Air Compliance Equipment For Air And Climate Available In Mississippi
-
Manufactured by Schneider Electricbased in FRANCE
North American air quality sensors detect CO fluctuations in a defined space to help customers ensure building occupant comfort and safety. Part of SpaceLogic: CO/NO2 transmitters detect fluctuations in CO/NO2 through signaling technology that allows an inlet of fresh air for optimal ventilation. The CO/NO2 transmitters ability to act on data that can vary the fan speed of the fresh air supply is ...
-
Manufactured by Tecnoclima Spabased in ITALY
The units CF-XTRIM Tecnoclima are designed and equipped to simplify, as well as reduce the installation process to a minimum, with high energy efficiency in air conditioning in environments, supported by the intelligent and advanced independent management of thermal or cooling energy depending on the needs of the environment being treated: heating or cooling, only when needed. The units CF-XTRIM ...
-
Manufactured by Sodistrabased in FRANCE
Double-skin panel: 2 polyester sides. Thermal insulation: PUR foam, PIR foam (thickness defined depending upon mechanical constraints and temperatures). Duct welded by polyester bridging (No ...
-
Manufactured by Trace Environmental Systems, Inc.based in USA
The Predictive Emissions Monitoring System (PEMS) from Trace Environmental, Inc. enables users to fully comply with continuous stack monitoring requirements using only a PC and software. This solution is a lower-cost/no maintenance alternative to traditional CEMS, guaranteed to be fully compliant and to pass RATA ...
-
Manufactured by Dürr Systems, Inc.based in USA
For low-flow process applications, the Oxi.X RM RTO redefines the economics of clean air compliance compared to other VOC control technologies typically deployed in high-flow process ...
-
Manufactured by Catalytic Products International (CPI)based in USA
For nearly 45 years, Catalytic Products International has focused its efforts on supplying our customers with the world's best air pollution control solutions. In today's environmental climate, just about any source may be a target for add-on air pollution control equipment. As polluting sources become larger (volumes) and less concentrated, Catalytic Products International, Inc. has introduced ...
-
Manufactured by W. A. Benjamin Electric Companybased in USA
The paralleling controls that have been utilized over the past ninety-eight years have included simple rheostat speed controls with Silverstat voltage regulators through the analog automated controllers and now into the digital age of controls. Our latest controls employ the Compass Control System as its’ touchscreen-based operator interface which provides enterprise visibility as well as ...
-
Distributed by TopAir Systemsbased in UNITED KINGDOM
TopAir provides high quality, secure laminar clean benches. TopAir’s clean benches suck air from the room or hall space, transfer the air through a HEPA filter using a fan, and then clean the bench area with filtered air. In Horizontal Benches, the filtered air flows through a filter installed at the back of the bench, towards the staff. All components are manufactured by leading global ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Oxi.X RC regenerative thermal oxidizer (RTO) from Dürr delivers simplicity and cost-effectiveness. The two-chamber, single-vessel system delivers 99+% VOC destruction and thermal efficiencies up to 97%. When it comes to VOC abatement and managing hazardous air pollutants (HAPs), the Oxi.X RC RTO provides exceptional operating economy. For many applications, the Oxi.X RC RTO will run in a ...
-
Manufactured by Catalytic Products International (CPI)based in USA
The QUADRANT IR-Thermal Oxidizer is CPI’s market driven response for simplified air compliance solutions without sacrificing long term reliability, high performance, or uptime assurance. The QUADRANT IR-Series system meets these challenges by incorporating our revolutionary FLOATING TUBE heat exchanger in an integrated package with the famous QUADRANT combustion chamber. This single vessel ...
-
Manufactured by JAG Jakob Ltd.based in SWITZERLAND
The JAG SW diverter valve has been developed for use in pipe systems in which solids in powder form are conveyed by means of compressed air or a vacuum. The diverter valve consists of one input and 3 or 4 outputs for the product media. The desired connection is established by means of a pneumatic diverter system. This enables products in powder form from a single source to be directed optionally ...
-
based in USA
Minimize liability and risk. Streamline EHS compliance. Concrete, cement, and aggregates operations increasingly struggle to ensure that water, air, hazmat and OSHA/MSHA compliance obligations are actually being done. Mapistry solves this problem by consolidating all your compliance requirements, owners, activities and deadlines into one easy-to-use dashboard. Proven water, air, hazmat, SPCC, ...
-
Manufactured by Servomex - a Spectris Companybased in USA
A high-performance multi-gas analyzer designed to provide up to four simultaneous gas stream measurements. The SERVOPRO MultiExact 4100 is a high- performance multi-gas analyzer designed to provide up to four simultaneous gas stream measurements including: O2 (trace, control, and purity), CO2, CO (% and trace), N2O, CH4 (trace). Specifically designed to address the needs of industrial and medical ...
-
Manufactured by Catalytic Products International (CPI)based in USA
This Pre-Owned VECTOR 1e Catalyic Oxidizer has NEVER BEEN COMISSIONED! This all-electric model is designed to handle up to 1000 scfm, and requires no natural gas! Call CPI for an estimate ...
-
Manufactured by WITec GmbHbased in GERMANY
Enclosure: Reduction of environmental interference from sources such as temperature fluctuations, air drafts and acoustic noise. Gas-phase control with air-tight option. Compliance with Laser safety Class 1 available. Optical, electronic and peripheral connection with sealed ...
-
Manufactured by Utile Engineering Co. Ltd.based in UNITED KINGDOM
Atex Compliant to Zone 1. High Efficiency. Oil Free. Low Noise Level. Vibration-Free Running. Easy Maintenance. Long Life. Large Flow ...
-
Manufactured by Ventilatorenfabrik Oelde GmbHbased in GERMANY
An effective extraction system for zinc and galvanizing baths permits the personnel to work free from vapours and without limiting freedom of movement. The fumes are mechanically, physically or chemically treated and cleaned. With our measuring and control technology the airflows are set, controlled and monitored as required. Adding ventilation to the workplace improves the capture of ...
-
Manufactured by Catalytic Products International (CPI)based in USA
VANGUARD Ammonia Abatement Systems are designed to remove ammonia from either a liquid waste stream or from a vapor exhaust. At the heart of the VANGUARD System is our unique catalytic treatment device. The VANGUARD System incorporates unique features that allow for Ammonia removal from air streams with a very small percentage of NOx formation. NOx formation is further reduced by the use of ...
-
Manufactured by Graphic Products, Inc.based in USA
There’s no job too big or too small for Kodiak. This large-format multicolor printer makes it easy to create high-quality signs of all sizes all in one system. Print onto 4’’ - 10’’ wide supply and lengths up to 8 feet long for endless possibilities. It’s perfect for GHS/HazCom 2012 chemical labels, OSHA/ANSI signs with headers, and ...
-
Manufactured by Auburn Systems, LLCbased in USA
The TRIBO.guard II Model 4002 Dust Monitor continuously monitors dust in exhaust ducts to detect filter failures. The 4002 detects changes in the levels and warns of impending failure before emissions become visible. Continuous 4-20mA output is linked to data loggers or other devices, such as PLCs, to record emissions levels, pinpoint maintenance problems, or document Clean Air ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you