Air Contaminant Equipment For Air And Climate In South Korea
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers for airborne molecular contamination (AMC) detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammonia-containing species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining ...
-
PremiumManufactured by Samyang Corporationbased in SOUTH KOREA
TRILITE dry resin is used in gas-phase chemical filters designed to remove specific ions from the ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Ideally suited for aseptic environments, the MiniCapt Remote Microbial Air Sampler simplifies the job of microbial air sampling by applying modern data management capabilities that save time and reduce operator error in air sampling data. The MiniCapt Viable Microbial Sampler uses a unique HEPA-filtered exhaust so it doesn’t contaminate the cleanroom. With a small footprint, the MiniCapt ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II family of ion mobility spectrometers detect and alert users to small concentrations or changes in airborne levels of chlorides, acids, amines and ammoniacontaining species. With parts-per-trillion (ppt) sensitivity, these point-of-use sensors provide fast response, increased detection selectivity and repeatable performance. Combining Air Sentry II sensors with a central software ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Designed to enhance fixed Airborne Molecular Contamination (AMC) monitoring programs, the AirSentry II Mobile AMC Detection System is the first truly mobile system for monitoring airborne molecular contamination in cleanrooms. Mobility plays an important part in a strategic airborne molecular contamination monitoring program, allowing contamination sources to be quickly located, quantified and ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Researchers who work with PCR technologies, must ensure effective protection against the unintended transfer of nucleic acids. Analytik Jena‘s UVP PCR Workstations & Cabinets are exceptionally equipped to provide systemic protection against such ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The AirSentry II Multi-point Monitoring System is the most advanced airborne molecular contamination (AMC) monitor available, utilizing sensitive and responsive ion mobility spectrometry to detect and characterize airborne molecular contamination from multiple locations within a cleanroom. The system features a 16- or 30-point manifold sampling system and an on-board computer with secure software ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Purpose-built nano condensation particle counter CPC designed for use in the most critical fab spaces. The NanoAir™ 10 Condensation Particle Counter (CPC) is a revolutionary new product from Particle Measuring Systems (PMS). It provides the sensitivity of a CPC with the ease of use and functionality of a traditional cleanroom particle counter. Designed to monitor ultra-clean environments, ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
As part of a facility monitoring solution, the Airnet® II and IIs Particle Sensors from Particle Measuring Systems are an EU GMP Annex 1 solution that meets the specifications of ISO 21501-4 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. A simple and cost-effective way to monitor your cleanroom, the Airnet II Air Particle ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Airnet II is ideal for remote continuous particle monitoring as a component of a Facility Monitoring System. It meets the specifications of ISO 21501-4 and EU GMP Annex 1 to measure the size and number of particles suspended in the air for real-time monitoring of defect-causing particles. The Airnet II Particle Sensor provides unparalleled performance with data transmission capabilities for ...
-
PremiumManufactured by ENVEAbased in FRANCE
Pure air generator, capable of continuous delivery of up to 20 standard liters per minute (SLPM) of dry, contaminant-free air. The ZAG 7001 is a powerful stand-alone system: it does not require the supply of compressed ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler fitted with the yellow body diffusive barrier is best used for sampling outdoor ambient air with highly elevated mercury concentrations (50 ng/m3). This sampler has a thicker diffusive barrier, thereby reducing the effective sampling rate to lessen Hg capture by the device. The sampling time is typically hours up to 7 days, depending on the expected Hg levels and project ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
The regenerative thermal oxidizer from type Ecopure® RTO are characterized by a cost optimized, a standardised and a low maintenance design. The most modern process technology of the Ecopure® RTO allows a economic disposal of solvent-containing and offensive odour exhaust air with a efficiency of over 99,8%. Due to different design options the Ecopure® RTO is insertable universal. The ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The AD302L is a useful attachment for any laboratory's external source of air, removing moisture and ensuring the delivery of dry air. Moisture content in house air can contaminate lab instrumentation, impacting on results and in some cases damaging the instrument itself. Compact in size, wall-mountable and light, the AD302L requires little space and its few moving parts mean minimal maintenance ...
-
Manufactured by GSA – Global Standard Air/Gasbased in SOUTH KOREA
Compressed air dryer is as important as air compressors in order to keep your air system running at peak efficiency. All compressed air systems suffer from the common problems of dirt, oil and water contamination entering the system. These are intensified when air is ...
-
Manufactured by Tiger Optics - a brand by Process Insights, Inc.based in USA
Surveying different micro-environments in a fab is now fast and easy with our TIGER OPTICS GO-cart – the mobile solution for monitoring Airborne Molecular Contaminants (AMCs). It can be equipped with any combination of T-I Max analyzers to monitor simultaneously and in real-time for the most critical contaminants in cleanroom air: NH3, HCl and HF (other analytes available as well). All ...
-
Manufactured by Muntersbased in USA
The technology behind Munters' VOC technology is our Zeolite rotor. The rotor is made up of hydrophobic zeolite which is an inorganic crystal with properties suited to adsorbing VOCs. Hydrophobic zeolite is a stable crystal. The zeolite's inert properties mean that it does not promote chemical reactions. It is also non-flammable to extreme temperatures and will not react with strong ...
-
Manufactured by Dürr Systems, Inc.based in USA
Regenerative thermal oxidation (RTO) is used in many different industry sectors to purify exhaust air containing solvents and odors. This highly efficient regenerative thermal process contributes significantly toward environmental protection. The Oxi.X RA RTO series is especially suited to large exhaust air flow rates, high exhaust air temperatures and very low to high pollutant concentrations. ...
-
Manufactured by Tiger Optics - a brand by Process Insights, Inc.based in USA
Our TIGER OPTICS HALO KA Max CH4 methane CRDS gas analyzer is built on our extraordinary customer-acknowledged and our renowned time-based technology – Continuous-Wave Cavity Ring-Down Spectroscopy (CRDS) users can verify methane impurity levels down to 500 ppt or less in semi bulk gases, with drift-free stability and virtually instant response to upsets. Our HALO KA Max CH4 offers ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
The AD70L is a useful attachment for any laboratory's external source of air, removing moisture and ensuring the delivery of dry air. Moisture content in house air can contaminate lab instrumentation, impacting on results and in some cases damaging the instrument itself. Compact in size, wall-mountable and light, the AD70L requires little space and its few moving parts mean minimal maintenance is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you