Air Blowers Equipment For Air And Climate Available In Newfoundland
-
ShowcaseManufactured by BioMicrobics, Incbased in USA
The HighStrengthFAST system is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in ...
-
ShowcaseManufactured by Proco Products, Inc.based in USA
Proco Style 233 expansion joints are built to withstand even the most rigorous piping system configurations. They are triple wide-arch products, specifically constructed to reduce or eliminate common occurrences such as noise and vibration, misalignment/offset, or turbulence. Style 233 expansion joints are appropriate for a wide variety of industrial applications, and are available in open arch ...
-
ShowcaseManufactured by FPZ S.p.A.based in ITALY
The side channel single-impeller and single-stage (MS) blowers represent one of the main FPZ product ranges. A point of reference in many fields of application, the MS blowers are characterized by a compact design that allows a higher installation flexibility compared to other product ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-EDL-14M cart mounted mobile low volume air sampler with digital flow meter has an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm to 213 cm above floor level. Model DF-EDL-14M contains state of the art microprocessor electronics, which provides for corrected flow rate measurements, volume totalizations, and an RS232 ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T8400T (100-120VAC) and the T8400TE (200-240VAC) Series Air Samplers are high volume air samplers with a two stage, thermally protected electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring gauge calibrated in cubic ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The VORTAB VMR Meter Run flow conditioner provides a low pressure loss solution to flow profile irregularities caused by elbows, valves, blowers, compressors and other disruptions that commonly occur in piping and duct runs. The VSR Meter Run configuration is available for those applications that require lengths shorter than the VMR ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Rotary air separator is one of sorting products that are developed by JONO's independent research.By this separator,material is separated into heavy fraction and light fraction.With the reasonable structure,high separation efficiency, low noise, small vibration,free- block.It is widely applied in various waste treatment, especially in packaging waste ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model GAS-EDL-300W-HT air sampler is a powerful small foot print light weight AC/DC powered air sampling system operable from (1) line power or (2) an optional 24VDC external power source. This powerful air sampler is the lightest weight low volume air sampler available. The HT model is designed for operation in ambient temperatures as high as 60°C ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Downdraft Powder Stations keep users safe by containing fingerprint powders during processing. The open-sided, open-top workstation provides unrestricted operator movement and accommodates oversized evidence. Available in 2' and 3' widths, two or more workstations may be placed side-by-side to achieve an unlimited number of width combinations. An optional Transition Connector mounts ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
A compact, VHP resistant remote particle counter. As part of a facility monitoring solution, the IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems (PMS) is an effective piece of a Contamination Control Strategy using the latest technologies to streamline cleanroom monitoring while meeting global regulations including EU GMP Annex 1, ISO 14644-2, and part of a 21CFR Part 11 ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Alpha-Modular-System for large blowers for process air applications. 104 model variants with low pulsation, reduced piping noise, integrated sound reduction measures and fully integrated oil system in the stage. 2-/3-lobe blower stage with direct or belt drive in a modular ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-EDL-22E environmental air sampling system with digital flowmeter is a low-volume air sampler consisting of brushless centrifugal blower with automatic electronic flow control. The vacuum air movement system is mounted on a removable base plate, which can be secured within the GFCI protected aluminum environmental weatherhouse, Model WH-3 having an enclosure rating of IPX3. The digital flow ...
-
PremiumManufactured by Labconco Corporationbased in USA
Using dry heat and nitrogen blow down, the RapidVap Vertex Evaporator speeds evaporation of up to 50 samples at the same time. A convenient touchpad allows easy programming of time and temperature. Up to ten different programs may be stored in the microprocessor for protocol consistency. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Positive displacement blower for industrial high vacuum technology. Aerzen vacuum blowers with hermetically sealed drive (HM) are designed for conveying neutral and aggressive gases and are used in industrial high vacuum technology. Convincing efficiencies and high reliability characterise this ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
The Hi-Flow Radial Filter (HRF-7) is an activated carbon radial molecular air scrubber. It captures VOCs and particulate matter in a broad range of environments. It has a small footprint with a diameter of just 24". It can handle up to 2,800 CFM (when recirculating). The HRF is made of 16-gauge steel and is available in stainless steel. It can be ducted into existing HVAC systems or be used ...
-
PremiumManufactured by Proco Products, Inc.based in USA
What Does a Coarse Bubble Diffuser Do? Coarse bubble diffusers aerate or mix wastewater for effluent / sewage treatment and pollution control. A coarse bubble diffuser produces bubbles which rise from the floor of a wastewater treatment plant or sewage treatment tank. They are used in grit chambers, equalization basins, primary and secondary settling ponds, and areas where sediment settling is a ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T9400 (100VAC) and the T9400E (200VAC) Series Air Samplers are lightweight, compact, high volume air samplers with a two-stage, thermally protected electric motor driven vacuum blower. The unit is equipped with a mounted on-off switch. The T9400/T9400E Air Samplers are equipped with a 4” (102 mm) standard filter holder. Each unit utilizes a heavy-duty polypropylene plastic ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
MacroFITT is a scaled-up version of the FAST process that is engineered for the needs of community wastewater with flows in the 200,000 GPD – 2 million GPD range. This system is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
The FITT-ee product line was created with energy efficiency (“ee”) in mind. The FITT-ee systems operate on the same principles as the traditional FAST line, but with cost effective treatment, requiring less electrical ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model GAS-EDL-HP is a powerful small foot print light weight AC/DC powered air sampling system operable from (1) line power or (2) an optional 24VDC external power source. This powerful air sampler is the lightest weight low volume air sampler available having similar flow rate ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you