Air Cleaning Equipment For Air And Climate Available In Delaware
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Fitting to your needs and environment. Perform any flash or prep HPLC application easily and safely with our extremely compact Pure Chromatography Systems. The Pure platform is fitting to your needs and environment and offers maximal user and sample safety, while using minimal ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Capable of anlaysing up to 32 compounds from C6-C12 (used in airmozone) or PAMS. The airmoVOC C6-C12 uses a valve with 1 sample trap. It also features a metalic capillary column. Miniaturization, sensitivity, mobility and flexibility are its main ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
NGA CASTORE XL iQ MPAES is a Nitrogen Generator with Membrane technology. It is engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 40 L/min with a purity up to 99.95% plus a second outlet of dry and clean air. A special carbon filter is used to remove VOC. The CASTORE XL iQ MPAES with its dual Nitrogen and Air outlets has been developed to meet ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s robust Chromium VI submersible probe provides affordable real-time measurement of changes in chromium VI concentration in wastewater. The hexavalent chromium probe utilizes patent-pending technology to provide superior measurement performance across multiple wavelengths of light using UV LEDs. The probes rugged body is built to withstand harsh environments, with titanium or ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The unique sampling probe design is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas resistance; high precision temperature control, ...
-
Premiumbased in USA
The FEM-capable Ozone Module helps you confirm ozone attainment. The Clarity Ozone Module is based on best-in-class technology from 2B Technologies, and provides accurate measurements of ozone in air over a wide dynamic range extending from a few parts-per-billion by volume (ppb) to an upper limit of 100 parts-per-million (ppm) based on the well-established technique of absorption of ultraviolet ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Exhaust Air Cleaning in Stables: Dust and ammonia are the substances to be cleaned from the waste air. Prescribed are cleaning efficiencies from 70-90% depending on where the sheds/stables are located. To efficiently and economically comply with this task, filling materials are needed which can be used in both counter and cross-flow applications (e.g. tunnel ventilation) in local waste air ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Based on the Clean Air Act as well as local regulations, increasingly stringent environmental regulations require the overall reduction of Sulfur emissions. Consequently, it is necessary to monitor and control specific sulfur constituents and total sulfur content in products that are combusted and emitted. Siemens on-line MAXUM Process Gas Chromatographs and Gas Analyzers are utilized for Total ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Mixing chamber (injection chamber) to inject a known volume of a component to generate a gas mixture with known concentration. The process is the primary standard to generate gas mixtures to calibrate gas analyzers. The development was for the most part carried out by the National EU Clean Air Reference Lab, a division of the Federal Environmental Agency, and is documented in ISO 6144 as a ...
-
PremiumManufactured by Labconco Corporationbased in USA
The Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Our system airmOzone C2-C12 allows you to analyze the VOC thanks to: the calibration system with a bottle or permeation tube, a H2 generator, in-built LCD computer with our own operation software VISTACHROM, airmopump sampling, Peltier effect : for cooling, Airmopure : air generator. Applications in the atmosphere pollution, in the petrochemical fence line and clean air ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to air and compressed air flow metering. It is the first, and currently only, thermal mass flow meter to meet SIL 2. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. Additionally, for applications benefiting from a high or low flow alarm point, the ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s robust submersible High Nitrate/Nitrite probe provides affordable real-time measurement of high concentrations of nitrate (NO3) and nitrite (NO2) in water or wastewater. The High Nitrate/Nitrite probe utilizes patent-pending technology to provide superior measurement performance across multiple wavelengths of light using UV LEDs. The probe’s rugged body is built to ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s robust Ozone submersible probe provides affordable real-time measurement of ozone (O3) in water or wastewater. The probe utilizes patent-pending technology to provide superior measurement performance across multiple wavelengths of light using UV LEDs. The probes rugged body is built to withstand harsh environments, with titanium or stainless steel options. Designed to meet the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammoniacontaining species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining Air Sentry II sensors with a central software ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The CON 765 NOY converter was developed for combination with a highly sensitive ECO PHYSICS CLD analyzer and allows the measurement of the total reactive nitrogen oxides (NOY) in the range of parts per ...
-
PremiumManufactured by Cloud Tech Pvt. Ltd.based in INDIA
The Most Innovative Mist Cooling Technology in the Market. Designed for industrial Mist cooling system- the VFD CPRO Mist cooling system module provides for precise solutions for environments of medium and large dimension. Cloud Tech has designed and manufactures CPRO Mist cooling system using upmost technology to satisfy any special needs in the Mist cooling ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you