Air Dehumidification Equipment For Air And Climate Available In Poland
-
Manufactured by Dri-Eaz Products, Inc., A BRAND OF LEGEND BRANDSbased in USA
Extend the reach of drying and ventilation. Lightweight and durable 4-mil polyethylene is unaffected by moisture and most chemicals. Ideal for use with air scrubbers, negative air machines, and dehumidifiers. Layflat ducting for use on 8 in. duct outlets. 500 ft. (152 m) roll. Cut to ...
-
Manufactured by Eneko Heat Recovery Ventilationbased in TURKEY
The EDH Series Dehumidification Units are used in areas where dehumidification is needed, such as indoor swimming ...
-
Manufactured by Kmaire Air Treatment Equipment Co.,Ltdbased in CHINA
ZCKJL series Desiccant Dehumidifier with air conditioning units can reach temperature 23˚C /relative humidity 10-50% requirements.Regenaration energy comsuption can be saved 30%,dry air temperature can be reduced ...
-
Manufactured by Shanghai Thenow Purification Technology Co.,Ltdbased in CHINA
In industrial environment, the harm caused by excessive humidity is not negligible. Excessive humidity can lead to corrosion, such as corrosion of steel with a humidity of more than 60%. Electrical equipment operates over a longer period of time in an environment where humidity exceeds 70%, easy to damage and cause accidents. Industrial materials also reduce storage time in environments with ...
-
Manufactured by Kmaire Air Treatment Equipment Co.,Ltdbased in CHINA
ZCKL Combined Series can reach temperature 23˚C /relative humidity 10-50% requirements. Regeneration energy comsuption can be saved 30%.Dry Air temperature can be reduced ...
-
Manufactured by Logis-Tech, inc.based in USA
The MDU–750PPC has an output of 750 SCFM and is designed for application on large body aircraft such as the C-130, KC-135 and C-17 on the flight line or in a hangar setting or storage area application. The MDU is fully air transportable and meets all current Military safety and usage requirements for flight line operations or for hangar use or around storage rooms. Equipped with a ...
-
Manufactured by Thermobile UK Ltdbased in UNITED KINGDOM
ProDry 35/55 equipped with condensate collection tank with overflow prevention. Connection for fixed drainage (ProDry 80 standard). Quick dehumidification of the air. Compact dehumidifiers with high capacities. Heavy-duty handle makes transport easier. Control panel with warning lights for defrosting and full tank. Fully automatic operation with electronic control of condensation and defrosting ...
-
Manufactured by Hangzhou Greeme Environmental Technology Co., Ltd.based in CHINA
The unit has a delicate design and high-quality unit, which guarantee stable performance and long service life. Configured with a high heat transfer efficiency, high and low voltage protection, anti-freeze protection, current overload protection device, compact structure, thus running low vibration, low noise, the dehumidification large, Select according to your room or send the requirement, ...
-
Manufactured by Blowtech Engineers Private Limitedbased in INDIA
Air Handling Units supply fresh air to the room as these take air from outside, filter it and recondition it (heated by a heating coil or cooled by a cooling coil). Vertical air handling unit can be installed in a room where air can be re-circulated for energy saving purposes. These Air Handling Units are generally fitted with a heat/cooling exchanger for increasing capacity and energy saving. ...
-
Manufactured by Flakt Woods Group SAbased in SWITZERLAND
Elegant design combined with modern technology of dehumidification. Energy efficiency. Easy on the building substance. Compact and space saving. Flexible. ...
-
Manufactured by Dedert Corporationbased in USA
Dedert's multi-stage spray dryers include the following equipment/features: Rotary or nozzle atomization with adjustable design for optimal contact of atomized droplet and powder fines, Production of non-dusty, free-flowing products, Powder is easily dispersible and re-wetable, Lower bulk density and particle size from 100 - 500 microns, Agglomeration using fines recycle and re-introduction to an ...
-
based in GERMANY
For a simultaneous measuring of PM , PM and Pm (or TSP) in real-time plus - optionally - rel. humidity, temperature, wind speed, wind direction, precipitation and atm. pressure All data are online to the world wide ...
-
Manufactured by RD Grupbased in TURKEY
Air flow capacity between 6000 and 19000 m3/h. 300 Pa external static pressure. Dehumidification capacity between 40 and 124 kg/h. EC/AC motor & plug fan/AC motor &radial fan. Cross flow polymer asymetric heat exchanger. Advanced automatic control system. Free cooling. M5 Filter. 50 mm panel ...
-
Manufactured by Guangzhou Shincci Energy Equipment Co., Ltd.based in CHINA
One integrate module: Heat pump + mesh belt + insulation board, easier on-site installation. Upgraded corrosion resistance: condenser, evaporator and refrigerant pipelines, heat pump support are SUS316L. Hot water/Gas/Generator waste heat can be utilized. Two modules share one belt-driven type blower, which makes cleaning and maintenance easier. Flexibility and efficiency on overhaul ...
-
Manufactured by Dessica - Dry Air Technicsbased in FRANCE
These dehumidification systems include the latest innovations for absorption desiccant rotors and use the new energy saving system (Dessica’s patent). This new feature optimizes the rotation speed of the desiccant rotor in correlation with the evolution of the temperature and humidity conditions of the air to be treated. ...
-
Manufactured by Seibu Giken Co., Ltd.based in JAPAN
This series achieves energy efficiency, high power and high performance. This is the best choice for use with existing environmental testing equipment, and provides great dehumidification control, even in low temperatures at or below 10°C. The product can be used for applications down to around 15% relative humidity. It’s simple and compact design allows for easy operation and ...
-
Manufactured by Trotec GmbHbased in GERMANY
Desiccant dehumidifier with extensive equipment and a colossal dehumidification performance of 55 kg/h. Maximum dry air flow rate even with a low dew point. With about 1,322 kilogrammes of dehumidification performance per day and a nominal air volume of 9,800 cubic metres of dry air per hour at a static pressure of 300 Pa the TTR 10000 is optimally prepared even for a high dry air demand in cold ...
-
Manufactured by GSA – Global Standard Air/Gasbased in SOUTH KOREA
With a high-efficiency aluminum heat exchanger, GSA refrigerated air dryer offers great dehumidifying performances and stable dew points with a larger heat exchange area and greater efficiency than other types of heat exchangers. SA’s aluminum heat exchanger is divided into three different parts: i) air-air heat exchanger, ii) air-refrigerant heat exchanger, iii) oversized thermister ...
-
Manufactured by Tecnoclima Spabased in ITALY
Rooftops CF-GAS are the ideal solution for the complete treatment of the air in medium-sized and large environments, as for commercial so for industrial sector. In fact, the appliance integrates the technologies for filtering, heating, cooling, air renewal and air ...
-
Manufactured by van Dijk heating B.V.based in NETHERLANDS
AVS-C is an active ventilation system with an extra cooling block. With this system, the air inside the greenhouse is cooled by removing sensible and latent heat from the air flow inside the greenhouse. The heat can be stored for later use. This system also enables the pre-night temperature inside the greenhouse to be rapidly lowered to the desired ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you