MACT regulation Articles
-
Widespread Applicability and Energy Assessment highlight the Proposed New Boiler MACT Rules
As we reported in last month’s 4 The Record, April 29, 2010 was a busy day for U.S. EPA and marked the culmination of years of background effort and planning related to air toxic emissions from boilers. U.S. EPA has proposed four (4) rules that, when finalized, will impact thousands of facilities. Two (2) of these rules are intended to reduce emissions of toxic air pollutants from boilers ...
By All4 Inc.
-
LDAR deficiencies lead to enhanced requirements
Leak detection and repair (LDAR) programs are required as part of the standards established in 40 Code of Federal Regulations (CFR) 60 (NSPS), 40 CFR 61 (NESHAP), 40 CFR 63 (MACT), and 40 CFR 264 (Hazardous Waste Handling). An LDAR program is a facility’s system of procedures used to locate and repair leaking components (e.g., valves, pumps, connectors, compressors, and agitators) to ...
-
Strategy for Complying with Air Pollution Control Regulations in the Chemical Industry
Untitled Document The Clean Air Act (CAA) was originally passed by the United States Congress in 1970 and subsequently revised in 1977 for the purpose of protecting human health and the environment. In 1990, then-President George Bush signed the Clean Air Act Amendments. The far-reaching impacts of the 1990 amendments added significantly to the regulatory challenges ...
-
Global solution: Gas and particulate analysis in Cement industry
Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...
By ENVEA
-
Total solution: Gas and particulate analysis in Cement industry
Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...
By ENVEA
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you