Air Blowers Equipment For Air And Climate Available In Netherlands
-
ShowcaseManufactured by BioMicrobics, Incbased in USA
The MicroFAST system is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in wastewater. A treatment tank containing the MicroFAST module receives wastewater from the facility and is typically placed after a primary settling tank or septic tank. The MicroFAST module contains blocks of fixed media and a patented ...
-
ShowcaseManufactured by BioKube A/Sbased in DENMARK
BioKube Venus systems are small STP plants most commonly used for single or smaller groups of households. The Venus systems are typically installed after a septic tank either in- or above ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-EDL-14M cart mounted mobile low volume air sampler with digital flow meter has an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm to 213 cm above floor level. Model DF-EDL-14M contains state of the art microprocessor electronics, which provides for corrected flow rate measurements, volume totalizations, and an RS232 ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-EDL-28BE is a powerful small foot print light weight AC/DC powered air sampling system operable from a line power source. This powerful air sampler is light weight for a low volume air sampler available having similar flow rate capacity. The pump is mounted within a weather resistant aluminum environmental enclosure having four rubber feet. Handles are provided on the enclosure ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DFHV-200 (120VAC) and the DFHV-200E (230VAC) Digital Flow Meter Series air samplers are high volume air samplers with a two stage, thermally protected electric motor driven vacuum blower and a 7-foot long electrical cord. The motor driven blower is contained in a very durable lightweight plastic polycarbonate housing with a sturdy stable base, having non-skid rubber feet. The flow rate is ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Rotary air separator is one of sorting products that are developed by JONO's independent research.By this separator,material is separated into heavy fraction and light fraction.With the reasonable structure,high separation efficiency, low noise, small vibration,free- block.It is widely applied in various waste treatment, especially in packaging waste ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model GAS-EDL-300W-HT air sampler is a powerful small foot print light weight AC/DC powered air sampling system operable from (1) line power or (2) an optional 24VDC external power source. This powerful air sampler is the lightest weight low volume air sampler available. The HT model is designed for operation in ambient temperatures as high as 60°C ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Our updated Air-Cooled Probe design features a more robust alloy construction. Upgraded to 253MA with a new variable-speed high-capacity blower inside the riser, the new design will extend the life of the probe and increase the airflow by an additional ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
QAsh achieves fast ashing times by combining in-situ airflow with a microwave. It has a large floor area to accommodate a large number of samples and is suitable for polymers, oils, food, pulp, sludge, and many other sample ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-EDL-28B is a powerful small foot print light weight AC/DC powered air sampling system operable from a line power source. This powerful air sampler is light weight for a low volume air sampler available having similar flow rate capacity. The pump is mounted on a base plate within a weather resistant aluminum environmental enclosure having four rubber feet. Handles are provided on ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Positive displacement blower for industrial high vacuum technology. Aerzen vacuum blowers with hermetically sealed drive (HM) are designed for conveying neutral and aggressive gases and are used in industrial high vacuum technology. Convincing efficiencies and high reliability characterise this ...
-
PremiumManufactured by Zygo Corporation - AMETEK, Incbased in USA
ZYGO's patented QPSI technology is truly a breakthrough in precision optical testing – it eliminates noise and ripple in phase data due to small vibrations, providing reliable data that would otherwise be noisy with traditional PSI acquisition. QPSI measurements require no special setup or calibration, and cycle times are typically equivalent to standard PSI ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
The NitriFAST is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) that provides additional nitrification of secondary effluent. A treatment tank containing the NitriFAST module receives wastewater from the secondary treatment system, such as the MyFAST, MicroFAST or HighStrengthFAST. Like its cousins in the FAST product line-up, the NitriFAST module ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
A riser is required for attaching the impinger case to the SB-2M for rigid arrangements. Apex Instruments offers risers with a variable speed controller in different configurations. Sample case risers attach to the base of the filter oven for test methods requiring extra height. ...
-
PremiumManufactured by Proco Products, Inc.based in USA
Proco Series 242 expansion joints are molded double-sphere arch expansion joints which are built to withstand even the most rigorous piping system configurations. They allow for axial compression or axial extension, and lateral deflection as well as angular movement. Their easy installation makes them the logical choice for even the toughest ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-EDL-22 environmental air sampling system with digital flowmeter is a low-volume air sampler consisting of brushless centrifugal blower with automatic electronic flow control. The vacuum air movement system is mounted on a removable base plate, which can be secured within the GFCI protected aluminum environmental weatherhouse, Model WH-3 having an enclosure rating of IPX3. The digital ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
Corrosion resistant PTFE interior for acid fume tolerance. Large working area to accommodate multiple type of vessels. Catchment-Tray to contain acid spillage. Has High Efficiency External Blower (150 CFM) for acid fume extraction. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Sensitivity range: 0.3 - 25.0 µm; 1.0 CFM (28.3 LPM) - Built-in pump, choose wireless, analog & digital I/O. Particle Measuring Systems (PMS) is proud to introduce the IsoAir Pro-Plus remote particle counter. This next-generation in Contamination Control Strategy is a fixed environmental monitoring instrument that uses the latest technologies to simplify cleanroom monitoring into a ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
The NEEP ShallowTray®, invented in 1988, was the first low profile air stripper offered to the marketplace. Since then, over 4,000 units have been installed worldwide. The ShallowTray is capable of stripping many different volatile organic contaminants (view list). Over 10,000 analytical tests have been performed on the influent and effluent samples to confirm effective treatment results. ...
-
PremiumManufactured by Fluence Corporationbased in USA
This aerator provides subsurface directional mixing and maximum oxygen transfer while reducing energy consumption with the addition of a self-contained, high-performance regenerative blower. With thousands of units in operation around the world, Tornado subsurface aerators have a proven record of maximizing performance while minimizing energy ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you