PM2.5 (Aerosols) Equipment Available In Monaco
-
PremiumManufactured by Dekati Ltd.based in FINLAND
PM10/PM2.5 inlets for ambient air measurements. EN 12341 PM10 inlet downscaled to 30 lpm. PM2.5 inlet, 30 ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Ambient air quality is critical for our health and the environment. MARGA is a fully autonomous sampling and measurement system that continuously measures the water-soluble gas and aerosol components that have a direct effect on air quality. These results can then be used to study the formation of aerosols from their precursor gases and how their concentration and composition vary with ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
Manufactured by AirPhoton, LLC.based in USA
The Dual External Inlet is available in a variety of configurations. It is available as either a single or dual inlet design with options for PM10, PM4, PM2.5 and PM1 collection using impactors or cyclone ...
-
Manufactured by TSI Incorporatedbased in USA
The DUSTTRAKâ„¢ Aerosol Monitor is a portable, battery-operated laser photometer with real-time mass concentration readout and data logging capability. The monitor provides reliable exposure assessment by measuring particle concentrations corresponding to respirable size, PM10, PM2.5 or PM1.0 size ...
-
Manufactured by AirPhoton, LLC.based in USA
The Single Inlet/Filter Unit employs a PM10 inlet designed to run at 5 liters per minute. The flow rate can be adjusted by a manual valve in the Sampling Control Box. An option exists to further separate PM2.5 and coarse mode (2.5 lessthan d lessthan10mm) aerosols using Nuclepore filter separation in our FC10 filter cartridge. Other size ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
Mobile measuring instrument with scattered light sensor for real-time monitoring of PM2.5 concentrations. The compact and lightweight, hand-held MDM-2 (Mobile Dust Monitor) measures the current PM2.5 concentration at the measuring site in real time. It applies a photometric method using scattered light (nephelometry). A graphical trend ...
-
Manufactured by AirPhoton, LLC.based in USA
The IN102 Size Scanning Nephelometer lets you select the size of aerosol you wish to sample in the range from PM2.5 to PM10. Our feedback flow control system makes this possible. We use a sharp cut off cyclone inlet a custom made smart blower (fan) and carefully monitor and adjust the flow rate to achieve this ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The Aurora 2000 PM Correlating Nephelometer is part of the ‘new generation’ nephelometers using a single wavelength and an BETA monitor to measure aerosol light scattering and derive particulate concentrations. The Aurora 2000 enables the calculation of a correlation factor based on a PM2.5 reference method which is then used to ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The method applied by the APM-2 uses the light scattered by tiny particles (nephelometry) to determine the PM10 or PM2.5 concentration in the ambient air directly and continuously. After performing a qualification test, TÜV Rheinland certified the procedure as equivalent to the customary gravimetric method. The system features an ...
-
Manufactured by HILASE Ltd.based in HUNGARY
Hilase operates a mobile atmospheric aerosol measurement station, built into a special van. The central instrument of the station is a four wavelength photoacoustic instrument (MuWaPas) developed by Hilase, which is capable to measure real time the absolute optical absorption of the sampled aerosols (TSP, PM10 or PM2.5) in an exceptionally ...
-
Manufactured by Tisch Environmental Inc. - Tisch Internationalbased in USA
The dichotomous air sampler is a dual-filter air sampler for thesimultaneous collection of the fine PM2.5 and the coarse PM10-2.5particles contained within PM10. Split flow configuration of the virtualimpactor allows a PM10 aerosol to be separated into fine particles andcoarse particles for subsequent collection onto 2 separate ...
-
Manufactured by Tisch Environmental Inc. - Tisch Internationalbased in USA
The dichotomous air sampler is a dual-filter air sampler for the simultaneous collection of the fine (PM2.5) and the coarse (PM10-2.5) particles contained within PM10. Split flow configuration of the virtual impactor allows a PM10 aerosol to be separated into fine particles and coarse particles for subsequent collection onto 2 separate ...
-
Manufactured by TSI Incorporatedbased in USA
The personal aerosol monitor provides real-time aerosol mass concentration readings for PM10, respirable, China respirable, PM2.5, PM1 and 0.8 DPM. The perfect solution for foundries, construction, refineries, petrochemical, ceramics, aerospace, mining, and ...
-
Manufactured by TSI Incorporatedbased in USA
Our newest personal aerosol monitor provides real-time aerosol mass concentration readings for PM10, respirable, China respirable, PM2.5, PM1 and 0.8 DPM. The SidePak AM 520i is IECEx, ATEX, CSA, and IECEx-SIM certified for use in explosive ...
-
Manufactured by Qingdao Yingying Environmental Technology Co., Ltd.based in CHINA
The instrument uses a filter weighing method to capture total suspended particulates (TSP) or inhalable particulates (PM10) or fine particulate matter (PM2.5 optional) in ambient air. The new upgrade of the three core systems ensures the reliability of the instrument, improves the stability of the system, and enhances the accuracy of ...
-
Manufactured by TSI Incorporatedbased in USA
Simultaneously measure PM1, PM2.5, Respirable, PM10, and total PM size fractions. DustTrak Environmental Monitor 8543 is a data-logging, light-scattering laser photometer that enables simultaneous real-time aerosol mass readings of particulate matter. DustTrak air monitors use a sheath air system that isolates the aerosol in the optics ...
-
Manufactured by Everise Technology Ltd.based in CHINA
With 532nm laser, EV-Lidar-CAM with 3D scanning function, is mainly used to continuously monitor horizontal and vertical distribution of atmospheric aerosols, to analyze composition and spatial&temporal evolution of aerosols, to monitor the concentration distribution of PM10 and PM2.5 vertically and horizontally, and to monitor weather ...
-
Manufactured by Everise Technology Ltd.based in CHINA
of atmospheric aerosols (or dust), height, layers and structure of clouds, atmospheric visibility and PM2.5/PM10 concentration. Meanwhile, EV-Lidar could monitor distribution of industrial dust emission, diffusion law of pollution resources over the city, and monitor weather process of haze and sandstorm. It has a great significance on monitoring ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you