol particle counting, this newest addition to the PMS fleet ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PTFE Filter Membranes are produced of pure PTFE resins. They withstand the most severely corrosive conditions at temperatures as high as 500°F (260°C). The membrane is hydrophobic and maintains its strength in both wet and dry environments. PTFE filter media provides durability for hostile acid aerosol monitoring. 1.0 µm pore size ...
-
PremiumManufactured by ARC Filtration System Ltdbased in CHINA
MCE flat membranes are made from a mixture of cellulose nitrate and cellulose acetate, which can retain microorganisms and particles from fluids. They are widely used in aqueous solution sterile filtration, aqueous solution clarification, particle collection and analysis, microbial detection, air monitoring, mobile phase (aqueous phase) filtration for HPLC, ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
EMFAB filter, TX40 (100 filters), Ø47 mm. Incl. 100 filters for gravimetric ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Slip Resistant Coating - Good Grip Aerosol - Clear 6 Ea 20 oz. Cans/Case - Hard, texturized, epoxy resin coating that quickly cures to a slip resistant rough grit surface. Aids in the reduction of slip and fall accidents. Unique aerosol contains special synthetic grit with no sharp edges. Available in several colors. One application lasts for months depending on traffic. For use in areas where ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Non-acid, non-abrasive, foaming aerosol tarnish remover and polish. Restores the original luster to brass, copper, stainless steel, bronze, chrome, and aluminum. Leaves a residual film that helps prevent re-tarnishing. Fortified with natural citrus oils for increased cleaning power, surface brilliance, and a fresh citrus ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati Oxidation Flow Reactor, DOFR, is a unique, all-in-one solution combining sample conditioning and an oxidation flow reactor for secondary aerosol (SA) formation ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Incl. pressure regulator and gauge, particle filters to remove solid and oil particles from the dilution air and a silica gel dryer or molecular sieve for water removal. Extra molecular sieve 1 kg for ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Nonslip Coating - Good Grip Aerosol - Yellow 6 Ea 20 oz. Cans/Case - Hard, texturized, epoxy resin coating that quickly cures to a slip resistant rough grit surface. Aids in the reduction of slip and fall accidents. Unique aerosol contains special synthetic grit with no sharp edges. Available in several colors. One application lasts for months depending on traffic. For use in areas where water ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Concept Smoke Systems offer a wide range of heavy duty transit cases to suit all of our smoke machines and accessories. These cases can be are; airtight, crushproof, shockproof, watertight, corrosion proof, sand & dust proof, waterproof, designed for Military Applications and NATO Cage ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J ECONOAIR Premium L-5PTR personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery pack. The L-5PTR can be programmed for ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
It is suitable for experiments in biopharmaceuticals, pharmaceuticals, cell biology and other fields, for the isolation and purification of microbial organisms, cellular proteins, mycobacteria and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you