Air Contaminant Equipment For Air And Climate Available In Manitoba
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers for airborne molecular contamination (AMC) detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammonia-containing species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Ideal for monitoring levels of artificial Concept smoke and particulate levels in the exhaust gas of industrial combustion or air filtration processes. The CEL-046 is an optical instrument designed to measure the concentration of particulate matter in an exhaust gas passing through a duct, stack or flue; typically the exhaust gas from an industrial combustion process or air filtration ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control, and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for a particular occasion. After dedusting by sampling probe, tracing by ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler is small in size and is compatible with personal sampling. For this configuration, the yellow body diffusive barrier is used without any protective housing. The sampler is attached to a plastic plate and then attached to the lapel or shirt pocket to keep the device near the worker breathing zone. Typically, the sampler would be worn for the the full 8-hour workday. ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Principle : ESE-LASER-HCL-200P Portable laser gas analyzer using a Tunable Diode Laser Absorption Spectroscopy (TDLAS), the realization of the non-contact measurement in high temperature, high pressure, high dust and other harsh test conditions. High selective laser based on frequency, analyzer has good performance of anti interference. compared to the traditional analysis method, reducing the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Ideally suited for aseptic environments, the MiniCapt Remote Microbial Air Sampler simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Viable Microbial Sampler uses a unique HEPA-filtered exhaust so it doesn’t contaminate the cleanroom. With a small footprint, the MiniCapt ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler fitted with the yellow body diffusive barrier is best used for sampling outdoor ambient air with highly elevated mercury concentrations (50 ng/m3). This sampler has a thicker diffusive barrier, thereby reducing the effective sampling rate to lessen Hg capture by the device. The sampling time is typically hours up to 7 days, depending on the expected Hg levels and project ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating ...
-
PremiumManufactured by Samyang Corporationbased in SOUTH KOREA
TRILITE dry resin is used in gas-phase chemical filters designed to remove specific ions from the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Designed to enhance fixed Airborne Molecular Contamination (AMC) monitoring programs, the AirSentry II Mobile AMC Detection System is the first truly mobile system for monitoring airborne molecular contamination in cleanrooms. Mobility plays an important part in a strategic airborne molecular contamination monitoring program, allowing contamination sources to be quickly located, quantified and ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Econoair Plus L-12P personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery ...
-
PremiumManufactured by Silcarbon Aktivkohle GmbHbased in GERMANY
Air cleaning: In many industrial processes, toxic gaseous pollutants are emitted. Generally, these substances should not be released. Most of the toxic pollutants in the exhaust air are solvents, which are required for the production of consumer goods. For the removal and separation of these solvents (mostly hydrocarbons, and chlorinated hydrocarbons), the use of activated charcoal has been ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Econoair Plus L-15P personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammoniacontaining species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining Air Sentry II sensors with a central software ...
-
PremiumManufactured by Emcel Filters Limitedbased in UNITED KINGDOM
EMCEL hydrophobic Filters are used for the removal of airborne particle contaminants in damp and wet environments. EMCEL Filters continue to improve the products that are available to our clients. Hydrophobic media is one of the innovative ways we are improving our particulate filters. At present this media is available in various efficiencies from M5 to F9 and we hope to introduce HEPA ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II Multi-point Monitoring System is the most advanced airborne molecular contamination (AMC) monitor available, utilizing sensitive and responsive ion mobility spectrometry to detect and characterize airborne molecular contamination from multiple locations within a cleanroom. The system features a 16- or 30-point manifold sampling system and an on-board computer with secure software ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T9400 (100VAC) and the T9400E (200VAC) Series Air Samplers are lightweight, compact, high volume air samplers with a two-stage, thermally protected electric motor driven vacuum blower. The unit is equipped with a mounted on-off switch. The T9400/T9400E Air Samplers are equipped with a 4” (102 mm) standard filter holder. Each unit utilizes a heavy-duty polypropylene plastic ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
Through adsorption and oxidization Spectrum HS-600* will adequately control a large number of airborne contaminants. There are situations however, where a blend of this product's reactive chemistry and the adsorbent properties of activated carbon are advised. A common example is where hydrocarbons are present along with acid gases. In this environment, the higher molecular weight hydrocarbons may ...
-
PremiumManufactured by ENVEAbased in FRANCE
Pure air generator, capable of continuous delivery of up to 20 standard liters per minute (SLPM) of dry, contaminant-free air. The ZAG 7001 is a powerful stand-alone system: it does not require the supply of compressed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you