Air Emissions Equipment For Air And Climate Available In Bolivia
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-100/MS-1000 is a self-developed online dust analysis product and a dust particle measuring device, adopting laser backward scattering measuring technology with imported core components. The DMS-100/MS-1000 dust particle measuring device is mainly used for continuous monitoring of PM emission concentrations of various pollution sources. The DMS-100/MS-1000 dust particle measuring device can be ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
The Mobile tracked screener provides the end user with a high output of finished products In sand and gravel, aggregate recycling, top soil and coal mining applications. Up to 5 sizes of material can be produced simultaneously, thus giving the user considerable added value. Easy to transport. Quick to set up. Easy to operate and ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The Continuous Emission Monitoring System (CEMS) EM-GAS-500 developed and produced by ESE is to monitor the total air pollutant emissions from stationary sources, mainly used for industrial boilers, power plant boilers, industrial furnaces emissions monitoring, SO2, NO,NO2, O2,CO,CO2,HCL,HF, H2O etc dynamic continuous monitoring, simultaneous to measure gas flow, oxygen content, gas pressure, gas ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-200 dust monitor is a self-developed probe-in monitor, based on years of research on dust detection technology. Different from traditional back scattering dust monitor (such as DMS-100/MS-1000), DMS-200 installs a dust measurement module at the top of the probe, which directly stretches into the stack for dust measurement in close distance and it adopts laser forward scattering method to ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Advanced technology, reliability, high efficiency and yield, smart control, compact design, easy relocation, convenient maintenance, It's widely applied in construction and demolition projects, mine s h red ding, sand,stone and aggregate ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
OPSIS CEM systems measure multiple emissions or process gases in real time in situ. Using the DOAS (Differential Optical Absorption Spectroscopy) technique, the system is non-contact, with fast ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Digital pyrometer with fixed optics for non-contact temperature measurement of non-metallic surfaces or painted, coated or anodized metals between -32 and 900 °C. The Impac IN 5 plus series infrared thermometers are specially designed for non-contact temperature measurements on non-metallic surfaces and also on painted, coated or anodized metals. These instruments are digital pyrometers ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
The plates of settler W-Tank are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic pieces with high glass fiber content, arranged in the direction of the stress, which leads to high mechanical ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Advanced technology, reliability, high effiffifficiency and yield, smart control, compact design, easy relocation, and convenient maintenance. It's widely applied in construction and demolition projects, mine shredding, s and, stone, and aggregate ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Principle : ESE-LASER-HCL-200P Portable laser gas analyzer using a Tunable Diode Laser Absorption Spectroscopy (TDLAS), the realization of the non-contact measurement in high temperature, high pressure, high dust and other harsh test conditions. High selective laser based on frequency, analyzer has good performance of anti interference. compared to the traditional analysis method, reducing the ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The zero gas generator provides clean and dry zero-level air. It is mainly applied to zero calibration of ambient air quality monitoring system or analyzer. It can also be used as flushing gas in permeation tube & furnace and oxidant gas for FID analyzer. Zero gas generator includes external oil-free air compressor, pressure and flow controller, water removal system. Based on adsorption, ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
The mobile heavy-duty screener is durable, powerful and with high-performance and a huge capacity. It is capable of screening and separating a wide range of materials in complex and high-demanding applications, such as concrete, asphalt, construction & demolition waste, and quarry, ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GA-5000DN is based on a tunable semiconductor laser absorption spectroscopy (TDLAS) technology principle, including three parts: pretreatment, gas analysis module and data processing and display. After dedusting by sampling probe, tracing by heating pipe, the measured gas is analyzed by the hot gas analysis module (TDLAS technique). It is an effective solution to the technical problem that ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Sekidenko OR4000E delivers precision temperature measurement, using active-emissivity compensation for accurate measurement and control under changing-emissivity conditions. Configurable wavelength based on material type and required temperature range. Multi-channel measurement capabilities using remote lensed optical sensors or sapphire light pipes for in-situ measurement. Both analog and ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Ammonia analyzer (NH3) at ppm level Ambient air and Emission ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Bolted storage W-Tank is a light tank, easy to install and thanks to its corrosion-free composition. The plates of storage W-Tank are manufactured by flex molding process. The Flex Molding process is used to obtain reinforced plastic pieces with high glass fiber content, arranged in the direction of the stress, which leads to high mechanical strength. It consists of injecting a reactive polymer ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you