Air Contaminant Equipment For Air And Climate Available In Costa Rica
-
PremiumManufactured by Samyang Corporationbased in SOUTH KOREA
TRILITE dry resin is used in gas-phase chemical filters designed to remove specific ions from the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T9400 (100VAC) and the T9400E (200VAC) Series Air Samplers are lightweight, compact, high volume air samplers with a two-stage, thermally protected electric motor driven vacuum blower. The unit is equipped with a mounted on-off switch. The T9400/T9400E Air Samplers are equipped with a 4” (102 mm) standard filter holder. Each unit utilizes a heavy-duty polypropylene plastic ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
STS worked with NPL (National Physical Laboratory) to develop and commericialise a system that they had developed to prototype stage for the identification of contamination on surfaces and in particular on people. This system originally called "Fives" was designed to quantify amounts of airborne contaminants that would be deposited on a person under a range of different conditions. In particular ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers for airborne molecular contamination (AMC) detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammonia-containing species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
As part of a facility monitoring solution, the Airnet® II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Air Particle ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS Passive Air Sampler is the newest Tekran sampling solution developed to provide our customers a simple device for measuring mercury in a wide range of environments. The sampler can be configured to sample either background ambient air or highly-contaminated industrial locations. Since collection is passive, MerPAS sampling is completely power-free allowing easy deployment in a wide ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Excalibur Water Systems Industrial Cooling Tower Side Stream Filters offer turbidity filtration in simplex, or multi-tank models and designs utilizing PLC controls with touch screen HMI and renowned industry components and medias for trouble-free ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II Multi-point Monitoring System is the most advanced airborne molecular contamination (AMC) monitor available, utilizing sensitive and responsive ion mobility spectrometry to detect and characterize airborne molecular contamination from multiple locations within a cleanroom. The system features a 16- or 30-point manifold sampling system and an on-board computer with secure software ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Econoair Plus L-15P personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The ECONOAIR Premium L-12PTR is a low-cost high-performance personal air sampling pump. It is a simple model designed for sampling of asbestos, lead and other airborne contaminates. The rugged compact design features a rechargeable NiMH battery with available one-hour recharger. The L-12PTR can be programmed for timing routine activated sampling and allows the operator to select a reference T ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control, and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for a particular occasion. After dedusting by sampling probe, tracing by ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J ECONOAIR Premium L-5PTR personal air sampler consists of a pump contained in a high impact steel fiber filled Lexan, antistatic and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control (patent pending), an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism and a rechargeable NiMH battery pack. The L-5PTR can be programmed for ...
-
PremiumManufactured by Labconco Corporationbased in USA
Purifier Logic+ Class II, Type A2 Biosafety Cabinets provide personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are ...
-
PremiumManufactured by ENVEAbased in FRANCE
Pure air generator, capable of continuous delivery of up to 20 standard liters per minute (SLPM) of dry, contaminant-free air. The ZAG 7001 is a powerful stand-alone system: it does not require the supply of compressed ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The CEL-022 is an optical instrument designed to measure the visible opacity (0-100%) of exhaust gas in a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system. The CEL-022 is available with or without an Operator Interface (control unit), so for the most cost effective monitoring solution the CEL-022 can operate as a ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler is small in size and is compatible with personal sampling. For this configuration, the yellow body diffusive barrier is used without any protective housing. The sampler is attached to a plastic plate and then attached to the lapel or shirt pocket to keep the device near the worker breathing zone. Typically, the sampler would be worn for the the full 8-hour workday. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammoniacontaining species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining Air Sentry II sensors with a central software ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Designed to enhance fixed Airborne Molecular Contamination (AMC) monitoring programs, the AirSentry II Mobile AMC Detection System is the first truly mobile system for monitoring airborne molecular contamination in cleanrooms. Mobility plays an important part in a strategic airborne molecular contamination monitoring program, allowing contamination sources to be quickly located, quantified and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you