Only show results in Michigan? Ok

aerosol collection (Aerosols) equipment

  • Showcase

    Micro Pulse LiDAR - Model MiniMPL - Atmospheric Monitoring System

    The first generation of micro pulse lidar technology was designed by NASA for detecting high cirrus clouds. Our subsequent commercial “Micro Pulse LiDAR” generations (MPL and MiniMPL) have evolved with the goal of making the most cost-effective, robust, and sensitive backscatter lidar possible. This has been achieved by using quality ...

    By Micro Pulse LiDAR, part of Hexagon based in Lanham, MARYLAND (USA).

  • Premium

    Metrohm - Model 2.136.0400 - Particle Into Liquid Sampler - PILS

    Particle into Liquid Sampler for the collection of ambient aerosols. Coupling with ion chromatographs allows automatic determination of the ionic composition of the aerosols without requiring additional sample preparation.

    By Metrohm AG based in Herisau, SWITZERLAND. from Voltammetry Product line

  • Premium

    Dekati - Model DLPI+ - Low Pressure Impactor

    The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size distribution. The DLPI+ classifies and collects particles into 14 size fractions in the range of 16 nm – 10 μm. In each size fraction, the particles are collected on 25 mm collection substrates that are weighed ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Gravimetric Measurement Product line

  • Premium

    Dekati - Model HT-DLPI+ - High Temperature Low Pressure Impactor

    The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size distribution. The HT-DLPI+ can be heated up to 180 °C allowing direct measurement of up to 180 °C aerosol samples without the risk of condensation or sample transformations. The impactor support ...

    By Dekati Ltd. based in Kangasala, FINLAND. from Fine Particle Measurement - Gravimetric Measurement Product line

  • SASS - Model 4100 - Two Stage Aerosol Collector

    two-stage filter-based aerosol collection device. Many applications require the collection and analysis of aerosol particles, ranging from environmental air sampling and counter-terrorism to epidemiology, medicine, and agriculture. These applications typically involve the monitoring or collection of airborne plant, animal or human pathogens. But ...

    By Research International, Inc. based in Monroe, WASHINGTON (USA). from Collection Tools Product line

  • GEA Bischoff - Wet Electrostatic Precipitators (WESP)

    Wet electrostatic precipitators (WESP) are used to remove particulates and aerosols from saturated gases. They are operating with high efficiencies and can reach very low clean gas loads below 1 mg/ Nm3. Usually WESPs are built downstream scrubbers.

    By GEA Bischoff GmbH based in Essen, GERMANY. from Dust Collection Product line

  • Brechtel - Model 4001 - Particle Into Liquid Sampler (PILS)

     The PILS is one of the simplest methods available to acquire samples for aerosol chemistry applications. It can be easily integrated with the analytical method of your choice. Ion chromatography systems and total organic analyzers are routinely used with the PILS. These analytical methods allow on-line analyses of aerosol ...

    By Brechtel based in Hayward, CALIFORNIA (USA). from Chemistry and Black Carbon Product line

  • Tisch - Model 3306 - Impactor Inlet

    The Impactor Inlet is an accessory for the Aerodynamic Particle Sizer® (APS™) spectrometer. It combines a single-stage impactor with a filter to take a size-segregated sample. It then directs a small, representative sample of the initial test aerosol (diluted at 80 to 1) into the APS spectrometer for size-distribution measurement. The ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Particle Sizers Product line

  • Diffusion Dryer

    The Diffusion Dryer is an accessory that is used commonly to dry and remove water vapor from aerosol generated by our Atomizers. The dryer includes a removable extractor for collecting large water droplets. Desiccant surrounding the aerosol flow path removes excess moisture by diffusional capture. Because the aerosol never comes in contact with ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Diffusion Dryer Product line

  • EcoChem - Model PAS 2000CE - Compact Real-Time Photoelectric Aerosol Sensor

    The PAS 2000 works on the following principles: Using an Excimer lamp the aerosol flow is exposed to UV radiation. The Excimer lamp offers a high intensity, narrowband source of UV radiation. The wavelength of the light is chosen such that only the carbon aerosols are ionized, while gas molecules and non-carbon aerosols remain neutral. The carbon ...

    By EcoChem Analytics based in League City, TEXAS (USA). from Photoelectric Aerosol Sensor (PAS) Monitoring Technology Product line

  • Model PAS 2200CE - Photoelectric Aerosol Sensor (PAS)

    The PAS 2000 works on the following principles: Using an Excimer lamp the aerosol flow is exposed to UV radiation. The Excimer lamp offers a high intensity, narrowband source of UV radiation. The wavelength of the light is chosen such that only the carbon aerosols are ionized, while gas molecules and non-carbon aerosols remain neutral. The carbon ...

    By EcoChem Analytics based in League City, TEXAS (USA). from Particles Product line

  • Model CPM-310 - Continuous Particulate Monitor

    The CPM-310 aerosol monitor is intended for collection and measurement of radioactive alpha and beta aerosols on fixed filter. This monitor can be used as a part of large monitoring system as well as an autonomous monitor.

    By VF, a.s. based in ČernĂ¡ Hora, CZECH REPUBLIC. from Environmental Monitoring - Particulate, Iodine and Noble Gas Monitors Product line

  • SASS - Model 2300 - Wetted Wall Air Sampler

    The SASS 2300 delivers all the performance you need in a portable aerosol particle collection system. Extremely long sampling protocols of up to several days are supported and sample fluid volume is maintained constant over the entire collection period, independent of ambient air temperature or relative humidity, providing unsurpassed monitoring ...

    By Research International, Inc. based in Monroe, WASHINGTON (USA). from Collection Tools Product line

  • Fast Aerosol Spectrometer - TR-DMPS

    To measure aerosol size distributions, this instrument system performs three operational functions: charging, size classification, and detection. Particle charging is accomplished by exposing the aerosol sample to intense monochromatic UV light which results in photoelectric ejection of electrons from particle surfaces. The charged aerosol then ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • Model 4200 and 4240 Series - Virtual Impactor Aerosol Concentrator

    Model 4200 and Model 4240 AEROSOL CONCENTRATOR is a virtual impactor aerosol concentrator. Air is sampled at 300 L/min per minute into the concentrator. Particles >2.0 µm (Model 4220) or >1.0 µm (Model 4240) are classified by inertial separation and concentrated into a 1.0 L/min air stream for collection and analysis. Patented ...

    By MSP Corporation based in Shoreview, MINNESOTA (USA). from Aerosol Instruments - 4200 Series Aerosol Concentrators Product line

  • Spectrometer/Filter Efficiency Monitor

    This state-of-the-art aerosol monitoring system from GRIMM is the latest instrument in our renowned line of high speed counters. With a resolution of 1 count/liter, the aerosols are collected on a removable 47 mm Teflon filter for gravimetric or chemical analysis. This unique dual technology is incorporated in all GRIMM real-time particle size ...

    By Grimm Technologies based in Douglasville, GEORGIA (US) (USA).

  • MION - Model 3.0 - Intake and Aerosol Removal Machine

    The lubrication and cooling of the tools mounted on the machines is generally done through the use of oil in water emulsion and/or stabbing, whose pouring on the moving bodies induces the formation of aerosols, which tend to spread rapidly in surrounding  areas. The resulting pollution of the workplace means, if the contamination is ...

    By Mion Costruzioni Meccaniche SRL based in Arcade (TV), ITALY.

  • Combined Sampling Station

    The AirPhoton combined sampling station measures aerosols in real time using a 3 wavelength integrating nephelometer as well as collecting and preserving the aerosols themselves on filters for later analysis. Aerosols are separated into fine and coarse fractions and preserved on filters protected within a cartridge assembly. The cartridge is ...

    By ​AirPhoton, LLC. based in Baltimore, MARYLAND (USA).

  • Model OC-EC Lab - Aerosol Analyzer

    The Lab OC-EC Aerosol Analyzer is the industry standard for environmental and workplace monitoring. This instrument uses a proven thermal-optical method to analyze for OC-EC aerosols collected on quartz filters. It is the basis for NIOSH Method 5040 and is fully compliant with the IMPROVE protocol. It features a new and improved microcontroller ...

    By Sunset Laboratory, Inc. based in Tigard, OREGON (USA).

  • Sarad poCAMon - Personal Continuous Air Monitor (CAM)

    The poCAMon personal online continuous air monitor combines a very compact design with a high flow rate and long battery life. The unit measures long living aerosols as well as short living Radon daughters by alpha spectroscopy and beta counting. The instrument recognises if only natural Uranium aerosols have been collected and adjusts the related ...

    By Sarad GmbH based in Dresden, GERMANY. from Radiation Protection & Nuclear Security Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you