Only show results in Michigan? Ok

aerosol forming (Aerosols) equipment

  • Premium

    Jones+Attwood HI-FLOW - Screen for Flow Rates up to 3000 Liters Per Second

    The highly efficient configurations of the J+A Hi-Flow™ screen exceed other screens on the market. The continuous band of screening panels are available in 2, 3, 5 or 6 mm perforations to accommodate a wide range of flows, water level and types of effluent. The total capture design has no carryover, and result in a 81% capture rate, with ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Premium

    Dust Mop Treatment - Oil Based Spray - 12 Cans/Case

    Dust Mop Treatment aerosol is formulated with special non staining mineral oils to aggressively attract and collect high quantities of dust without harming floors or other hard surfaces. This convenient aerosol not only draws dust into mop fibers, but forms compact dust balls that are easily shaken off after use. It's safe to used on surfaces like ...

    By Interstate Products Inc/ Interstate Products based in Sarasota, FLORIDA (USA). from Aerosols - Carpet & Floor Care Product line

  • Premium

    Cold Zinc Galvanize Aerosol Spray - 12 Cans/Case

    A high solids zinc rich coating that forms an electrolytic bond on metal surfaces and prevents the formation of rust and corrosion. Prevents further damage and stops creepage in areas where rusting has already occurred. Provides a cold applied coating which equals the performance of hot dip galvanize treatments. Resists abrasion and large ...

    By Interstate Products Inc/ Interstate Products based in Sarasota, FLORIDA (USA). from Aerosols - Coatings Product line

  • Salamandra Safety - Model AGS-2/4 - Aerosol Fire Extinguisher AGS-2/4

    AGS-2/4 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. Generator is structurally stable to vibration. It has a low temperature of the outgoing aerosol ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-6 - Aerosol Fire Extinguisher AGS-6

    AGS-6 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of cylinder with metal body which has outlets on the whole lateral surface. It has a low temperature of the outgoing aerosol stream due to the cooling unit which is located ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Extinguishing Aerosol

    All Fire Extinguishing Aerosol Generators use the latest generation of the stable SBK aerosol forming solid compound (containing no pyrotechnic substances). Upon activation the solid compound is transformed into a rapidly expanding, highly efficient and highly effective fire extinguishing aerosol, based on Potassium salts.

    By Genco Electro-Mechanical based in Cairo, EGYPT. from Fire Fighting System Product line

  • Salamandra Safety - Model AGS-11/4 - Aerosol Fire Extinguisher AGS-11/4

    DescriptionAGS-11/4 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of a low metal cylinder which has a nozzle gap at the whole circle. Despite its small dimensions this generator has large protected volume up to 18 m3. Due to its ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-11/5 - Aerosol Fire Extinguisher AGS-11/5

    DescriptionAGS-11/5 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of a low metal cylinder which has a nozzle gap at the whole circle. Despite its small dimensions this generator has large protected volume up to 28 m3. Due to its ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-11/6 - Aerosol Fire Extinguisher AGS-11/6

    AGS-11/6 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of a low metal cylinder which has a nozzle gap at the whole circle. Despite its small dimensions this generator has large protected volume up to 48 m3. Due to its ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-7/2 - Aerosol Fire Extinguisher AGS-7/2

    AGS-7 Series designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. Due to injector which is installed on the generator, the aerosol is actively mixed with air, ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-7/1 - Aerosol Fire Extinguisher AGS-7/1

    AGS-7 Series designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. Due to injector which is installed on the generator, the aerosol is actively mixed with air, ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-8/1 - Aerosol Fire Extinguisher AGS-8/1

    AGS-8 Series designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. In fact this generator in the analogue of AGS-7 but due to the labyrinth construction, the ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-8/2 - Aerosol Fire Extinguisher AGS-8/2

    DescriptionAGS-8 Series designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. In fact this generator in the analogue of AGS-7 but due to the labyrinth ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-11/1 - Aerosol Fire Extinguisher AGS-11/1

    AGS-11/1 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of a low metal cylinder which has a nozzle gap at the whole circle. Despite its small dimensions this generator has large protected volume up to 2.3 m3. Due to its ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-11/7 - Aerosol Fire Extinguisher AGS-11/7

    AGS-11/7 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of a low metal cylinder which has a nozzle cap at the end of it. Despite its small dimensions this generator has large protected volume up to 10 m3. Due to its construction, ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-11/3 - Aerosol Fire Extinguisher AGS-11/3

    DescriptionAGS-11/3 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of a low metal cylinder which has a nozzle gap at the whole circle. Despite its small dimensions this generator has large protected volume up to 6 m3. Due to its ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-11/2 - Aerosol Fire Extinguisher AGS-11/2

    DescriptionAGS-11/2 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of a low metal cylinder which has a nozzle gap at the whole circle. Despite its small dimensions this generator has large protected volume up to 3.4 m3. Due to its ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Salamandra Safety - Model AGS-3 - Aerosol Fire Extinguisher AGS-3

    AGS-3 is designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.Generator is made in a shape of cylinder with metal body which has outlets on the whole lateral surface. It has a low temperature of the outgoing aerosol stream due to the cooling unit which is located ...

    By Salamandra Safety based in Moscow, RUSSIA.

  • Engeldot - Floating Rotating Bubble Aerator

    The floating rotating bubble aerator can be used to easily add oxygen to water. Due to its unique configuration oxygen is added under water. Therefore no aerosol is formed and is sound emission contained to a minimum. This is highty functional for revitalizing water, and adding oxygen to aerobic processes.

    By Engeldot-Water based in Hoogeveen, NETHERLANDS.

  • DMT - Model CCN-100 and CCN-200 - Cloud Condensation Nuclei Counter

    A popular instrument that measures cloud condensation nuclei. Options: Single or Dual Growth Columns. Clouds are a key factor in moderating climate change. Cloud condensation nuclei (CCN) are those aerosol particles that can form into cloud droplets, and an understanding of CCN concentrations in space and time is necessary if models are to ...

    By Droplet Measurement Technologies (DMT) based in Boulder, COLORADO (USA). from Airborne Instruments- Ice and Cloud Nuclei Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you