Blower Unit (Air Blowers) Equipment
-
Manufactured by Horning Manufacturingbased in USA
The Shredder Mills sports a versatile topnotch blower that makes things happen. High speed will meet and exceed your silo-filling wishes. Switch some belts around and you have a low-speed blower for filling ...
-
Manufactured by Zoonlab GmbHbased in GERMANY
ZOONLAB blower units are characterised by their easy operation and reliability. In contrast to other providers, all of our units are pressure controlled, thereby maximising the operating safety of the animal living space due to a reliable air supply. Important parameters such as the air change rate, volume flow, pressure conditions, ...
-
Manufactured by Cav s.r.l.based in ITALY
Side-channel blower units. Systems designed to take in dust resulting from sanding primer and fillers during surface treatment. They feature a cartridge filter, cleaned by a timed pneumatic rotary nozzle. Dust is taken in and conveyed to a nylon bag which is very easy to remove so that collecting the dust is simple. The machine features a ...
-
Manufactured by Cav s.r.l.based in ITALY
Side-channel blower units. Systems designed to take in dust resulting from sanding primer and fillers during surface treatment. They feature a cartridge filter, cleaned by a timed pneumatic rotary nozzle. Dust is taken in and conveyed to a nylon bag which is very easy to remove so that collecting the dust is simple. The machine features a ...
-
Manufactured by Sodistrabased in FRANCE
Double-skin panel: 2 polyester sides. Thermal insulation: PUR foam, PIR foam. Custom-made product: all ...
-
Manufactured by Cav s.r.l.based in ITALY
Side-channel blower units. Systems designed to take in dust resulting from sanding primer and fillers during surface treatment. They feature a cartridge filter, cleaned by a timed pneumatic rotary nozzle. Dust is taken in and conveyed to a nylon bag which is very easy to remove so that collecting the dust is simple. The machine features a ...
-
Distributed by Oak Environmental Inc.based in CANADA
Oak Environmental's regenerative vacuum/blower units (VAC-R) are carefully designed for today's soil venting requirements. These quiet and dependable VAC-R units are ideally suited for use in sensitive areas where in-situ treatment is preferred. We have VAC-R units for: Vapour extraction, soil remediation, landfill degassing, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T9400 (100VAC) and the T9400E (200VAC) Series Air Samplers are lightweight, compact, high volume air samplers with a two-stage, thermally protected electric motor driven vacuum blower. The unit is equipped with a mounted on-off switch. The T9400/T9400E Air Samplers are equipped with a 4” (102 mm) standard filter holder. Each ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube’s Jupiter Above Ground (A.G) systems are STP plants commonly used for treating waste water from hotels, resorts & smaller villages with daily inlet values of up to 250 m³. The systems are installed above ground after a septic tank and a buffer ...
-
PremiumManufactured by Fluence Corporationbased in USA
This aerator provides subsurface directional mixing and maximum oxygen transfer while reducing energy consumption with the addition of a self-contained, high-performance regenerative blower. With thousands of units in operation around the world, Tornado subsurface aerators have a proven record of maximizing performance while minimizing ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube’s Jupiter systems are STP plants commonly used for treating waste water from hotels, resorts & smaller villages with daily inlet values of up to 250 m³. The systems are typically installed underground in front of a septic tank and a buffer ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
The BioKube BioReactor is most commonly used for treating wastewater from smaller villages and factories and retro fit with daily wastewater outlet of more than 100 m³. The system is designed for placement in in-situ casted concrete ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube Venus systems are small STP plants most commonly used for single or smaller groups of households. The Venus systems are typically installed after a septic tank either in- or above ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
AMETEK Land, Land Instruments International Ltd, formally announces that from the 30th September 2019 the Model 9100 Cross-stack Carbon Monoxide (CO) Monitor will be discontinued from new product ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioContainer Systems are containerized Sewage Treatment Plants, most commonly used for treating waste water at camps, oil rig sites & remote locations. BioContainer comes in different versions of integration of cleanings steps, transportability and capacity. The systems are typically installed above ground for non-permanent ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube’s Pluto systems are small STP plants designed for treating sewage water from single households. The Pluto systems are typically installed after a septic tank either in- or above ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Belt-driven 3-lobe blower with discharge silencer free of absorption material and oilfree according to class 0. Extremely low noise levels, side-by-side installation and versatile adaptability. Available in 17 ...
-
PremiumManufactured by BioKube A/Sbased in DENMARK
BioKube’s Mars 5000 system is a STP most commonly used for smaller residential housing groups or tourist accommodation sites. The Mars 5000 system is typically installed after a buffer tank and a septic tank either in- or above ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Due to the variable speed flow rate control, brushless maintenance free blower and portability, the CF-1512-VBRL is considered to be “The Ideal External Battery Operated Air Sampler”. The brushless blower used in the CF-1512-VBRL draws a maximum of 3.0 Amps at 6.5 CFM, permit-ting longer sampling times on a single battery ...
-
Manufactured by TMC Fluid Systems, Inc.based in USA
as total package units, ready to install or as bare blower units for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you