Aerosols Equipment available in Norway

Available in Norway| Near Norway
243 Results found

We couldn't find any results in Norway

Here is a list of results available in Norway

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Aerosols ×

  • Available in: Europe ×

  • Available in: Norway ×

Model 1.109 - Portable Aerosol Spectrometer

by Grimm Technologies     based in Douglasville, GEORGIA (US) (USA)

Grimm is a leading engineering technology provider undertaking research and design and production of different aerosol spectrometers for research as well as indoor and outdoor air quality monitoring. This powerful instrument gives the user the ability to continuously measure in real time particles in 31 different size channels and present the data ...

Filter-Check SubMicron Aerosol Spectrometer/Filter Efficiency Monitor

by Grimm Technologies     based in Douglasville, GEORGIA (US) (USA)

The requirement for filter efficiency measurement (contamination control) has been outlined for years by ASHRAE 52.1 as a classical gravimetric method. Since the concentration of smaller particulate in ambient air is dramatically increasing, new methods need to be developed for air cleaning devices to study the removal efficiency by particle size. ...

TSI - Model 3079 - Aerosol Generator

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

Aerosol Generator 3079 is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.0 to 4.2 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected by a hood, making this ...

Testo REXS - High Mass Soot Generator

by Testo AG     based in Lenzkirch, GERMANY

REXS: Reproducible EXhaust Simulator – generates nano-sized soot particles which are very similar to diesel soot. But unlike soot from a diesel engine, REXS soot is consistent time after time. Going this artificial route can reduce cost of ownership by as much as 80% compared to the traditional method of using exhaust from a real combustion ...

Dekati - Thermodenuder

by Dekati Ltd.     based in Kangasala, FINLAND

Dekati® Thermodenuder is used to remove volatile and semivolatile compounds from aerosol sample in order to eliminate unwanted sample transformations e.g. in engine exhaust measurements. The volatile and semivolatile compounds are vaporized when they enter the instrument and then adsorbed into active charcoal which has been designed to the form of ...

TSI - Model 3079A - Aerosol Generators

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

Aerosol Generator 3079A is a rugged, compact atomizer generates particles in concentrations up to 108 particles/cm3 and offers an adjustable flow rate from 1.2 to 5.0 L/min. A built-in, low-noise compressor provides compressed air, and the atomizer head is made entirely of stainless steel. Operating components are protected by a hood, making this ...

Aurora - Model 1000 - Integrating Nephelometer

by American Ecotech LLC     based in Warren, RHODE ISLAND (USA)

User friendly, easy to use and maintain, the Aurora 1000 lowers the cost of ownership for aerosol light scattering, visibility and particulate monitoring instrumentation. The Aurora 1000 uses a single wavelength for scattering coefficient visibility measurements at one of three user specified wavelengths. Ecotech, through collaboration with ...

Kimre - Model Aerosep - Multi-Stage Aerosol Separation Systems

by Kimre, Inc.     based in Homestead, FLORIDA (USA)

Aerosols are suspended liquid or solid particles ranging in diameter from the submicron range to the 10 to 20µm size. Kimre offers the AEROSEP Multi-Stage Aerosol Separation System to collect submicron particulates which are hygroscopic using the principles of condensation scrubbing. Aerosols as small as 0.2 microns in diameter pass through ...

OC-EC Lab - Aerosol Analyzer

by Sunset Laboratory     based in Tigard, OREGON (USA)

The Lab OC-EC Aerosol Analyzer is the industry standard for environmental and workplace monitoring. This instrument uses a proven thermal-optical method to analyze for OC-EC aerosols collected on quartz filters. It is the basis for NIOSH Method 5040 and is fully compliant with the IMPROVE protocol. It features a new and improved microcontroller ...

Aerosol Nebulizer - Model ATM 226 - Atomizer Aerosol Generator with Pump

by Topas GmbH     based in Dresden, GERMANY

The Atomizer Aerosol Generator ATM 226 is especially suited for clean room and filter testing applications and characterized by:- Compact stainless steel housing - easy-to-clean- Higher mass output up to 2.5 g/h- Built-in compressor - direct operation with mains supply 100..240VAC- With substances DOP or DEHS it produces spherical particles of ...

Ecotech - Model ACS1000 - Aerosol Conditioning System

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Studying the hygroscopic properties of aerosol particles offers insights into their effect on the earth’s radiative balance. By simultaneously exposing aerosol particles to different relative humidity, Ecotech’s Aerosol Conditioning System (ACS 1000) enables the effect of water uptake on the particles’ physical properties to be ...

AeroFid - Model 200 - Automatic Micro Leak Detector for Filled Aerosol Cans

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one ...

Aerosol Precipitators

by Trema Verfahrenstechnik GmbH     based in Kemnath, GERMANY

Cost-effective aerosol separation (

Model AMS 02 - Aerosol Monitoring System

by BITT Technology-A Gesellschaft mbH     based in Spillern, AUSTRIA

The AMS 02 has been developed by BITT Technology and the Institute of Nuclear Techniques, Technical University of Budapest and includes the experience of more than 30 years. Among other things, the most important features are the reliable function also under difficult conditions, as well as the possibility of a maintenance-free operating over ...

Model AMS02 M - Aerosol Monitoring System

by BITT Technology-A Gesellschaft mbH     based in Spillern, AUSTRIA

This is a special version of the AMS series of BITT Technology. The AMS02 units are generally characterized as multi-detector equipment with an automatic sample changer. The AMS02M-2008 is having one or two radiation detectors but manual sample changing. By using the one detector system a PIPS detector is always inserted for the alpha and the ...

Promo - Model 2000 - Light-Scattering Aerosol Spectrometer System

by Palas GmbH     based in Karlsruhe, GERMANY

Promo 2000 is a light-scattering aerosol spectrometer system for particle size analysis and concentration determination that can be equipped with all welas sensors.

Palas - Model RBG 1000 - Low-Concentration Test Aerosol Generator

by Palas GmbH     based in Karlsruhe, GERMANY

Low-concentration solid particle aerosols produced from powders are required for many applications in research, development, and quality assurance and for the calibration of particle measurement devices.

Palas - Model BEG 1000 - Low-Concentration Test Aerosol Generator

by Palas GmbH     based in Karlsruhe, GERMANY

Generation of test aerosols from powder, dust, pollen, etc.; mass flow approx. 8 g/h to 6 kg/h. Many applications in research, development, and quality assurance require solid particle aerosols from powders and dusts. For over 20 years, the BEG 1000 has been successfully used for the reliable dispersion of non-cohesive powders, e.g. to generate ...

Ecotech - Model Aurora 2000 - PM Correlating Nephelometer

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Aurora 2000 PM Correlating Nephelometer is part of the ‘new generation’ nephelometers using a single wavelength and an BETA monitor to measure aerosol light scattering and derive particulate concentrations. The Aurora 2000 enables the calculation of a correlation factor based on a PM2.5 reference method which is then used to derive ...

TSI - Model 3076 - Aerosol Generator

by TSI Incorporated     based in Shoreview, MINNESOTA (USA)

Aerosol Generator Model 3076 is a Collison-type atomizer that generates aerosols of constant particle size in concentrations over 107 particles/cm3. Its nominal aerosol flow rate is 3.0 L/min. Stainless-steel components make it suitable for the specialized applications listed below, in additon to basic aerosol research.

Need help finding the right suppliers?

Let the XPRTs do the work for you