Air Dispersion Modeling Equipment For Air And Climate Near Kiribati
-
Manufactured by TSI Incorporatedbased in USA
The Particle Generator Model 8026 is a unique instrument that supplements the ambient particle count, allowing the PortaCount Pro+ Respirator Fit Tester to be operated in areas where the normal particle count is not sufficient. TSI is the leader in quantitative respirator fit testing. The PortaCount Pro+ Respirator Fit Tester provides the most advanced, easy to use, and reliable fit test method ...
-
Manufactured by TSI Incorporatedbased in USA
Aerosol Generator Model 3076 is a Collison-type atomizer that generates aerosols of constant particle size in concentrations over 107 particles/cm3. Its nominal aerosol flow rate is 3.0 L/min. Stainless-steel components make it suitable for the specialized applications listed below, in additon to basic aerosol research. ...
-
Manufactured by TSI Incorporatedbased in USA
The Filtered Air Supply is a vital accessory for most aerosol generators. It removes oil or other liquid droplets from the incoming air using two prefilters. It also removes any remaining moisture in the air stream by passing the air through an advanced membrane. (No more drying of desiccant material!) Plus, it removes fine particles by including a high-efficiency filter at the ...
-
Manufactured by International Ozone Technologies Group, Inc. (IOTG)based in USA
The 365nm to 385nm UVA Rays emitted from Titan's TiO2 Photocatalytic Lamps pass through a 2 Permanent Anatase TiO2 Coated Super Reactor Screens which is designed to hold the maximum amount of Highly Reactive Nano Sized Anatase Titanium Dioxide, and as a result, electron hole pairs are formed that react with H20 and O2 in the air and produce Free Electrons, Hydroxyl Radicals and Ionized ...
-
Manufactured by International Ozone Technologies Group, Inc. (IOTG)based in USA
The 365nm to 385nm UVA Rays emitted from Titan's TiO2 Photocatalytic Lamps pass through a Permanent Anatase TiO2 Coated Super Reactor Screen which is designed to hold the maximum amount of Highly Reactive Nano Sized Anatase Titanium Dioxide, and as a result, electron hole pairs are formed that react with H20 and O2 in the air and produce Free Electrons, Hydroxyl Radicals and Ionized ...
-
Manufactured by International Ozone Technologies Group, Inc. (IOTG)based in USA
True hydroxyl generators utilize water vapor in the atmosphere to create hydroxyl radicals. The Titan technology works by creating a reaction between UVA, Ti02 and H20 to break apart the water molecule (H20) and create a single hydrogen atom (H) a Hydroxyl Radical (OH) and Ionized Hydro- Peroxide (H2O2). This Hydroxyl Radical and Hydro-Peroxide will disperse into the air and deodorize, oxidize ...
-
Manufactured by International Ozone Technologies Group, Inc. (IOTG)based in USA
The 365nm to 385nm UVA Rays emitted from Titan's TiO2 Photocatalytic Lamps pass through a Permanent Anatase TiO2 Coated Super Reactor Screen which is designed to hold the maximum amount of Highly Reactive Nano Sized Anatase Titanium Dioxide, and as a result, electron hole pairs are formed that react with H20 and O2 in the air and produce Free Electrons, Hydroxyl Radicals and Ionized ...
-
Manufactured by Breeze Technologies UGbased in GERMANY
When you are planning and implementing clean air measures in your city, it is important to have a full picture of the baseline situation and the impact of your clean air interventions. That is why our air quality sensors are equipped with sensing units for all common air pollution indicators by ...
-
Manufactured by Fogco Systems, Inc.based in USA
The Revolution misting fan is the flagship of the Desert Fog Fan product range. Due to its unique design, it provides improved evaporative cooling and humidification. By including a horizontal deflector plate, the fan can produce a more uniformed distribution of the fog and improved absorption of the ...
-
Manufactured by JDMIX, Inc.based in USA
The JDMIX, Inc. “J” Series inline mixers are specifically designed for use where additives to the main pipeline flow have already been introduced upstream of the mixer. These unique inline mixers have four mixing zones between each element set. Inside each zone, the increased turbulence realized ensures that the chemical additives are dispersed throughout the circumference of the ...
-
Manufactured by JDMIX, Inc.based in USA
The JDMIX, Inc. “D” Series inline mixers are specifically designed for use where an additive to the main pipeline flow can be injected right into the mixer body. These unique inline mixers have four mixing zones between each element set. Inside each zone, the increased turbulence realized ensures that the chemical additives are dispersed throughout the circumference of the pipeline. ...
-
Manufactured by Plymovent Group BVbased in NETHERLANDS
The MultiDust Bank filter is a modular filter system which can be tailored to the requirements of your application today and expanded tomorrow if your business grows. The efficient and effective performance of each module also allows compact solutions. The range of technical features and the latest filter technology results in a filter system that is cost-effective to operate and ...
-
Manufactured by OMI Industries (OMI)based in USA
Throughout the atomization process, Ecosorb odor eliminator is mixed with water, pumped through pipes/hoses and delivered via nozzles or fans to areas affected by odor. After the Ecosorb droplets are dispersed into the air they neutralize odors on contact. The major advantage of atomization nozzle systems is the level of control they provide. Through various means of control, depending on system ...
-
Manufactured by Inyo Processbased in USA
Multi-Orifice Threaded Injection Quills are excellent for even chemical dispersion across an entire pipe diameter. Quills are available in all ...
-
Manufactured by Inyo Processbased in USA
Mixing Tees are a simple, cost effective method of providing chemical diffusion to a system. Mixing tees typically have been offered in both a wafer style. We have now added to our product line a pipe spool configuration. There is little or no pressure drop across these devices, which rely on advanced chemical dispersion techniques. Inyo mixing tees use custom designed injectors and now we have ...
-
Manufactured by Wahlco, Inc.based in USA
Aqueous Ammonia is a safer ammonia reagent for SCR applications than anhydrous ammonia; however it is more expensive on a delivered basis due to the large amount of water transported. Additionally in the case of 19% aqueous ammonia, there will be approximately five times as many deliveries as anhydrous ammonia. Operating costs are also higher due to the energy required to vaporize the ...
-
Manufactured by Process & Control Technologies, Inc.based in UNITED ARAB EMIRATES
PACT extended aeration process offers certain benefits that can be combined with conventional processes to obtain a high quality effluent. Extended aeration agitates all incoming waste in the sludge from a single classifier. The combined sludge starts with a higher concentration of inert solids than typical secondary sludge and the longer mixing time required for digestion of primary solids in ...
-
Manufactured by Process & Control Technologies, Inc.based in UNITED ARAB EMIRATES
PACT's range of municipal and domestic sewage treatment systems range from the compact containerized steel packages for small communities to large city-scale ...
-
Manufactured by Saf-T-Flo Water Servicesbased in USA
The OCDL series diffuser allows for one of two installation orientations. It can be mounted perpendicular to the flow, spanning the width of a channel or it can mounted along a channel wall parallel to the flow. Either orientation can help aid dispersion of chemical along the process flow of an open channel. Due to the variety of mounting conditions, mounting hardware is not ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you