PM10 (Aerosols) Equipment Available In Djibouti
-
PremiumManufactured by Dekati Ltd.based in FINLAND
PM10/PM2.5 inlets for ambient air measurements. EN 12341 PM10 inlet downscaled to 30 lpm. PM2.5 inlet, 30 ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Ambient air quality is critical for our health and the environment. MARGA is a fully autonomous sampling and measurement system that continuously measures the water-soluble gas and aerosol components that have a direct effect on air quality. These results can then be used to study the formation of aerosols from their precursor gases and how their concentration and composition vary with ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
Manufactured by AirPhoton, LLC.based in USA
The Dual External Inlet is available in a variety of configurations. It is available as either a single or dual inlet design with options for PM10, PM4, PM2.5 and PM1 collection using impactors or cyclone ...
-
Manufactured by TSI Incorporatedbased in USA
The DUSTTRAKâ„¢ Aerosol Monitor is a portable, battery-operated laser photometer with real-time mass concentration readout and data logging capability. The monitor provides reliable exposure assessment by measuring particle concentrations corresponding to respirable size, PM10, PM2.5 or PM1.0 size ...
-
Manufactured by AirPhoton, LLC.based in USA
The Single Inlet/Filter Unit employs a PM10 inlet designed to run at 5 liters per minute. The flow rate can be adjusted by a manual valve in the Sampling Control Box. An option exists to further separate PM2.5 and coarse mode (2.5 lessthan d lessthan10mm) aerosols using Nuclepore filter separation in our FC10 filter cartridge. Other size ...
-
Manufactured by AirPhoton, LLC.based in USA
The IN102 Size Scanning Nephelometer lets you select the size of aerosol you wish to sample in the range from PM2.5 to PM10. Our feedback flow control system makes this possible. We use a sharp cut off cyclone inlet a custom made smart blower (fan) and carefully monitor and adjust the flow rate to achieve this ...
-
Manufactured by AMS Analiticabased in ITALY
Glass fiber filters PTFE coating for ambient PM10 and PM2,5 application. Low air resistance for use in critical aerosol sampling tests that demand filter purity and non hygroscopic properties such as diesel exhaust, stack emission control, and PM10/PM2,5 ambient air monitoring for particulate ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The method applied by the APM-2 uses the light scattered by tiny particles (nephelometry) to determine the PM10 or PM2.5 concentration in the ambient air directly and continuously. After performing a qualification test, TÜV Rheinland certified the procedure as equivalent to the customary gravimetric method. The system features an ...
-
Manufactured by TSI Incorporatedbased in USA
The personal aerosol monitor provides real-time aerosol mass concentration readings for PM10, respirable, China respirable, PM2.5, PM1 and 0.8 DPM. The perfect solution for foundries, construction, refineries, petrochemical, ceramics, aerospace, mining, and ...
-
Manufactured by TSI Incorporatedbased in USA
Our newest personal aerosol monitor provides real-time aerosol mass concentration readings for PM10, respirable, China respirable, PM2.5, PM1 and 0.8 DPM. The SidePak AM 520i is IECEx, ATEX, CSA, and IECEx-SIM certified for use in explosive ...
-
Manufactured by Qingdao Yingying Environmental Technology Co., Ltd.based in CHINA
The instrument uses a filter weighing method to capture total suspended particulates (TSP) or inhalable particulates (PM10) or fine particulate matter (PM2.5 optional) in ambient air. The new upgrade of the three core systems ensures the reliability of the instrument, improves the stability of the system, and enhances the accuracy of ...
-
Manufactured by TSI Incorporatedbased in USA
Simultaneously measure PM1, PM2.5, Respirable, PM10, and total PM size fractions. DustTrak Environmental Monitor 8543 is a data-logging, light-scattering laser photometer that enables simultaneous real-time aerosol mass readings of particulate matter. DustTrak air monitors use a sheath air system that isolates the aerosol in the optics ...
-
based in GERMANY
optical and electrical particle detection in one single device. This system offers many features, such as a 10 nm to 35 µm ultra-wide particle size range, simultaneous PM1, PM2.5, and PM10 measurement, 41 high resolution particle size channels, remote data transmission and instrument control. Easy to use, transport and deploy, it can be ...
-
Manufactured by Everise Technology Ltd.based in CHINA
With 532nm laser, EV-Lidar-CAM with 3D scanning function, is mainly used to continuously monitor horizontal and vertical distribution of atmospheric aerosols, to analyze composition and spatial&temporal evolution of aerosols, to monitor the concentration distribution of PM10 and PM2.5 vertically and horizontally, and to monitor weather ...
-
Manufactured by Everise Technology Ltd.based in CHINA
of atmospheric aerosols (or dust), height, layers and structure of clouds, atmospheric visibility and PM2.5/PM10 concentration. Meanwhile, EV-Lidar could monitor distribution of industrial dust emission, diffusion law of pollution resources over the city, and monitor weather process of haze and sandstorm. It has a great significance on monitoring ...
-
Manufactured by Palas GmbHbased in GERMANY
Air quality analyzer for monitoring fine particulate matter (PM1, PM2.5, PM4, PM10, TSP) under demanding environmental ...
-
Manufactured by TSI Incorporatedbased in USA
The DustTrak Environmental Aerosol Monitor is an air monitoring system built to house DustTrak photometer models 8540 or 8543. DustTrak's early detection features allow quick response to exposure concerns as PM10, PM1 and PM2.5. This system is built upon proven DustTrak technology that thousands of people use every day. It can be ...
-
Manufactured by Digitel Elektronik AGbased in SWITZERLAND
DIGITEL High Volume Samplers DH-77 are fully automatic systems to sample dust and aerosol particles for later assessment and analysis (gravi-metric and analytical determination). The sampler operation range is 100 to 1.000 litres per minute (6 to 60 m³/h). The sampling can be programmed with starting time and duration but also for more complex applications using cycles for interrupted ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you